Substitution of Products Sample Clauses

Substitution of Products. Except as provided in Section VI(D), no participating SYSCO company may substitute any products for other products ordered by participating ARAMARK Components. Products which are out of stock or product substitutions made pursuant to Section VI(D) in connection with * will be communicated to each participating ARAMARK Component, prior to delivery as follows: ------------- * Material omitted and separately filed with the Commission under an application for confidential treatment. 1. If a skip day ordering procedure is implemented, the participating SYSCO company's Customer Service Representative will call those participating ARAMARK Components affected and will suggest substitute products to be shipped. Substitute products will be shipped to a participating ARAMARK Component affected only after the ARAMARK Component manager (or his designee) has approved the substitution. A substituted product of higher quality or grade than the product ordered will be sold at the price in effect at the time of the order for the product originally ordered, calculated pursuant to Section IX. A substitute product of lower quality than the product ordered, will be sold at the price in effect at the time of the order for that substitute product, calculated pursuant to Section IX. 2. For those ARAMARK Components where a skip day ordering procedure is not implemented the participating SYSCO company's Customer Service Representative will use his or her best efforts to communicate out of stock products and substitutions of products prior to delivery. 3. The term "skip day ordering procedure" is defined as that ordering procedure where an ARAMARK Component specifically agrees to allow for one or more calendar days, as specified by the ARAMARK Component, between the day the order is placed and the day the product ordered is delivered.
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Substitution of Products. Except as provided in Section 6(d), no Operating Company may substitute any products for other products ordered by Components. Products which are out of stock or product substitutions made pursuant to Section 6(d) in connection with ARAMARK’s Specified Products Program will be communicated to each Component, prior to delivery as follows. The Operating Company’s Customer Service Representative will call those Components affected and will suggest substitute products to be shipped. Substitute products will be shipped to a Component affected only after the Component manager (or his designee) has approved * Material omitted and separately filed with the Commission under an application for confidential treatment. the substitution. A substituted product of higher quality or grade than the product ordered will be sold at the price in effect at the time of the order for the product originally ordered, calculated pursuant to Section 9 unless the substitution is the result of a supplier’s failure to timely supply SYSCO. A substitute product of lower quality than the product ordered, will be sold at the price in effect at the time of the order for that substitute product, calculated pursuant to Section 9.
Sample 1
Substitution of Products. PROCESSES A. Substitutions requested by the Contractor will be subject to the County’s prior written acceptance and at the County’s sole discretion.
Sample 1
Substitution of Products. No substitutions of Products or accessories shall be done without prior written permission from Buyer.
Sample 1
Substitution of Products. Subject to Pate'x xxxsent, which consent may not be unreasonably withheld, DFC may request Pate'x xx substitute another product for any Product, in each case, such substitute product being a product that Pate'x xx reasonably capable of producing. Except for Product which is the subject of a written purchase order submitted by DFC, at any time and from time to time, DFC may cancel any order previously projected or estimated. Any substitute products shall be deemed "Products" under and as defined in this Agreement.
Sample 1
Substitution of Products. Company reserves the right to substitute a specifically reserved Product(s) in the event of mechanical or other difficulties or unforeseen situations which may arise. In case of an unexpected breakdown, accident, severe weather, or anything that may interfere with Xxxxxx’s scheduled event, Company is not liable. If Company is unable to render services due to any of these extreme cases, all payments including the retainer will be returned to Renter. This complete refund will be the full extent of damages the Renter is entitled to and no further damages will be sought by Xxxxxx.
Sample 1
Substitution of Products 
Sample 1
AutoNDA by SimpleDocs

Related to Substitution of Products

  • Reformulation of Products As of the Effective Date, and continuing thereafter, Products that Xxxxx directly manufactures, imports, distributes, sells, or offers for sale in California shall either: (a) be Reformulated Products pursuant to § 2.2, below; or (b) be labeled with a clear and reasonable exposure warning pursuant to §§ 2.3 and 2.4, below. For purposes of this Settlement Agreement, a “Reformulated Product” is a Product that is in compliance with the standard set forth in

  • PRODUCT SUBSTITUTION In the event a specified manufacturer’s Product listed in the Contract becomes unavailable or cannot be supplied by the Contractor for any reason (except as provided for in the Savings/Force Majeure Clause) a Product deemed in writing by the Commissioner to be equal to or better than the specified Product must be substituted by the Contractor at no additional cost or expense to the Authorized User. Unless otherwise specified, any substitution of Product prior to the Commissioner’s written approval may be cause for cancellation of Contract.

