Plans, Specifications and Contracts Sample Clauses

Plans, Specifications and Contracts. In order for there to be mutual agreement on the following matters, and except as the Parties may otherwise agree in writing: (a) The Grantee will furnish to USAID upon preparation: (1) any plans, specifications, procurement or construction schedules, contracts, or other documentation between the Grantee and third parties, relating to goods or services to be financed under the Agreement, including documentation relating to the prequalification and selection of contractors and to the solicitation of bids and proposals. Material modifications in such documentation will likewise be furnished USAID on preparation; and (2) such documentation will also be furnished to USAID, upon preparation, relating to any goods or services, which, though not financed under the Agreement, are deemed by USAID to be of major importance to the Agreement. Aspects of the Agreement involving matters under this subsection (a)(2) will be identified in Implementation Letters. (b) Documents related to the prequalification of contractors, and to the solicitation of bids or proposals for goods and services financed under the Agreement will be approved by USAID in writing prior to their issuance, and their terms will include United States standards and measurements; (c) Contracts and contractors financed under the Agreement for engineering and other professional services, for construction services, and for such other services, equipment, or materials as may be specified in Implementation Letters, will be approved by USAID in writing prior to execution of the contract. Material modifications in such contracts will also be approved in writing by USAID prior to execution; and (d) Consulting firms used by the Grantee for the Agreement but not financed under the Agreement, the scope of their services and such of their personnel assigned to activities financed under the Agreement as USAID may specify, and construction contractors used by the Grantee for the Agreement but not financed under the Agreement, shall be acceptable to USAID.
AutoNDA by SimpleDocs
Plans, Specifications and Contracts. Except as A.I.D. may otherwise agree in writing, the Borrower shall furnish to A.I.D., promptly upon prep2.ration, all plans, specifications, bid documents and contracts relating to each sub-project, and any modifications· therein, whether or n ot the goods and services to which they relate are financed under the Loan.
Plans, Specifications and Contracts. In order for there to be mutual agreement on the following matters, and except as the ·Parties nay otherwise agree in writing:� · •
Plans, Specifications and Contracts. In order for there to be mutual agreement on the following matters, and except as the Parties may otherwise approve in writing: (a) The Grantee shall furnish to USAID upon preparation: (1) any plans, specifications, procurement or construction schedules, contracts, or other documentation between the Grantee and third parties, relating to goods or services to be financed under the Agreement, including documentation relating to the prequalification and selection of contractors and to the solicitation of bids and proposals. Material modifications in such documentation will likewise be furnished USAID on preparation; and (2) such documentation shall also be furnished to USAID, upon preparation, relating to any goods or services, which, though not financed under the Agreement, are deemed by USAID to be of major importance to the Agreement. Aspects of the Agreement involving matters under this subsection (a)(2) will be identified in Implementation Letters. (b) Documents related to the prequalification of contractors, and to the solicitation of bids or proposals for goods and services financed under the Agreement will be approved by USAID in writing prior to their issuance, and their terms will include United States standards and measurements;
Plans, Specifications and Contracts. In order for there to be mutual agreement on the following matters, and except as the Parties may otherwise agree in writing: (a) The Grantee will furnish to USAID upon preparation:
Plans, Specifications and Contracts. In order for th�re to be mutual agreement on the following matters, and except as the Parties may otherwise agree in writing: (a) The Coo�erating Country will furnish to A.I.D. upon preparation; (1) any plans, specifications, procurement or construction schedules, contracts, or other documentation relating to goods or services to be financed under the Assistance, including documentation relating to the prequalification and selection of contractors and to the solicitation of bids and proposals. Material modifications in such documentation will likewise be furnished A.I.D. on preparation; (2) such documentation will also be furnished to A.I.D., upon preparation, relating to any goods or services which, though not financed under the .Assistance, are deemed by A.I.D. to be of major importance to the Project. Aspects of the Project involving matters under this subsection (a) (2) will be identified in Project Implementation Letters; (b) Documents related to the prequalification of contractors, and to the solicitation of proposals for goods and services financed under the Assis�ance will be approved by A.I.D. in writing prior to their issuance, and their terms will include United States standards and measurements. Annex 2 (c) Cc•c-' : i' C ;s ,n:·.C:� c ;nt.rae; cors Lir:' .Ilced undor the Assistance for engineering and and other professional services, for const:::uction services, and for such other servic �. equipment or rnat-erials as n,c1 be specified in 1-'roject I mplementation Letters, will be approved by Ao I. D. i.n w:::·iting pr:i_or to m:ccution of the contract. �terial modifica· · tions in such e;ont:o: ts w j2.l .:.2: :.J be :.1pproved i:c1 writing by A, I.D. prfor 'to execution; (d) Commltir.:

Related to Plans, Specifications and Contracts

  • Attachment  C_ CONTRACT AFFIRMATIONS For purposes of these Contract Affirmations, HHS includes both the Health and Human Services Commission (HHSC) and the Department of State Health Services (DSHS). System Agency refers to HHSC, DSHS, or both, that will be a party to this Contract. These Contract Affirmations apply to all Contractors and Grantees (referred to as “Contractor”) regardless of their business form (e.g., individual, partnership, corporation). By entering into this Contract, Contractor affirms, without exception, understands, and agrees to comply with the following items through the life of the Contract:

