Responsibilities of the ENGINEER Sample Clauses

Responsibilities of the ENGINEER. ‌ (a) The ENGINEER shall be responsible for the professional quality, technical accuracy, timely completion, and the coordination of all design drawings, specifications, reports, and other services furnished by the ENGINEER under this Agreement. The ENGINEER shall keep the OWNER informed of the performance of the ENGINEER’S duties under this Agreement. The ENGINEER, shall promptly and without additional compensation, correct or revise any errors, omissions, or other deficiencies in the design drawings, specifications, reports, and other services. (b) The ENGINEER shall perform services (1) with professional skill and care ordinarily provided by competent engineers or architects practicing under the same or similar circumstances and professional license, and (2) as expeditiously as is prudent considering the ordinary professional skill and care of a competent engineer or architect. ENGINEER shall comply with all applicable state, federal and local laws, ordinances, rules, and regulations relating to the work to be performed and Engineer's performance. Additionally, ENGINEER shall follow any applicable requirements provided by OWNER in effect on the date of execution of any agreement OWNER may have executed with any state agency which has participated in funding this project. (c) The OWNER’S review or approval of design drawings, specifications, reports, and other services furnished hereunder shall not in any way relieve the ENGINEER of responsibility for the technical adequacy of the work. Neither the OWNER’S or any local, or state agency review, approval or acceptance of, nor payment for any of the services shall be construed as a waiver of any rights under this Agreement or of any cause of action arising out of the performance of this Agreement. (d) The ENGINEER shall be and shall remain liable, in accordance with applicable law, for all damages to the OWNER caused by the ENGINEER’S negligent performance of any of the services furnished under this Agreement, except for errors, omissions or other deficiencies to the extent attributable to the OWNER or OWNER-furnished data. The ENGINEER shall not be responsible for any time delays in the Project caused by circumstances beyond the ENGINEER’S control. (e) The ENGINEER’S obligations under this Section 2 are in addition to the ENGINEER’S other express or implied assurances under this Agreement or State law and in no way diminish any other rights that the OWNER may have against the ENGINEER for faulty materials,...
AutoNDA by SimpleDocs

Related to Responsibilities of the ENGINEER

  • RESPONSIBILITIES OF THE OWNER The Owner agrees to: Provide all documentation, records, and disclosures as required by law or required by the Agent to manage and operate the Property, and immediately notify the Agent if the Owner becomes aware of any change in such documentation, records or disclosures, or any matter affecting the habitability of the Property; Indemnify, defend, and hold harmless the Agent, and all persons in the Agent's firm, regardless of responsibility, from all costs, expenses suits, liabilities, damages, attorneys fees, and claims of every type, including, but not limited to, those arising out of injury or death of any person, or damage to any real or personal property of any person, including the Owner, for: Any repairs performed by the Owner or by others hired directly by the Owner; or Those relating to the management, leasing, rental, security deposit, or operation of the Property by the Agent, or any person in the Agent's company, or the performance or exercise of any of the duties, powers, or authorities granted to the Agent; This sub-section, and all rights to the Agent’s indemnification, shall be considered void if the Agent exemplifies any willful acts of gross negligence; Maintain the Property in a condition fit for human habitation as required by applicable State and local laws; Pay all interest on Tenants’ security deposits if required by applicable laws; Carry and pay for: Public and premises liability insurance in an amount of no less than one-million dollars ($1,000,000.00); and Property damage and worker’s compensation insurance adequate to protect the interests of the Owner and the Agent. The Agent shall be, and the Owner authorizes Agent to be, named as an additional insured party on the Owner’s policies; and Pay any late charges, penalties and/or interest imposed by lenders or other parties for failure to make payment only if the failure is due to insufficient funds in the Agent’s trust account available for such payment. In addition, the Owner agrees to replace any funds required if there are insufficient funds in the Agent’s trust account to cover such responsibilities of the Owner.

  • Responsibilities of the Parties 1.5.1 The Parties shall perform all obligations of this Agreement in accordance with all Applicable Laws and Regulations, Operating Requirements, and

  • Responsibilities of the Contractor The Contractor shall provide all technical and professional expertise, knowledge, management, and other resources required for accomplishing all aspects of the tasks and associated activities identified in the Scope of Work. In the event that the need arises for the Contractor to perform services beyond those stated in the Scope of Work, the Contractor and the City shall negotiate mutually agreeable terms and compensation for completing the additional services.

  • RESPONSIBILITIES OF THE UNIVERSITY The UNIVERSITY shall designate in writing a faculty member to coordinate with a designee of the FIELDWORK SITE.

  • RESPONSIBILITIES OF THE STATE 3.2.1 The State will identify a Project Manager for the Project. The Project Manager will be the sole point of contact between the Contractor and the State. The Project Manager will be the State’s representative authorized to communicate the State’s position and directions related to all contract work and to coordinate all change orders with the Commissioner of Buildings and General Services as deemed necessary. 3.2.2 If applicable, the State shall furnish all surveys describing the physical characteristics, legal limitations and utility locations for the site of the Project, and a legal description of the site. 3.2.3 Except as provided in Subparagraph 4.7.1, the State shall secure and pay for necessary approvals, easements, assessments and charges required for the construction, use or occupancy of permanent structures or for permanent changes in existing facilities. 3.2.4 Information or services under the State's control shall be furnished by the State with reasonable promptness to avoid delay in the orderly progress of the Work. 3.2.5 Unless otherwise provided in the Contract Documents, the Contractor will be furnished, free of charge, all copies of Drawings and Specifications reasonably necessary for the execution of the Work. 3.2.6 The State shall forward instructions to the Contractor through the Architect. 3.2.7 The foregoing are in addition to any other duties and responsibilities of the State enumerated in the Contract Documents including those responsibilities described in Articles 6, 9 and 11 of this agreement. 3.2.8 The State may utilize a Clerk-of-the-Works to provide inspection and monitoring work on behalf of the State. If a Clerk-of-the-Works is utilized, it is the responsibility of the Architect and the Contractor to review and understand the Clerk’s duties, responsibilities and limitations of authority. Upon request, the State shall provide a copy of the Clerk-of-the-Works contract to Architect and Contractor.

