Repair and Replacement Parts/Services - Continuing Availability Sample Clauses

Repair and Replacement Parts/Services - Continuing Availability. Supplier agrees to offer for sale to Company, during the term of this Agreement and until [CONFIDENTIAL TREATMENT REQUESTED] /*/ after the expiration of this Agreement, functionally equivalent maintenance, replacement, and repair parts (“Parts”) for the Hardware covered by this Agreement at the price set forth in Supplier’s then current agreement with Company for said Parts or, if no such agreement exists, at Supplier’s current list price, or at a price mutually agreed upon by Company and Supplier. These Parts shall be warranted as set forth in the Hardware WARRANTY clause. In the event Supplier fails to supply such Parts or Supplier is unable to obtain another source of supply for Company, then such failure or inability shall be considered noncompliance with this clause and Supplier shall, without obligation of or charge to Company, provide Company, with only, that technical information or any other rights required so that Company can manufacture, have manufactured, or obtain such Parts from other sources. Such technical information shall be licensed to Company by Supplier for use of the technical information only to the extent necessary to manufacture, have manufactured, or obtain such Parts from other sources, as set out in this Article 7.4. The technical information includes, by example, and not by way of limitation: (a) manufacturing drawings and specifications of raw materials and components comprising such Parts, (b) manufacturing drawings and specifications covering special tooling and the operation thereof, (c) a detailed list of all commercially available Parts and components purchased by Supplier on the open market disclosing the Part number, name and location of the supplier and price lists for the purchase thereof, and (d) one complete copy of the source code used in the preparation of any software licensed or otherwise acquired by Company from Supplier under this Agreement. Parts may also include but are not limited to Field Replaceable Units (FRUs), which includes Line Cards, Server Modules, Bay Controllers, Cooling Modules and Breaker Interface Panels. The Bay is also considered a Part, although certain components may be replaceable on a case by case basis. This would cover components such as Backplanes, internal cabling and the TSR frame.
AutoNDA by SimpleDocs

Related to Repair and Replacement Parts/Services - Continuing Availability

  • Replacements and Replacement Reserve (a) Borrower shall cause Mortgage Borrower to comply with all of the terms and conditions set forth in Section 7.3 of the Mortgage Loan Agreement.

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations 7.1 Lessee's Obligations.

  • Maintenance Repairs and Alterations 6.01 Tenant's Obligations to Repair ------------------------------ Tenant shall at its sole cost and expense, maintain in clean and safe condition, and make all repairs and replacements to the Premises and every part thereof, structural and non-structural, so as to keep, maintain and preserve the Premises in first class condition and repair, including, without limitation, the roof, the foundation, the heating, ventilation and air conditioning system ("HVAC"), elevators, if any, all plumbing and sewage facilities, fire sprinklers, electrical and lighting facilities, systems, appliances, and equipment within the Premises, fixtures, interior and exterior walls, floors, ceilings, windows, doors, entrances, all interior and exterior glass (including plate glass), and skylights located within the Premises, and all sidewalks, service areas, parking areas and landscaping comprising part of the Premises. All repairs and replacements required to be made by Tenant shall be made promptly with new materials of like kind and quality to those used in the original construction of the Premises. If the repair or replacement work affects the structural parts of the Premises, or if the estimated cost of any item or repair or replacement exceeds $10,000, then Tenant shall first obtain Landlord's written approval of the scope of work, plans therefor, and materials to be used. Any such work shall be performed by Landlord's contractor or by such contractor as Tenant may choose from an approved list to be submitted by Landlord. Landlord shall have the right to make any repairs or replacements which are not promptly made by Tenant and charge Tenant, as Additional Rent, for the cost thereof together with interest thereon at the Agreed Rate from the date of payment thereof by Landlord. Without limiting any of Tenant's obligations hereunder, during the Lease Term Tenant, at its expense, shall obtain and keep in force an HVAC service contract and a roof maintenance program satisfactory to Landlord. Tenant hereby waives the benefit of any statute now or hereafter in effect which would otherwise afford Tenant the right to make repairs at Landlord's expense or to terminate this Lease because of Landlord's failure to keep the Premises in good condition, order and repair. Tenant specifically waives all rights it may have under Sections 1932(1), 1941 and 1942 of the California Civil Code, and any similar or successor statute or law. Notwithstanding anything to the contrary contained herein, Landlord shall exercise its rights under any guaranties or warranties relating to the original construction of the Premises if the need to make repairs arises due to a defect therein; provided, however, Landlord shall not have any liability or be required to expend any funds if such guaranties or warranties are not honored by the makers hereof.

