Off-Peak Use Sample Clauses

Off-Peak Use. Where gas service is used for central air-conditioning equipment having a rated capacity of not less than two tons of refrigeration the Commodity Charge for the therms used for all purposes in excess of 50 therms in any month during the Off-Peak period shall be 40.568(cents) per therm. The Off-Peak period shall commence and end with the regularly scheduled meter readings in the months of April and October, respectively, but Public Service may change such period depending upon load conditions on its system. STANDARD TERMS AND CONDITIONS: This rate schedule is subject to the Standard Terms and Conditions on Sheets Nos. 6 to 18, inclusive of this Tariff. Date of Issue: November 14, 1986 Effective: October 31, 1986 Issued by XXXXXXXX X. XX XXXXX, Senior Vice President--Customer Operations 00 Xxxx Xxxxx, Xxxxxx, Xxx Xxxxxx 00000 Filed pursuant to Order of Board of Public Utilities, dated October 31, 1986 in Docket No. ER85121163 PUBLIC SERVICE ELECTRIC AND GAS COMPANY Second Revised Sheet Xx. 00 Xxxxxxxxxxx X.X.X.X.X. Xx. 00 GAS First Revised Sheet No. 22 RATE SCHEDULE GSG GENERAL SERVICE APPLICABLE TO USE OF SERVICE FOR: General purposes. CHARACTER OF SERVICE:
Sample 1
AutoNDA by SimpleDocs
Off-Peak Use. Where gas service in commercial and industrial establishments is used for cooling for dehumidification and supplied through a separate meter, the Commodity Charge for the therm used in the Off-Peak period shall be 40.568 cents per therm. The Off-Peak period shall commence and end with the regularly scheduled meter readings in the months of April and October, respectively, but Public Service may change such period depending upon load conditions on its system.
Sample 1
Off-Peak Use. Where separately metered gas service (1) is used for building cooling or dehumidification or (2) is to boilers, used in whole or in part to supply the requirements of absorption air-conditioning equipment of 100 tons or more nominal capacity, the rate during the off-peak period shall be 40.568 cents per therm. However, such off-peak rate shall not be applicable until the first 500 therms have been billed at the first block of the Commodity Charge. The Off-Peak period shall commence and end with the regularly scheduled meter readings in the months of April and October, respectively, but Public Service may change such period depending upon load conditions on its system.
Sample 1

Related to Off-Peak Use

  • Voice Grade Unbundled Copper Sub-Loop Unbundled Sub-Loop Distribution – Intrabuilding Network Cable (aka riser cable)

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety

  • Unbundled Sub-Loop Feeder 2.8.4.1 Unbundled Sub-Loop Feeder (USLF) provides connectivity between BellSouth's central office and cross-box (or other access point) that serves an end user location. 2.8.4.2 USLF utilized for voice traffic can be configured as 2-wire voice (USLF-2W/V) or 4-wire voice (USLF-4W/V). 2.8.4.3 USLF utilized for digital traffic can be configured as 2-wire ISDN (USLF-2W/I); 2-wire Copper (USLF-2W/C); 4-wire Copper (USLF-4W/C); 4-wire DS0 level loop (USLF-4W/D0); or 4-wire DS1 and ISDN (USLF-4W/DI). 2.8.4.4 USLF will provide access to both the equipment and the features in the BellSouth central office and BellSouth cross box necessary to provide a 2W or 4W communications pathway from the BellSouth central office to the BellSouth cross- box. This element will allow for the connection of Lightyear’s loop distribution elements onto BellSouth's feeder system.

  • Unbundled Copper Sub-Loop (UCSL) is a copper facility of any length provided from the cross-box in the field up to and including the end-user’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the end-user and the cross-box.

  • Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

  • COVID-19 Vaccine Passports Pursuant to Texas Health and Safety Code, Section 161.0085(c), Contractor certifies that it does not require its customers to provide any documentation certifying the customer’s COVID-19 vaccination or post-transmission recovery on entry to, to gain access to, or to receive service from the Contractor’s business. Contractor acknowledges that such a vaccine or recovery requirement would make Contractor ineligible for a state-funded contract.

  • If there is a permitted secondary offering (1) If the Issuer is an emerging issuer and you have sold in a permitted secondary offering 10% or more of your escrow securities, your escrow securities will be released as follows: For delivery to complete the IPO All escrow securities sold by you in the permitted secondary offering 6 months after the listing date 1/6 of your remaining escrow securities 12 months after the listing date 1/5 of your remaining escrow securities 18 months after the listing date 1/4 of your remaining escrow securities 24 months after the listing date 1/3 of your remaining escrow securities 30 months after the listing date 1/2 of your remaining escrow securities 36 months after the listing date your remaining escrow securities *In the simplest case, where there are no changes to the remaining escrow securities upon completion of the permitted secondary offering and no additional escrow securities, the release schedule outlined above results in the remaining escrow securities being released in equal tranches of 16 2/3%. (2) If the Issuer is an emerging issuer and you have sold in a permitted secondary offering less than 10% of your escrow securities, your escrow securities will be released as follows: For delivery to complete the IPO All escrow securities sold by you in the permitted secondary offering On the listing date 1/10 of your original number of escrow securities less the escrow securities sold by you in the permitted secondary offering 6 months after the listing date 1/6 of your remaining escrow securities 12 months after the listing date 1/5 of your remaining escrow securities 18 months after the listing date 1/4 of your remaining escrow securities 24 months after the listing date 1/3 of your remaining escrow securities 30 months after the listing date 1/2 of your remaining escrow securities 36 months after the listing date your remaining escrow securities *In the simplest case, where there are no changes to the remaining escrow securities upon completion of the permitted secondary offering and no additional escrow securities, the release schedule outlined above results in the remaining escrow securities being released in equal tranches of 16 2/3% after completion of the release on the listing date.

  • Assumed Business Names Borrower has filed or recorded all documents or filings required by law relating to all assumed business names used by Borrower. Excluding the name of Borrower, the following is a complete list of all assumed business names under which Borrower does business: None.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CSTC chooses to subtend a Verizon access Tandem, CSTC’s NPA/NXX must be assigned by CSTC to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 CSTC shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from CSTC’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office CSTC utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow CSTC’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!