PRODUCT WITHDRAWALS Sample Clauses

PRODUCT WITHDRAWALS. 17.1 NEI will notify EMC in writing at least [**] days prior to Product(s) withdrawal. During the withdrawal notice period, EMC may issue purchase orders with normal lead-time up until the last time buy. NEI will extend EMC a [**] month delivery window for the last time buy quantity. Any last time buy purchase order shall be placed by EMC shall be non-cancellable. The [**] month window commences upon termination of the [**] day withdrawal notice period. If the EOL is initiated by EMC, EMC will provide NEI an EOL plan and will issue non-cancellable purchase orders within 3 months of the notice for the quantities and delivery dates required by EMC. NEI shall notify EMC as soon as practically possible if it receives a notice from a supplier that the supplier is withdrawing a component for the Products, for which there is no commercially reasonable substitute. If, as a result of such component EOL, NEI must withdraw a Product hereunder, and if NEI is required to make a last-time purchase of such components in order to comply with its obligations under this Section 17, EMC shall bear the expense of the component purchase as it is incurred by NEI, with the cost of such expense being credited, in a manner approved by EMC on a case by case basis, toward the purchase price of the resultant Products. 17.2 NEI shall provide Product repair service for the Product(s) to EMC at a reasonable price and lead time, until the end of [**] years after Product(s) withdrawal, pursuant to terms and conditions set forth in Exhibit G, Product Repair. The foregoing notwithstanding, EMC shall have no obligation to order any Product repair service from NEI.
Sample 1
AutoNDA by SimpleDocs
PRODUCT WITHDRAWALS. Wyntek shall promptly notify BioStar of and shall provide BioStar with copies of any correspondence and other documentation received or prepared by Wyntek in connection with any of the following events: (A) receipt of a regulatory letter from the FDA in connection with Wyntek's manufacture, or a third party's manufacture, of any Product; (B) the recall of any Product; (C) the withdrawal of any Product from the market; (D) any regulatory comments or inquiry from a government entity requiring a response or action by Wyntek or a third party manufacturer with respect to any Product; or (E) receipt of repetitive complaints about a Product which relate to the clinical efficacy of such Product.
Sample 1
PRODUCT WITHDRAWALS. In the event that any regulatory agency in the Territory threatens or initiates any action to remove a Target Product from the market, Roche shall promptly notify Stressgen in writing of receipt of such notice by Roche.
Sample 1
PRODUCT WITHDRAWALS. BioStar shall promptly notify MDI of and shall provide MDI with copies of any correspondence and other documentation received or prepared by BioStar in connection with any of the following events: (a) receipt of a regulatory letter from the FDA in connection with BioStar's manufacture, or a third party's manufacture, of any Product; (b) the recall of any Product; (c) the withdrawal of any Product from the market; (d) any regulatory' comments or inquiry from a government entity requiring a response or action by BioStar or a third party manufacturer with respect to any Product; or (e) receipt of customer complaints about a Product which relate to the clinical efficacy of such Product.
Sample 1
PRODUCT WITHDRAWALS. 15.1 A SUPPLIER will notify EMC in writing at least [*]days prior to Product withdrawal. During the withdrawal notice period, EMC may [*]with normal [*]up until the [*]. Last-time-buy purchase orders must be non-cancelable of any Product requested to be delivered in the [*]days of the [*]. Product withdrawal shall not affect SUPPLIER's obligation to fill purchase orders previously issued hereunder. 15.2 A. SUPPLIER shall provide Product [*]for the [*]to EMC at a reasonable [*] and [*]until the end of [*]years after Product [*], pursuant to terms and conditions set forth in Exhibit [*], Product [*]. The foregoing notwithstanding, EMC shall have [*]to order any Product [*]from SUPPLIER.
Sample 1
PRODUCT WITHDRAWALS. In addition to the specific provisions of the Quality Agreement, Client shall have the sole discretion to withdraw or recall any Product, and shall be responsible for directing all administrative and regulatory actions relating thereto. In the event that Client withdraws or removes any Product manufactured and supplied by Patheon, Patheon shall cooperate with Client as reasonably requested in connection with any such withdrawal or removal, including to comply with all applicable laws and regulations. If the withdrawal or recall arises primarily from acts of omissions of Patheon in the manufacture, testing, storage, handling and/or shipping of Product, the withdrawal or recall costs shall be borne by Patheon. If Client and Patheon cannot agree on the cause or party responsible for such withdrawal or recall, then parties shall agree to refer the dispute to an independent laboratory or expert, whose determination shall be binding on the parties.
Sample 1
PRODUCT WITHDRAWALS. 15.1 SUPPLIER will notify EMC in writing at least [*] days prior to Product withdrawal. During the withdrawal notice period, EMC may issue purchase orders with normal lead-time up until the last time buy. Last-time-buy purchase orders must be non-cancelable for any Product requested to be delivered in the last [*] days of the notice period. Product withdrawal shall not affect SUPPLIER's obligation to fill purchase orders previously issued hereunder. 15.2 SUPPLIER shall provide Product repair service for the Product to EMC at a reasonable price and lead time, until the end of [*] years after Product withdrawal, pursuant to terms and conditions set forth in Exhibit H, Product Repair. The foregoing notwithstanding, EMC shall have no obligation to order any Product repair service from SUPPLIER. * Certain information on this page has been omitted and filed separately with the Commission. Confidential treatment has been requested with respect to the omitted portions.
Sample 1
AutoNDA by SimpleDocs