  • General specifications For the purpose of this Regulation, the vehicle shall fulfil the following requirements:

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • Packing Specifications 7.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • Change Orders and Contract Amendments 33.1 The Procuring Entity may at any time order the Supplier through notice in accordance GCC Clause 8, to make changes within the general scope of the Contract in any one or more of the following: a) drawings, designs, or specifications, where Goods to be furnished under the Contract are to be specifically manufactured for the Procuring Entity; b) the method of shipment or packing; c) the place of delivery; and d) the Related Services to be provided by the Supplier. 33.2 If any such change causes an increase or decrease in the cost of, or the time required for, the Supplier's performance of any provisions under the Contract, an equitable adjustment shall be made in the Contract Price or in the Delivery/Completion Schedule, or both, and the Contract shall accordingly be amended. Any claims by the Supplier for adjustment under this Clause must be asserted within twenty-eight (28) days from the date of the Supplier's receipt of the Procuring Entity's change order. 33.3 Prices to be charged by the Supplier for any Related Services that might be needed but which were not included in the Contract shall be agreed upon in advance by the parties and shall not exceed the prevailing rates charged to other parties by the Supplier for similar services.

  • Specifications That part of the Contract Documents consisting of written requirements for materials, equipment, systems, standards, and workmanship as applied to the Work, and certain administrative requirements and procedural matters applicable thereto. The term "Specifications" shall also include all written matter in the Project Manual or on the drawings and any Addenda or Change Orders thereto.

  • ESTIMATED / SPECIFIC QUANTITY CONTRACTS Estimated quantity contracts, also referred to as indefinite delivery / indefinite quantity contracts, are expressly agreed and understood to be made for only the quantities, if any, actually ordered during the Contract term. No guarantee of any quantity is implied or given. With respect to any specific quantity stated in the contract, the Commissioner reserves the right after award to order up to 20% more or less (rounded to the next highest whole number) than the specific quantities called for in the Contract. Notwithstanding the foregoing, the Commissioner may purchase greater or lesser percentages of Contract quantities should the Commissioner and Contractor so agree. Such agreement may include an equitable price adjustment.

  • Plans and Specifications Tenant shall be solely responsible for the preparation of the final architectural, electrical and mechanical construction drawings, plans and specifications (called “plans”) necessary for Tenant to construct the Premises for Tenant’s occupancy, which plans shall be subject to approval by Landlord’s architect and engineers and shall comply with their reasonable requirements to avoid aesthetic or other conflicts with the design and function of the balance of the Building. Landlord’s approval is solely given for the benefit of Landlord, and neither Tenant nor any third party shall have the right to rely upon Landlord’s approval of Tenant’s plans for any purpose whatsoever other than that Landlord does not object thereto under this Lease. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan submission by Tenant within 8 business days after Landlord’s receipt thereof. If Landlord fails to respond to any such submission within such 8 business day period, which failure continues for more than 2 business days after Tenant gives Landlord a written notice (the “Deemed Approved Notice”) advising Landlord that such plan submission shall be deemed approved within 2 business days of Landlord’s receipt of the Deemed Approved Notice, then such plan submission shall be deemed approved hereunder. The Deemed Approved Notice shall, in order to be effective, contain on the first page thereof, in a font at least twice as large as the font of any other text contained in such notice, a legend substantially as follows: “FAILURE TO RESPOND TO THIS NOTICE WITHIN TWO (2) BUSINESS DAYS AFTER RECEIPT HEREOF SHALL CONSTITUTE LANDLORD’S APPROVAL OF SUBMITTED PLANS.” In the event Landlord’s architect’s or engineers’ approval of Tenant’s plans is withheld or conditioned, Landlord shall send prompt written notification thereof to Tenant and include a reasonably detailed statement identifying the reasons for such refusal or condition, and Tenant shall promptly have the plans revised by its architect to incorporate all reasonable objections and conditions presented by Landlord and shall resubmit such plans to Landlord. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan re-submission by Tenant within 8 business days after Landlord’s receipt thereof. Such process shall be followed until the plans shall have been approved by Landlord’s architect and engineers without unreasonable objection or condition. Without limiting the foregoing, Tenant shall be responsible for all elements of the design of Tenant’s plans (including, without limitation, compliance with law, functionality of design, the structural integrity of the design, the configuration of the Premises and the placement of Tenant’s furniture, appliances and equipment), and Landlord’s approval of Tenant’s plans shall in no event relieve Tenant of the responsibility for such design. Tenant agrees it shall be solely responsible for the timely preparation and submission of all such plans and for all elements of the design of such plans and for all costs related thereto. (The word “architect” as used in this Section 3.2 shall include an interior designer or space planner.) Tenant shall reimburse Landlord Landlord’s reasonable out-of-pocket expense incurred in connection with the review of Tenant’s plans.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!