  • Substitution of Engines Upon the occurrence of an Event of Loss with respect to an Engine under circumstances in which an Event of Loss with respect to the Airframe has not occurred, Owner shall promptly (and in any event within 15 days after such occurrence) give the Mortgagee written notice of such Event of Loss. The Owner shall have the right at its option at any time, on at least 5 Business Days' prior notice to the Mortgagee, to substitute, and if an Event of Loss shall have occurred with respect to an Engine under circumstances in which an Event of Loss with respect to the Airframe has not occurred, shall within 60 days of the occurrence of such Event of Loss substitute, a Replacement Engine for any Engine. In such event, immediately upon the effectiveness of such substitution and without further act, (i) the replaced Engine shall thereupon be free and clear of all rights of the Mortgagee and the Lien of this Trust Indenture and shall no longer be deemed an Engine hereunder and (ii) such Replacement Engine shall become subject to this Trust Indenture and be deemed part of the Aircraft for all purposes hereof to the same extent as the replaced Engine. Such Replacement Engine shall be an engine manufactured by Engine Manufacturer that is the same model as the Engine to be replaced thereby, or an improved model, and that is suitable for installation and use on the Airframe, and that has a value, utility and remaining useful life (without regard to hours and cycles remaining until overhaul) at least equal to the Engine to be replaced thereby (assuming that such Engine had been maintained in accordance with this Trust Indenture). The Owner's right to make a replacement hereunder shall be subject to the fulfillment (which may be simultaneous with such replacement) of the following conditions precedent at the Owner's sole cost and expense, and the Mortgagee agrees to cooperate with the Owner to the extent necessary to enable it to timely satisfy such conditions: (i) an executed counterpart of each of the following documents shall be delivered to the Mortgagee: (A) a Trust Indenture Supplement covering the Replacement Engine, which shall have been duly filed for recordation pursuant to the Act or such other applicable law of the jurisdiction other than the United States in which the Aircraft of which such Engine is a part is registered in accordance with Section 4.02(e), as the case may be; (B) a full warranty xxxx of sale (as to title), covering the Replacement Engine, executed by the former owner thereof in favor of the Owner (or, at the Owner's option, other evidence of the Owner's ownership of such Replacement Engine, reasonably satisfactory to the Mortgagee); and (C) UCC financing statements covering the security interests created by this Trust Indenture (or any similar statements or other documents required to be filed or delivered pursuant to the laws of the jurisdiction in which such Aircraft may be registered) as are deemed necessary or desirable by counsel for the Mortgagee to protect the security interests of the Mortgagee in the Replacement Engine; (ii) the Owner shall cause to be delivered to the Mortgagee an opinion of counsel to the effect that the Lien of this Trust Indenture continues to be in full force and effect with respect to the Replacement Engine and such evidence of compliance with the insurance provisions of Section 4.06 with respect to such Replacement Engine as Mortgagee shall reasonably request; (iii) the Owner shall have furnished to Mortgagee an opinion of Owner's aviation law counsel reasonably satisfactory to Mortgagee and addressed to Mortgagee as to the due filing for recordation of the Trust Indenture Supplement with respect to such Replacement Engine under the Act or such other applicable law of the jurisdiction other than the United States in which the Aircraft is registered in accordance with Section 4.02(e), as the case may be; and (iv) the Owner shall have furnished to Mortgagee a certificate of a qualified aircraft engineer (who may be an employee of Owner) certifying that such Replacement Engine has a value and utility and remaining useful life (without regard to hours and cycles remaining until overhaul) at least equal to the Engine so replaced (assuming that such Engine had been maintained in accordance with this Trust Indenture). Upon satisfaction of all conditions to such substitution, (x) the Mortgagee shall execute and deliver to the Owner such documents and instruments, prepared at the Owner's expense, as the Owner shall reasonably request to evidence the release of such replaced Engine from the Lien of this Trust Indenture, (y) the Mortgagee shall assign to the Owner all claims it may have against any other Person relating to any Event of Loss giving rise to such substitution and (z) the Owner shall receive all insurance proceeds (other than those reserved to others under Section 4.06(b)) and proceeds in respect of any Event of Loss giving rise to such replacement to the extent not previously applied to the purchase price of the Replacement Engine as provided in Section 4.05(d).

