Role of the Manufacturing Coordinator Sample Clauses

Role of the Manufacturing Coordinator. (a) The Manufacturing Coordinator shall: (i) be responsible for the day to day implementation of the Manufacturing Plan and administration of Manufacturing-related activities; (ii) provide advice to the JDT and JCT on provisions in the Development Plan and Commercialisation Plan, respectively, that relate to the supply of Antibody Products to the Parties; (iii) consult with the JCT and JDT, as applicable, and assist the JCT and JDT in identifying Manufacturing needs and requirements of Clinical Supplies (including placebo and comparators) and Commercial Supplies of Antibody Products; (iv) provide assistance to the JMT in connection with the development and implementation of an appropriate forecasting mechanism to provide any Manufacturer(s) with sufficient lead-time to Manufacture or have Manufactured the Parties’ requirements of Clinical Supplies (including placebo and comparators) and Commercial Supplies of Antibody Products; (v) based on the criteria set out in Article 7.2(c) and when and in the form requested by the JMT, provide the JMT with details of Third Parties capable of Manufacturing each Antibody Product and provide such additional assistance as the JMT may require in connection with verifying such capability and otherwise assessing proposals submitted by such Third Parties; (vi) at the JMT’s request and in accordance with the JMT’s instructions, negotiate on behalf of the Parties the terms of a draft Manufacturing Agreement with such Third Party to be submitted and reviewed by the JMT, provided that the Party that is not the Manufacturing Coordinator shall have the right to participate and have an equal voice in any such negotiation, and provided, further, that if the JMT selects the Manufacturing Coordinator to act as Manufacturer for any Antibody Product the other Party shall negotiate the terms of such Manufacturing Agreement with the Manufacturing Coordinator; (vii) use [***] [Confidential Treatment Required] to ensure that any draft Manufacturing Agreement submitted to the JMT for approval complies with Article 7.8 and draw to the JMT’s attention any aspect of any draft Manufacturing Agreement that does not comply with Article 7.8; (viii) supervise the performance of any Third Party Manufacturer and report any breaches of the Manufacturing Agreement to the JMT; (ix) provide any administrative assistance required by the JMT in connection with the performance of the Manufacturing Agreement, including compilation of forecasts and submission ...
Sample 1
AutoNDA by SimpleDocs

Related to Role of the Manufacturing Coordinator

  • Project Coordinator Within 14 days of the effective date of this Consent Agreement, DTSC and Respondent shall each designate a Project Coordinator and shall notify each other in writing of the Project Coordinator selected. Each Project Coordinator shall be responsible for overseeing the implementation of this Consent Agreement and for designating a person to act in his/her absence. All communications between Respondent and DTSC, and all documents, report approvals, and other correspondence concerning the activities performed pursuant to this Consent Agreement shall be directed through the Project Coordinators. Each party may change its Project Coordinator with at least seven days prior written notice.

  • Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Project Steering Committee 1. For a sound implementation and management of the project, a steering committee shall be set up in line with provisions of the programme manual. 2. The steering committee is the decision-making body of the project and it shall be composed by representatives of the LP and all PPs duly authorised to represent the respective LP and PP institutions. It shall be chaired by the LP and it shall meet on a regular basis. Associated partners shall be invited to take part in the steering committee in an advisory capacity. External key stakeholders may also be invited to take part to one or more meetings in an observer/advisory capacity. 3. The steering committee shall at least: a. be responsible for monitoring and validating the implementation of the project and the achievement of the planned results as in the approved application form; b. perform the financial monitoring of the project implementation and to decide on any budget modifications as in § 11 of this agreement; c. monitor and manage deviations of the project implementation; d. decide on project modifications (e.g. partnership, budget, activities, and duration) if needed; e. be responsible for the settlement of any disputes within the partnership (as stipulated in § 22 of this agreement). 4. Further aspects, including the creation of sub-groups or task forces, may be set out in the rules of procedure of the steering committee.

