Processing of E.I. Form. The Employer will make every effort to hasten the processing of Records of Employment consistent with E.I. guidelines and to enlist the assistance of the E.I. to expedite the processing.
Processing of E.I. Form Sample Clauses
Related to Processing of E.I. Form
Processing of a Grievance It is recognized and accepted by the Union and the Employer that the processing of grievances as hereinafter provided is limited by the job duties and responsibilities of the employees and shall therefore be accomplished during normal working hours only when consistent with such employee duties and responsibilities. The aggrieved employee and a Union representative shall be allowed a reasonable amount of time without loss of pay when a grievance is investigated and presented to the Employer during normal working hours provided that the employee and the Union representative have notified and received the approval of the designated supervisor who has determined that such absence is reasonable and would not be detrimental to the work programs of the Employer.
Data Processing Agreement The Data Processing Agreement, including the Approved Data Transfer Mechanisms (as defined in the Data Processing Agreement) that apply to your use of the Services and transfer of Personal Data, is incorporated into this Agreement by this reference. Each party will comply with the terms of the Data Processing Agreement and will train its employees on DP Law.
Processing of Customer Personal Data 3.1 UKG will: 3.1.1 comply with all applicable Data Protection Laws in the Processing of Customer Personal Data; and 3.1.2 not Process Customer Personal Data other than for the purpose, and in accordance with, the relevant Customer’s instructions as documented in the Agreement and this DPA, unless Processing is required by the Data Protection Laws to which the relevant UKG Processor is subject, in which case UKG to the extent permitted by the Data Protection Laws, will inform Customer of that legal requirement before the Processing of that Customer Personal Data. 3.2 Customer hereby: 3.2.1 instructs UKG (and authorizes UKG to instruct each Subprocessor) to: (a) Process Customer Personal Data; and (b) in particular, transfer Customer Personal Data to any country or territory subject to the provisions of this DPA, in each case as reasonably necessary for the provision of the Services and consistent with the Agreement. 3.2.2 warrants and represents that it is and will at all relevant times remain duly and effectively authorized to give the instructions set out in Section 3.2.1 on behalf of each relevant Customer Affiliate; and 3.2.3 warrants and represents that it has all necessary rights in relation to the Customer Personal Data and/or has collected all necessary consents from Data Subjects to Process Customer Personal Data to the extent required by Applicable Law. 3.3 Schedule 1 to this DPA sets out certain information regarding UKG’s Processing of Customer Personal Data as required by Article 28(3) of the GDPR (and equivalent requirements of other Data Protection Laws).
Submittal and Processing of Payments A. Contractor shall submit Applications for Payment in accordance with Article 15 of the General Conditions. Applications for Payment will be processed by Engineer as provided in the General Conditions.
Processing of Personal Data 1.1. With regard to the Processing of Personal Data, You are the controller and determine the purposes and means of Processing of Personal Data You provide to Us (“Controller”) and You appoint Us as a processor (“Processor”) to process such Personal Data (hereinafter, “Data”) on Your behalf (hereinafter, “Processing”). 1.2. The details of the type and purpose of Processing are defined in the Exhibits attached hereto. Except where the DPA stipulates obligations beyond the Term of the Agreement, the duration of this DPA shall be the same as the Agreement Term. 1.3. You shall be solely responsible for compliance with Your obligations under the applicable Data Protection Laws, including, but not limited to, the lawful disclosure and transfer of Personal Data to Us by upload of source data into the Cloud Service or otherwise. 1.4. Processing shall include all activities detailed in this Agreement and the instructions issued by You. You may, in writing, modify, amend, or replace such instructions by issuing such further instructions to the point of contact designated by Us. Instructions not foreseen in or covered by the Agreement shall be treated as requests for changes. You shall, without undue delay, confirm in writing any instruction issued orally. Where We believe that an instruction would be in breach of applicable law, We shall notify You of such belief without undue delay. We shall be entitled to suspend performance on such instruction until You confirm or modify such instruction. 1.5. We shall ensure that all personnel involved in Processing of Customer Data and other such persons as may be involved in Processing shall only do so within the scope of the instructions. We shall ensure that any person Processing Customer Data is subject to confidentiality obligations similar to the confidentiality terms of the Agreement. All such confidentiality obligations shall survive the termination or expiration of such Processing.