  • Substitution of Equipment In the event the Computer is inoperable, ASL has a limited number of spare laptops for use while the Computer is being repaired or replaced. This agreement remains in effect for such a substitute. The Student may NOT opt to keep a broken Computer or to avoid using the Computer due to loss or damage.

  • Supply of Products ‌‌ 3.1 The Supplier warrants that the Products shall: (a) correspond with their description and any applicable Product Specification; (b) conform in all respects with the Order and any relevant sample; (c) be of satisfactory quality and fit for any purpose held out by the Supplier or made known to the Supplier by Ornua, expressly or by implication, and in this respect Ornua relies on the Supplier's skill and judgement; (d) be manufactured by properly trained and qualified personnel using all reasonable skill, care and diligence and in a good and workmanlike manner;‌ (e) where they are manufactured products, be free from defects in design, materials and workmanship and remain so for the period set out in the Product Specification or, if none is specified, for at least 12 months after delivery; (f) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Products;‌ (g) comply with all relevant standards including any UK Standards, European Standards or International Standards applicable in the UK and the country or State where the Products are to be used; and (h) in the case of Products containing food stuffs, when delivered to Ornua, comply with all applicable food and hygiene legislation and regulations and best industry practice.‌ 3.2 The Supplier shall ensure that at all times it has and maintains all licences, permissions, authorisations, consents and permits needed to carry out its obligations under the Contract in respect of the supply of Products. Breach of this Condition shall be deemed a material breach of the Contract. 3.3 Ornua may inspect and test the Products at any time before delivery. The Supplier shall remain fully responsible for the Products despite any such inspection or testing and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under the Contract. 3.4 If following such inspection or testing Ornua considers that the Products do not comply or are unlikely to comply with the Supplier's undertakings at clause 3.1, Ornua shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance.‌ 3.5 Ornua may conduct further inspections and tests after the Supplier has carried out its remedial actions.

  • Acceptance of Products All drawings, specifications, technical documentation, samples, prototypes and Products are approved and/or accepted by Buyer if Buyer does not provide Seller a written objection and/or rejection within 10 days of receipt or other reasonable time established in writing by Seller. Failure to provide written objection and/or rejection will constitute an irrevocable acceptance by the Buyer of the Products. Any written objection and/or rejection must state with specificity all defects and non-conformities upon which Buyer will rely to support its rejection of the Products. ALL DEFECTS AND NON- CONFORMITIES WHICH ARE NOT SPECIFIED ARE WAIVED BY BUYER. If Xxxxx rejects the Products and, if requested by Seller, Xxxxx will return them to Seller at Buyer’s cost, within three days, or Buyer has irrevocably accepted the Products. No attempted revocation of acceptance will be effective, and Buyer will be limited to any available remedies specifically provided in the Terms for breach of warranty. Seller has a reasonable period of time to cure any non- conformity.

  • Substitution of Receipts At the request of a Holder, the Depositary shall, for the purpose of substituting a certificated Receipt with a Receipt issued through any book-entry system, including, without limitation, DRS/Profile, or vice versa, execute and Deliver a certificated Receipt or deliver a statement, as the case may be, for any authorized number of ADSs requested, evidencing the same aggregate number of ADSs as those evidenced by the relevant Receipt.

  • Substitution of Key Personnel Consultant has represented to City that certain key personnel will perform and coordinate the Services under this Agreement. Should one or more of such personnel become unavailable, Consultant may substitute other personnel of at least equal competence upon written approval of City. In the event that City and Consultant cannot agree as to the substitution of key personnel, City shall be entitled to terminate this Agreement for cause. As discussed below, any personnel who fail or refuse to perform the Services in a manner acceptable to the City, or who are determined by the City to be uncooperative, incompetent, a threat to the adequate or timely completion of the Project or a threat to the safety of persons or property, shall be promptly removed from the Project by the Consultant at the request of the City. The key personnel for performance of this Agreement are as follows: Xxxxx Xxxxx.

