REMOVAL OF EXISTING WORK. Hack up/off and remove ceramic tiles including removing mortar bed or adhesive from concrete or brickwork and preparing surface for new Breaking up 100mm thick reinforced concrete thick m3 1 Breakdown 110mm brickwall m2 1 Ditto but to 220mm brickwall m2 1 Hack-up plaster work m2 1 Tiles to floors m2 1 Taking out and removing piping, sanitary fittings, etc including disconnecting piping from fittings and making good floor and wall finishes Remove wash hand basins plugged to wall No 1 Remove toilet seat fixed to floor complete including cistern No 1 Steel urinal approximately 1000 x 1000mm high, Complete No 1 Gypsum plasterboard ceilings including cornices, timber brandering,etc m2 1 Take out and remove doors, windows, etc including thresholds. xxxxx, etc and prepare to receive new doors, frames, windows, etc. (all elswhere measured Timber single door, Door lockset including, handles, etc No 1 Panes exceeding 0,1m2 and not exceeding 0,5m2 (new glazing elsewhere measured) Item 1 Wash down existing face bricks wall with approved soap/acid and pressure hose Item 1 Class 2 Copper pipes 15mm pipe and fixing to walls etc including any necessary holderbats fixings etc m 1 28mm Ditto m 1 15mm Pipe chased into brickwork m 1 22mm Ditto m 1 28mm Ditto m 1 Extra Over copper pipes for brass compression fittings 15mm fittings No 1 22mm Ditto No 1 28mm Ditto No 1 50mm diameter uPVC pipes with solvent welded straight joints including all excavations not exceeding 1m deep m 1 Ditto but 110mm m 1 Extra Over uPVC pipes for 50mm straightb reducer solvent welded fittings No 1 Ditto but 50mm plain bend No 1 Ditto but 110mm plain bend No 1 Ditto 50mm access bend No 1 Ditto 50mm plain junction No 1 Ditto 110mm plain junction No 1 Ditto but 50mm access junction No 1
REMOVAL OF EXISTING WORK. Breaking up and removing unreinforced concrete Taking down and removing roofs, gutters, etc. Taking down and removing ceilings, partitions, etc
REMOVAL OF EXISTING WORK. Taking down and removing roofs, floors, panelling, ceilings, partitions, etc completely 1 Fascia boards and fixings 2 Barge boards and fixings 3 Rainwater gutters and fixings 4 Rainwater downpipes and fixings m 10
REMOVAL OF EXISTING WORK. NATURE OF WORK: Tenderers are advised to visit the site and to satisfy themselves as to the nature and extent of the work to be done and provide in their tenders any items not specifically mentioned which they may deem necessary for the proper completion of the work. DIMENSIONS The Contractor is advised to take all dimensions affecting the existing buildings on the site, Section No. 2 Buildings Bill No. 1 ALTERATIONS
REMOVAL OF EXISTING WORK. Taking down and removing roofs, floors, panelling, ceilings, partitions, etc 1 Gypsum plasterboard ceilings including cornices, timber brandering, etc. in patches m2 5 2 Carefully take out and remove worn out and damaged roofing drive screws or hook bolts and replace with new heavy duty, hot dipped galvanised fixings with self sealing polypropylene washers and seals (approximately 7 no. fixings per square meter on roofing) m2 90 Section No. 2 Bill No. 1 Alterations 3 Walls in patches m2 22 4 10 x 30 x 0.5mm 'Menlath' mesh strips 205mm wide fixed by shot pinning or nail fixing to masonry walls over cracks exceeding 0.5mm but exceeding 2mm extending 100mm to either side of crack to both faces of the masonry wall m 21 Carried Forward to Summary of Section No. 2 Section No. 2 Bill No. 1 Alterations R CEILINGS, PARTITIONS AND ACCESS FLOORING The descriptions given in the various items below are not necessarily full and complete and reference must be made to the "Model Preambles To All Trades 2008", "Supplementary Preambles" and "Supplementary Specifications" to this contract for the full requirements of each scheduled item Openings in ceilings for light fittings etc. are to include for additional suspension as required Unless otherwise decribed ceilings shall be deemed to be horizontal Items described as "nailed" shall be deemed to be fixed with hardened steel nails or shot pinned to blockwork or concrete. Items described as "plugged" shall be deemed to include screwing to fibre, plastic or metal plugs at not exceeding 500mm centres, and where described as "bolted", the bolts have been given elsewhere
REMOVAL OF EXISTING WORK. Breaking up and removing unreinforced concrete including carting away 2 Staircases, edges of slabs, walkways etc. m³ 3 75mm Thick surface beds m²
REMOVAL OF EXISTING WORK. Taking down and removing roofs, floors, panelling, ceilings, partitions, etc 1 Gypsum plasterboard ceilings, including timber brandering, cornices, etc m2 16 2 Fascias and barge boards m 18 Taking out and removing sundry joinery work, fittings, etc, 3 Gypsum coved cornices
REMOVAL OF EXISTING WORK. Breaking up and removing reinforced concrete, including cutting off and removing reinforcement 1 Stairs and landings m3 8 Taking out and removing sundry joinery work, fittings, etc, 2 Gypsum coved cornices m 78 Taking down and removing roofs, floors, panelling, ceilings, partitions, etc 3 Gypsum plasterboard ceilings, including timber brandering, cornices, etc m2 186 4 New screed on floors m2 174 BILL NO 2: CEILINGS, PARTITIONS AND ACCESS FLOORING NOTE : Tenderers are advised to study the "Specification of Materials and Methods to be used" (OOG-001E) before pricing this bill 5 Cellulose ceiling insulation laid loose over ceiling in roof void m2 186.00 6mm "Cladit" fibre-cement ceilings boards or similar approved (Architect to advise) 6 Ceilings including H-type pressed steel jointing strips and 38 x 38mm sawn softwood brandering at 400mm centres in one direction and around edges where required for fixing cornices, securely spiked to roof timbers m2 186.00
REMOVAL OF EXISTING WORK. Taking out and removing sundry joinery work, fittings, etc, 1 Timber skirtings
REMOVAL OF EXISTING WORK. Taking down and removing roofs, floors, panelling, ceilings, partitions, etc 1 Gypsum plasterboard ceilings, including timber brandering, cornices, etc m2 369 Taking out and removing sundry joinery work, fittings, etc, 2 Gypsum coved cornices m 233 m2 60 Hacking up/off and removing granolithic, screeds, plaster, etc from concrete or brickwork and preparing surfaces for new screed, plaster, tile finishes, etc 4 Internal plaster from walls and columns m2 396 Breaking up and removing reinforced concrete, including cutting off and removing reinforcement 5 Concrete apron slab m3 11 6 New screed on floors m2 282