  • Maintenance and Repair; Return (a) Lessee, at its sole cost and expense, shall maintain each Property in good condition, repair and working order (ordinary wear and tear excepted) and in the repair and condition as when originally delivered to Lessor and make all necessary repairs thereto and replacements thereof, of every kind and nature whatsoever, whether interior or exterior, ordinary or extraordinary, structural or nonstructural or foreseen or unforeseen, in each case as required by Section 9.1 and on a basis consistent with the operation and maintenance of properties or equipment comparable in type and function to the applicable Property, such that such Property is capable of being immediately utilized by a third party and in compliance with standard industry practice subject, however, to the provisions of Article XV with respect to Casualty and Condemnation.

  • Replacement Parts Replacement parts for goods purchased by Buyer hereunder are for the purpose of this Section defined as “Parts” and are included in the definition of “goods” under this Order. For all goods ordered by Buyer’s Measurement and Control Solutions. Industrial Solutions or Wind Energy businesses and if expressly required on the face of this Order by another Affiliate, group, division and/or business unit or Buyer, Seller shall provide Parts: (i) to Buyer’s Measurement and Control Solutions and Industrial Solutions businesses for a period of […***…]; and (ii) to Buyer’s Wind Energy business for a period of […***…]. Seller shall continue to supply such Parts past the […***…] or […***…] for so long as the Seller continues to produce goods for Buyer. After a good is no longer in production, the prices for Parts shall be […***…] of those amounts. No minimum order requirements shall apply unless the parties mutually agree in advance. After the end of the above referenced periods. Seller shall continue to maintain in good working condition all Seller-owned tooling required to produce the Parts, and shall not dispose of such tooling without first contacting Buyer and offering Buyer the right to purchase such tooling from Seller. Seller’s obligations with regard to Buyer owned tooling are set forth in Section 4, “Buyer’s Property”.

  • TENANT’S MAINTENANCE AND REPAIR Tenant at its sole expense shall comply with all applicable laws and governmental regulations governing the Premises and make all repairs necessary to keep the Premises in the condition as existed on the Commencement Date (or on any later date that the improvements may have been installed), excepting ordinary wear and tear, including without limitation the electrical and mechanical systems, any air conditioning, ventilating or heating equipment which serves the Premises, all walls, glass, windows, doors, door closures, hardware, fixtures, electrical, plumbing, fire extinguisher equipment and other equipment. Any damage or deterioration of the Premises shall not be deemed ordinary wear and tear if the same could have been prevented by good maintenance practices by Tenant. As part of its maintenance obligations hereunder, Tenant shall, at Landlord’s request, provide Landlord with copies of all maintenance schedules, reports and notices prepared by, for or on behalf of Tenant. Tenant shall obtain preventive maintenance contracts from a licensed heating and air conditioning contractor to provide for regular inspection and maintenance of the heating, ventilating and air conditioning systems servicing the Premises, all subject to Landlord’s approval. All repairs shall be at least equal in quality to the original work, shall be made only by a licensed contractor approved in writing in advance by Landlord (which approval shall not be unreasonably withheld), and shall be made only at the time or times approved by Landlord. Any contractor utilized by Tenant shall be subject to Landlord’s standard requirements for contractors, as modified from time to time. Landlord shall have the right at all times (upon at least 24 hours’ prior notice) to inspect Tenant’s maintenance of all equipment (including without limitation air conditioning, ventilating and heating equipment), and may impose reasonable restrictions and requirements with respect to repairs, as provided in Section 7.3, and the provisions of Section 7.4 shall apply to all repairs. Alternatively, Landlord may elect to make any repair or maintenance required hereunder on behalf of Tenant and at Tenant’s expense, and Tenant shall promptly reimburse Landlord for all costs incurred upon submission of an invoice. Notwithstanding anything to the contrary contained in this Section 7.1, in the event Tenant’s obligation for compliance with all applicable laws and governmental regulations, or making repairs, results in a capital improvement on Tenant’s part (or Tenant’s being obligated to reimburse Landlord for a capital improvement), Tenant shall only be responsible for the amortized cost of such capital improvement (amortized at a market cost of funds as reasonably determined by Landlord) over the useful life of such improvements during the Term (except in the event obligation for any such capital improvement is required due to Tenant’s particular use of the Premises, in which case Tenant shall be fully responsible for the entire cost and installation of such capital improvement).