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

  • Supply of Product 4.1 DAEWOONG shall manufacture and supply Product to AEON in a primary packaged and labeled form. Product packaging shall display the logo of DAEWOONG (to the extent required by applicable law) and AEON and the outer label shall be marked using English language in accordance with applicable laws and Product’s Regulatory Approvals. 4.2 AEON’s estimate sales forecast of the Product during the Term of Agreement in the Territory in the Field is set forth in Annex D. Within ninety (90) days after the Effective Date, AEON shall provide DAEWOONG with a non-binding twelve (12) month rolling forecast of its requirements of Product, which the Parties agree is not a commitment to buy any stated quantity. Thereafter, on at least a quarterly basis, AEON shall provide DAEWOONG with an updated twelve (12) month rolling forecast, together with a binding six (6) month forecast to the extent AEON has requested Safety Stock as described in Article 4.10 below. Each such forecast shah be referred to herein as a “Forecast.” 4.3 AEON may from time to time submit Purchase Orders to DAEWOONG for Product in accordance with the forecasting requirements in Article 4.2. Orders will be shipped on CIF Los Angeles port. 4.4 Once a Purchase Order for Product and Product Samples has been received by DAEWOONG, it shall be considered as irrevocable. 4.5 AEON agrees herein to place an Order for Product not later than [***] from receipt of Regulatory Approval. 4.6 Individual Purchase Orders of Product shall be placed at least [***] in advance of the required delivery date. 4.7 For the purpose of Commercialization, AEON will store and maintain the full quantity of Product in a clean, secured area in accordance with the reasonable directions and specifications provided by DAEWOONG in writing in connection thereof in the Territory. AEON will advise DAEWOONG on the applicable requirements specifically deriving from the laws and regulations in the Territory. 4.8 AEON agrees that DAEWOONG and its collaborators and agents, in DAEWOONG’s sole discretion, which collaborators and Agents will be subject to appropriate obligations of confidentiality, will have the right upon reasonable prior notice, to observe and to inspect and to audit AEON’s facility to ascertain compliance by AEON with the terms of this Agreement, including without limitation (a) the holding facilities for Product, and (b) AEON’s compliance with applicable law, including cGMP (if applicable). Following any such audit, DAEWOONG will discuss its observations and conclusions with AEON and corrective actions, if any, will be agreed upon by the Parties, and executed by AEON using Commercially Reasonable Efforts. 4.9 In addition to any other rights and remedies available to AEON, AEON shall have the right to recover lost profits in the event that DAEWOONG fails to deliver at least [***] in any [***] (a “Supply Default Event”). For purposes of this provision, lost profits would be equal to [***] of AEON operating profit (sales less direct expenses and the puce paid by AEON for such Products) on Products that have not been shipped against firm Purchase Orders during the period leading up to the Supply Default Event and bona fide Purchase Orders submitted by AEON that are consistent with the Forecast during the Supply Default Period (as defined below). Such payment shall be made with respect to all Product not shipped in the period giving rise to the Supply Default and for the period until DAEWOONG is again timely shipping Product to meet AEON’s needs (the “Supply Default Period”). The first such payment shall be made within [***] of the Supply Default Event, and every [***] thereafter. AEON agrees to permit full disclosure to DAEWOONG of AEON’s accounting records, solely related to the calculation of lost profits, for the [***] ending on the first day of the month in which the Supply Event Default occurred. In the event that DAEWOONG is unable to supply both AEON’s requirements of Product and its own and third parties’ requirements for Product, DAEWOONG shall allocate Product that DAEWOONG has in inventory and that DAEWOONG is able to Product, so that AEON receives its requirements of Product in priority to DAEWOONG and third parties. 4.10 At the request of AEON, DAEWOONG shall at its own cost and expense during the Term, maintain an amount of inventory of Product equal to AEON’s requirements for Product for [***] based on AEON’s most recent forecast (“Safety Stock”). The Safety Stock shall be (i) maintained for the sole benefit of AEON and its Affiliates, (ii) shall be stored at a secure facility in compliance with GMP, and (iii) shall not be used for the benefit of any other customer of DAEWOONG. DAEWOONG shall rotate the Safety Stock on a “First Expiry-First Out” basis for routine fulfillment of firm orders, subject to Article 7.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!