  • RESPONSIBILITIES OF PARTIES A. BST will include billing number information associated with resold exchange lines or SPNP arrangements in its LIDB. The Local Exchange Company will request any toll billing exceptions via the Local Service Request (LSR) form used to order resold exchange lines, or the SPNP service request form used to order SPNP arrangements. B. Under normal operating conditions, BST shall include the billing number information in its LIDB upon completion of the service order establishing either the resold local exchange service or the SPNP arrangement, provided that BST shall not be held responsible for any delay or failure in performance to the extent such delay or failure is caused by circumstances or conditions beyond BST’s reasonable control. BST will store in its LIDB an unlimited volume of the working telephone numbers associated with either the resold local exchange lines or the SPNP arrangements. For resold local exchange lines or for SPNP arrangements, BST will issue line-based calling cards only in the name of Local Exchange Company. BST will not issue line- based calling cards in the name of Local Exchange Company’s individual end users. In the event that Local Exchange Company wants to include calling card numbers assigned by the Local Exchange Company in the BST LIDB, a separate agreement is required. C. BST will provide responses to on-line, call-by-call queries to the stored information for the specific purposes listed in the next paragraph. D. BST is authorized to use the billing number information to perform the following functions for authorized users on an on-line basis: 1. Validate a 14 digit Calling Card number where the first 10 digits are a line number or special billing number assigned by BST, and where the last four digits (PIN) are a security code assigned by BST. 2. Determine whether the Local Exchange Company has identified the billing number as one which should not be billed for collect or third number calls, or both.

  • Responsibilities of Contractor A. The Contractor shall perform all work on the described project as required by the Contract documents. The work to be performed includes the labor and services necessary to produce such replacement, and all materials, supplies, tools, transportation, equipment, and machinery required for replacement. B. This project bid includes all materials, labor and equipment to complete the reconstruction and resurfacing of streets as outlined in the Project Manual for WWREYN - XXXXXXXX SANITARY SEWER - PHASE 1 dated March 25th, 2021 as outlined in Attachment A.

  • Responsibilities of the Company 3.3.1 The Company shall provide participants of CopyTrade with a complete package of services according to the Customer Agreement. The Company is liable for proper performance of technological solutions according to the Customer Agreement. 3.3.2 The Company bears no liability to participants of CopyTrade for lost profit or losses, which may directly or indirectly occur as a result of trading operations performed or not performed by an Investor or a Trader. 3.3.3 The Company bears no liability to participants of CopyTrade for lost profit or losses, which may be directly or indirectly occur as a result of their ignorance of regulatory documents or cooperation scheme. 3.3.4 The Company doesn’t evaluate Traders’ professional skills and suitability not on a single stage of their activity and bears no responsibility to Investors for any losses or lost profit they may incur. 3.3.5 The Company is not liable for:

  • Responsibilities of the Borrower (a) Anything herein to the contrary notwithstanding, the Borrower shall: (i) perform all of its obligations, if any, under the Contracts related to the Pool Receivables to the same extent as if interests in such Pool Receivables had not been transferred hereunder, and the exercise by the Administrative Agent, or any other Credit Party of their respective rights hereunder shall not relieve the Borrower from such obligations and (ii) pay when due any taxes, including any sales taxes payable in connection with the Pool Receivables and their creation and satisfaction. None of the Credit Parties shall have any obligation or liability with respect to any Collateral, nor shall any of them be obligated to perform any of the obligations of the Borrower, the Servicer or any Originator thereunder. (b) Alliance hereby irrevocably agrees that if at any time it shall cease to be the Servicer hereunder, it shall act (if the then-current Servicer so requests) as the data-processing agent of the Servicer and, in such capacity, Alliance shall conduct the data-processing functions of the administration of the Receivables and the Collections thereon in substantially the same way that Alliance conducted such data-processing functions while it acted as the Servicer. In connection with any such processing functions, the Borrower shall pay to Alliance its reasonable out-of-pocket costs and expenses from the Borrower’s own funds (subject to the priority of payments set forth in Section 4.01).

  • Responsibilities of the Seller (a) Anything herein to the contrary notwithstanding, the Seller shall: (i) perform all of its obligations, if any, under the Contracts related to the Pool Receivables to the same extent as if interests in such Pool Receivables had not been transferred hereunder, and the exercise by the Administrator, the Purchaser Agents or the Purchasers of their respective rights hereunder shall not relieve the Seller from such obligations, and (ii) pay when due any taxes, including any sales taxes payable in connection with the Pool Receivables and their creation and satisfaction. The Administrator, the Purchaser Agents or any of the Purchasers shall not have any obligation or liability with respect to any Pool Asset, nor shall any of them be obligated to perform any of the obligations of the Seller, Servicer, WESCO or the Originators thereunder. (b) WESCO hereby irrevocably agrees that if at any time it shall cease to be the Servicer hereunder, it shall act (if the then-current Servicer so requests) as the data-processing agent of the Servicer and, in such capacity, WESCO shall conduct the data-processing functions of the administration of the Receivables and the Collections thereon in substantially the same way that WESCO conducted such data-processing functions while it acted as the Servicer.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!