Processing of Deposit files The use of compression is recommended in order to reduce electronic data transfer times, and storage capacity requirements. Data encryption will be used to ensure the privacy of registry escrow data. Files processed for compression and encryption will be in the binary OpenPGP format as per OpenPGP Message Format -‐ RFC 4880, see Part A, Section 9, reference 3 of this Specification. Acceptable algorithms for Public-‐key cryptography, Symmetric-‐key cryptography, Hash and Compression are those enumerated in XXX 0000, not marked as deprecated in OpenPGP IANA Registry, see Part A, Section 9, reference 4 of this Specification, that are also royalty-‐free. The process to follow for the data file in original text format is: (1) The XML file of the deposit as described in Part A, Section 9, reference 1 of this Specification must be named as the containing file as specified in Section 5 but with the extension xml. (2) The data file(s) are aggregated in a tarball file named the same as (1) but with extension tar. (3) A compressed and encrypted OpenPGP Message is created using the tarball file as sole input. The suggested algorithm for compression is ZIP as per XXX 0000. The compressed data will be encrypted using the escrow agent’s public key. The suggested algorithms for Public-‐key encryption are Elgamal and RSA as per XXX 0000. The suggested algorithms for Symmetric-‐key encryption are TripleDES, AES128 and CAST5 as per XXX 0000. (4) The file may be split as necessary if, once compressed and encrypted, it is larger than the file size limit agreed with the escrow agent. Every part of a split file, or the whole file if not split, will be called a processed file in this section. (5) A digital signature file will be generated for every processed file using the Registry Operator’s private key. The digital signature file will be in binary OpenPGP format as per RFC 4880 Section 9, reference 3, and will not be compressed or encrypted. The suggested algorithms for Digital signatures are DSA and RSA as per XXX 0000. The suggested algorithm for Hashes in Digital signatures is SHA256. (6) The processed files and digital signature files will then be transferred to the Escrow Agent through secure electronic mechanisms, such as, SFTP, SCP, HTTPS file upload, etc. as agreed between the Escrow Agent and the Registry Operator. Non-‐electronic delivery through a physical medium such as CD-‐ROMs, DVD-‐ROMs, or USB storage devices may be used if authorized by ICANN. (7) The Escrow Agent will then validate every (processed) transferred data file using the procedure described in Part A, Section 8 of this Specification.
REMOTE ACCESS SERVICES ADDENDUM The Custodian and each Fund agree to be bound by the terms of the Remote Access Services Addendum hereto.
Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant. (a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III. (b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III. (c) Each application for a license under this Agreement shall include, at a minimum, the following information: (1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities; (2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route; (3) for poles, the proposed points of attachment; (4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building; (5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and (6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement. (d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information: (1) the number and types of cables, including the physical size (diameter) and weight (weight per foot); (2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and (3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system. (e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution. (f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route. (g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities. (h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.
Notice of Separation When an employee’s resignation is presumed in accordance with Section 27.2 above, the Employer will separate the employee by sending a separation notice to the employee by certified mail to the last known address of the employee. Such notice will include information regarding eligibility for continuation of medical benefits.
Agreement Not a Contract for Services Neither the Plan, the granting of the Restricted Shares, this Restricted Share Agreement nor any other action taken pursuant to the Plan shall constitute or be evidence of any agreement or understanding, express or implied, that the Participant has a right to continue to provide services as an officer, director, employee, consultant or advisor of the Company or any Subsidiary or Affiliate for any period of time or at any specific rate of compensation.