  • Mitigation Obligations; Replacement of Lenders (a) If any Lender requests compensation under Section 2.15, or if the Borrower is required to pay any additional amount to any Lender or any Governmental Authority for the account of any Lender pursuant to Section 2.17, then such Lender shall use reasonable efforts to designate a different lending office for funding or booking its Loans hereunder or to assign its rights and obligations hereunder to another of its offices, branches or affiliates, if, in the judgment of such Lender, such designation or assignment (i) would eliminate or reduce amounts payable pursuant to Section 2.15 or 2.17, as the case may be, in the future and (ii) would not subject such Lender to any unreimbursed cost or expense and would not otherwise be disadvantageous to such Lender. The Borrower hereby agrees to pay all reasonable costs and expenses incurred by any Lender in connection with any such designation or assignment.

  • Maintenance and Repairs 7.1 Tenant shall, at its expense, throughout the Term and all renewals and extensions thereof, maintain in good order, condition and repair the Premises, including but not limited to heating and air conditioning equipment, walls, floors and ceilings, window exteriors, mechanical and electrical systems and equipment exclusively serving the Premises, electric light fixtures, bulbs, tubes and tube casings, doors, floor coverings, dock doors, levelers, plumbing system and plumbing fixtures, Tenant’s signs and utility facilities not maintained by Landlord. Landlord shall use reasonable efforts to extend to Tenant the benefit from warranties on such items, if any, that have been made by Landlord’s contractors or vendors and to extend to Tenant, as and if available, any bulk buying power that Landlord may have with such contractors or vendors. If any portion of the Premises or any system or equipment in the Premises which Tenant is obligated to repair cannot be fully repaired, Tenant shall promptly replace the same, regardless of whether the benefit of such replacement extends beyond the Term. Tenant shall, at Tenant’s expense, maintain a preventive maintenance contract providing for the regular inspection (at least quarterly) and maintenance of the heating and air conditioning system by a licensed and qualified heating and air conditioning contractor, or Tenant shall perform such HVAC inspection and maintenance with duly licensed and qualified employee. The cost of such preventive maintenance contract shall be paid by Tenant and an expense solely chargeable to Tenant; but if Landlord so elects, same may be billed directly by Landlord to Tenant where Landlord on Tenant’s behalf enters into such preventive maintenance contract and in such case shall be deemed Additional Rent (Landlord alone may so elect whether to enter into such preventive maintenance contract on Tenant’s behalf). Landlord shall have the right, upon notice to Tenant, to undertake the responsibility for preventive maintenance of any other system or component at Tenant’s expense. Tenant shall be responsible for janitorial services and trash removal from the Premises, at Tenant’s expense. Landlord and Tenant intend that, at all times during the Term, Tenant shall maintain the Premises in good order and condition and appearances reasonably commensurate with the balance of the Property. All of Tenant’s obligations to maintain and repair shall be accomplished at Tenant’s sole expense. If Tenant fails to maintain and repair the Premises as required by this Section, Landlord may, on 10 days’ prior written notice (except that no notice shall be required in case of emergency), enter the Premises and perform such maintenance or repair on behalf of Tenant; provided such entry is made in compliance with Applicable Laws, including but not limited to, the Marijuana code. In such cases, Tenant shall reimburse Landlord immediately upon demand for all costs incurred in performing such maintenance or repair plus an administration fee equal to 5% of such actual and reasonable costs or expenses.

  • LESSOR'S ACCESS; SHOWING PREMISES; REPAIRS Lessor and Lessor's agents shall have the right to enter the Premises at any time, in the case of an emergency, and otherwise at reasonable times for the purpose of showing the same to prospective purchasers, lenders, or lessees, and making such alterations, repairs, improvements or additions to the Premises or to the Building, as Lessor may reasonably deem necessary. Lessor may at any time place on or about the Premises or Building any ordinary "For Sale" signs and Lessor may at any time during the last one hundred eighty (180) days of the term hereof place on or about the Premises any ordinary "For Lease" signs. All such activities of Lessor shall be without abatement of rent or liability to Lessee.

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.

Time is Money Join Law Insider Premium to draft better contracts faster.