Related to PRODUCT WITHDRAWALS

  • Withdrawals All sums paid to the Credit Union on deposits (less set-offs allowed by law and/or provided by contract) shall be paid on proper withdrawal demand made by the named Fiduciary. The Credit Union has no obligation to monitor the further distribution of any funds withdrawn from the account, unless required to do so by court order. We reserve the right to deny any withdrawal request. The Credit Union shall not be liable for the misappropriation of funds resulting from a withdrawal from a Fiduciary Account.

  • Recalls Contractor shall immediately notify OGS of any recalls pertaining to any items awarded to the Contractor. The Federal ADA Act, signed into law July 26, 1990, bars employment discrimination and requires all levels of Government to provide necessary and reasonable accommodations to qualified workers with disabilities. Contractors are required to identify and offer any software or hardware products they manufacture or adapt which may be used or adapted for use by visually, hearing, or any other physically impaired individuals. Although it is not mandatory for Contractors to have this equipment in order to receive an award, it is necessary to identify any such equipment they have which falls into the above category. Pursuant to §19-0323 of the N.Y. Environmental Conservation Law (“the Law”) it is a requirement that heavy duty diesel vehicles in excess of 8,500 pounds use the best available retrofit technology (“BART”) and ultra low sulfur diesel fuel (“ULSD”). The requirement of the Law applies to all vehicles owned, operated by or on behalf of, or leased by State agencies and State or regional public authorities. It also requires that such vehicles owned, operated by or on behalf of, or leased by State agencies and State or regional public authorities with more than half of its governing body appointed by the Governor utilize BART. The Law may be applicable to vehicles used by Contractors “on behalf of” State agencies and public authorities and require certain reports from Contractors. All heavy duty diesel vehicles must have BART by the deadline provided in the Law. The Law also provides a list of exempted vehicles. Regulations set forth in 6 NYCRR Parts 248 and 249 provide further guidance. The Bidder hereby certifies and warrants that all heavy duty vehicles, as defined in the Law, to be used under this contract, will comply with the specifications and provisions of the Law, and 6 NYCRR Parts 248 and 249. An Authorized User should notify OGS Customer Services promptly if the Contractor fails to meet the requirements of this Contract. Performance which does not comply with requirements or is otherwise unsatisfactory to the Authorized User should also be reported to Customer Services: Customer Services Coordination E-mail: xxxxxxxx.xxxxxxxx@xxx.xx.xxx Telephone: (000) 000-0000 Contractor agrees that it will not sell or distribute fever thermometers containing mercury or any products containing elemental mercury for any purpose under this Contract.

  • Product Recalls (a) If either Party reasonably decides or is required by any government authority or court of competent jurisdiction, to initiate a product recall, withdrawal or field correction with respect to, or if there is any governmental seizure of, the Product, the Party initiating or required to initiate such action will notify the other Party promptly of the details regarding such action, including providing copies of all relevant documentation concerning such action. The Parties will assist each other in investigating any such situation and all regulatory contacts that are made and all activities concerning seizure, recall, withdrawal or field correction will be jointly coordinated by HSL and LMI. (b) If any such recall, withdrawal, field correction or seizure occurs due solely to (i) failure of any Product produced by HSL hereunder to conform to Specifications (including, without limitation, being adulterated or misbranded) or any warranty or other requirement set forth in this Agreement, (ii) the failure of HSL to comply in all material respects with any applicable law, rule, regulation, guideline, standard, court order or decree or (iii) the negligent or intentional wrongful act or omission of HSL in connection with the production of Product hereunder, then HSL shall bear the **** of any such seizure, recall, withdrawal or field correction and shall reimburse LMI for its ****, including any purchase price payments made to HSL and related taxes to the extent related to such recalled Product. To the extent any such recall, withdrawal, field correction or seizure occurs for any reason other than that set forth in the immediately preceding sentence, then LMI shall bear the **** of any such seizure, recall, withdrawal or field correction. If both HSL and LMI contribute to the cause of a seizure, recall, withdrawal or field correction, the cost and expense thereof will be shared in proportion to each Party’s contribution to the problem. For the purposes of this Agreement, the expenses of any recall, withdrawal, field correction or seizure shall include, without limitation, the out-of-pocket expenses of notification and destruction or return of the recalled Product and all other out-of-pocket costs incurred in connection with such recall but shall not include a Party’s lost profits. HSL’s reimbursement for the costs of LMI Materials related to such recall, withdrawal or field correction is limited by Section 5.6(c).