  • Commercialization Efforts The RECIPIENT shall, including whether through its own efforts or the efforts of a licensee under a License Agreement allowed by the terms of this Attachment, use diligent and commercially reasonable efforts to commercialize at least one Commercial Product or Commercial Service or otherwise bring to practical application the Project Results in accordance with the commercial development plan submitted with the Application and including any changes to such commercial development plan in accordance with Section D3.01. For the avoidance of doubt, partnering or licensing activities shall be considered to be efforts to commercialize.

  • Service Coordinators Each Party has designated an employee or title as the key contact for the day-to-day implementation or monitoring of each Service as specified in the applicable Transition Service Schedule (each, a “Service Coordinator”). The Parties shall direct communications relating to specific Services to the applicable Service Coordinators. The Service Coordinators shall report to the Transition Committee from time to time, as directed by the members of the Transition Committee designated by the applicable Party.

  • Project Coordination The Engineer shall coordinate all subconsultant activity to include quality and consistency of deliverables and administration of the invoices and monthly progress reports. The Engineer shall coordinate with necessary local entities.

  • Scheduling Coordinator Buyer shall act as the Scheduling Coordinator for the Project. In that regard, Buyer and Seller shall agree to the following:

  • Coordinator 6.4.1 The Coordinator shall be the intermediary between the Parties and the Funding Authority and shall perform all tasks assigned to it as described in the Grant Agreement and in this Consortium Agreement. 6.4.2 In particular, the Coordinator shall be responsible for: - monitoring compliance by the Parties with their obligations - keeping the address list of Members and other contact persons updated and available - collecting, reviewing and submitting information on the progress of the Project and reports and other deliverables (including financial statements and related certification) to the Funding Authority - preparing the meetings, proposing decisions and preparing the agenda of General Assembly meetings, chairing the meetings, preparing the minutes of the meetings and monitoring the implementation of decisions taken at meetings - transmitting promptly documents and information connected with the Project,, - administering the financial contribution of the Funding Authority and fulfilling the financial tasks described in Section 7.3 - providing, upon request, the Parties with official copies or originals of documents which are in the sole possession of the Coordinator when such copies or originals are necessary for the Parties to present claims. If one or more of the Parties is late in submission of any project deliverable, the Coordinator may nevertheless submit the other parties’ project deliverables and all other documents required by the Grant Agreement to the Funding Authority in time. 6.4.3 If the Coordinator fails in its coordination tasks, the General Assembly may propose to the Funding Authority to change the Coordinator. 6.4.4 The Coordinator shall not be entitled to act or to make legally binding declarations on behalf of any other Party or of the consortium, unless explicitly stated otherwise in the Grant Agreement or this Consortium Agreement. 6.4.5 The Coordinator shall not enlarge its role beyond the tasks specified in this Consortium Agreement and in the Grant Agreement. [Option: 6.5 Management Support Team (Optional, where foreseen in Grant Agreement or otherwise decided by the consortium) The Management Support Team shall be proposed by the Coordinator. It shall be appointed by the General Assembly and shall assist and facilitate the work of the General Assembly. The Management Support Team shall provide assistance to the Coordinator for executing the decisions of the General Assembly. It shall be responsible for the day-to-day management of the Project.] [Option: 6.6 External Expert Advisory Board (EEAB) (Optional, where foreseen in Grant Agreement or otherwise decided by the consortium) An External Expert Advisory Board (EEAB) will be appointed and steered by the Executive Board. The EEAB shall assist and facilitate the decisions made by the General Assembly. The Coordinator is authorised to execute with each member of the EEAB a non-disclosure agreement, which terms shall be not less stringent than those stipulated in this Consortium Agreement, no later than 30 days after their nomination or before any confidential information will be exchanged, whichever date is earlier. The Coordinator shall write the minutes of the EEAB meetings and prepare the implementation of the EEAB's suggestions. The EEAB members shall be allowed to participate in General Assembly meetings upon invitation but have not any voting rights.]

  • Order Coordination and Order Coordination-Time Specific 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Lightyear’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!