  • Partial Withdrawals At any time any Holder shall be entitled to request a withdrawal of such portion of the Interest held by such Holder as such Holder shall request.

  • Grievance Withdrawal A grievance may be withdrawn at any level without establishing precedent.

  • Permissible Withdrawals The Servicer may make withdrawals from each related Custodial P&I Account solely for the following: (a) remittances to the related Certificate Account; (b) reimbursement to itself for advances which have been recovered by subsequent collections including late payments, Liquidation Proceeds or Insurance Proceeds, to the extent funds on deposit recovered by such subsequent collections relate to the Mortgage Loans as to which such advances were made; (c) interest earnings on deposits to the related Custodial P&I Account, but only to the extent that such interest has been credited; (d) removal of amounts deposited in error; (e) removal of charges or other such amounts deposited on a temporary basis in the account; (f) removal of Servicing Fees to the extent deposited therein; and (g) termination of the account.

  • Hardship Withdrawals Hardship withdrawals, as provided for in paragraph 6.9 of the Basic Plan Document #04, [X] are [ ] are not permitted.

  • Product Changes Vocera shall have the right, in its absolute discretion, without liability to End User, to update to provide new functionality or otherwise change the design of any Product or to discontinue the manufacture or sale of any Product. Vocera shall notify End User at least 90 days prior to the delivery of any Product which incorporates a change that adversely affects form, fit or function (“Material Change”). Vocera shall also notify End User at least 90 days prior to the discontinuance of manufacture of any Product. Notification will be made as soon as reasonably practical for changes associated with regulatory or health and safety issues.

  • Deposits and Withdrawals 22.1 The Client may deposit funds into the Client Account at any time during the course of this Agreement. Deposits will be made via the methods and in the currencies accepted by the Company as amended from time to time. The detailed information about deposit options is shown on the Website. 22.2 The Company shall have the right to request the Client at any time any documentation to confirm the source of funds deposited into the Client Account. The Company shall have the right to reject a deposit of the Client if the Company is not duly satisfied as to the legality of the source of funds. 22.3 If the Client makes a deposit, the Company shall credit the relevant Client Account with the relevant amount actually received by the Company within one Business Day following the amount is cleared in the bank account of the Company. 22.4 If the funds sent by the Client are not deposited in the Client Account when they were supposed to, the Client shall notify the Company and request from the Company to make a banking investigation of the transfer. The Client agrees that any charges of the investigation shall be paid by the Client and deducted from his Client Account or paid directly to the bank performing the investigation. The Client understands and aggress that in order to perform the investigation the Client shall have to provide the Company with the requested documents and certificates. 22.5 The Company shall effect withdrawals of Client funds upon the Company receiving a relevant request from the Client. The withdrawal method accepted by the Company shall be the same used for the Client deposit, unless this is not possible due to technical or other applicable legal or regulatory reasons. 22.6 Upon the Company receiving an instruction from the Client to withdraw funds from the Client Account, the Company shall pay the said amount within five (5) Business Days, if the following requirements are met: (a) the withdrawal instruction includes all required information; (b) the instruction is to make a transfer to the originating account (whether that is a bank account, a payment system account etc.) from which the money was originally deposited in the Client Account or at the Client’s request to a bank account belonging to the Client; (c) the account where the transfer is to be made belongs to the Client; (d) at the moment of payment, the Client’s Balance exceeds the amount specified in the withdrawal instruction including all payment charges; (e) there is no Force Majeure event which prohibiting the Company from effecting the withdrawal. 22.7 It is agreed and understood that the Company will not accept third party or anonymous payments in the Client Account and will not allow to make withdrawals to any other third party or anonymous account. 22.8 The Company reserves the right to reasonably decline a withdrawal request of the Client asking for a specific transfer method and the Company has the right to suggest an alternative. 22.9 All payment and transfer charges of third parties will be borne by the Client and the Company shall debit the relevant Client Account for these charges. 22.10 Withdrawal fees may apply. The applicable fees may be found on the Company’s Website. 22.11 The Client may send the request for internal transfer of funds to another Client Account held by him with the Company. Internal transfers shall be subject to the Company’s policy from time to time. 22.12 Mistakes made by the Company during transfer of funds shall be refunded to the Client. It is understood that should the Client provide wrong instructions for a transfer, the Company may be unable to correct the mistake and the Client may have to bear the loss.

  • Initiation of TIPS Sales When a public entity initiates a purchase with Vendor, if the Member inquires verbally or in writing whether Vendor holds a TIPS Contract, it is the duty of the Vendor to verify whether the Member is seeking a TIPS purchase. Once verified, Vendor must include the TIPS Contract Number on all purchase communications and sales documents exchanged with the TIPS Member.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!