TRANSPORTATION AND HANDLING. All pipes and specials fabricated in the yard and temporarily stacked at the factory shall be transported carefully to the site of the pipe laying after internal cleaning. Any vehicles on which pipes are transported shall have a body of such length that the pipes do not overhang. Large pipes shall be placed on cradles and the loads properly secured during transit. Additional precautions shall be taken to avoid deformation of flexible pipes lining and coating. To maintain their circular cross-section internal struts shall be fitted in the pipes. Details of the proposed strutting system shall be submitted to the Employer’s Representative for approval and, if required by the Employer’s Representative, the method of strutting shall be demonstrated and tested on site. Wide non-abrasive or other approved slings shall be used and all hooks and other metal devices shall be well padded. Hooks engaged on the corner wall surface at pipe ends shall not be used. Steadying ropes shall be employed. The positions of lifting slings shall ensure that stresses and tendency towards deformation in the pipes are kept to a minimum. Pipes shall be unloaded on timber skids with steadying ropes or by any other means. Padding shall be provided between coated pipes, fittings/ specials and timber skids to avoid damage to the coating. As far as possible, pipes shall be unloaded on one side of the trench only. Under no circumstances shall pipes be dropped, be allowed to strike one another, be rolled freely or dragged along the ground. Pipe handling equipment shall be maintained in good condition and any equipment, which in the opinion of the Employer’s Representative may cause damage to the pipes, shall be discarded.
TRANSPORTATION AND HANDLING. A. Refer to the Contract and General Conditions and Specifications Sections for requirements pertaining to transportation and handling of materials and equipment.
B. Transport products by methods to avoid product damage; deliver in undamaged condition in manufacturers' labeled and unopened containers or packaging, dry
C. Provide equipment and personnel to handle products by methods to prevent soiling or damage.
D. Promptly inspect shipments to assure that products comply with requirements, that quantities are correct, and products are undamaged.
TRANSPORTATION AND HANDLING. A. Arrange for delivery of materials in accordance with construction schedules; coordinate to avoid conflict with sequencing of the Work and conditions at the project site.
1. When being transported to the project site by the Contractor, cover and protect materials in transit against entrance of dirt and/or weather damage.
2. Deliver materials in undamaged condition, in manufacturer's original containers or packaging, with identifying labels intact and legible.
3. Immediately upon delivery, inspect shipments to assure compliance with requirements of the Project Documents and approved submittals, and to assure that materials are properly protected and undamaged.
TRANSPORTATION AND HANDLING. A. Furnish equipment and facilities for unloading, handling, distributing and storing pipe, fittings and accessories. Make equipment available at all times for use in unloading. Do not drop or dump materials. Any materials dropped or dumped will be subject to rejection without additional justification. Pipe handled on skids shall not be rolled or skidded against the pipe on the ground.
B. Handle pipe, fittings, and accessories carefully to prevent shock or damage. Handle pipe by rolling on skids, forklift, or front end loader. Do not use material damaged in handling. Slings, hooks or pipe tongs shall be padded and used in such a manner as to prevent damage to the exterior coatings or internal lining of the pipe.
TRANSPORTATION AND HANDLING. Transport and handle Products in accordance with manufacturer's instructions.
TRANSPORTATION AND HANDLING. A. Arrange for delivery of materials in accordance with construction schedules; coordinate to avoid conflict with sequencing of the Work and conditions at the project site.
1. When being transported to the project site by the Contractor, cover and protect materials in transit against entrance of dirt and/or weather damage.
2. Deliver materials in undamaged condition, in manufacturer's original containers or packaging, with identifying labels intact and legible.
TRANSPORTATION AND HANDLING. A. Products shall be transported by methods to avoid damage and shall be delivered in undamaged condition in manufacturer's unopened containers and packaging.
B. The CONTRACTOR shall provide equipment and personnel to handle products, materials, and equipment by methods to prevent soiling and damage.
C. The CONTRACTOR shall provide additional protection during handling to prevent marring and otherwise damaging products, packaging, and surrounding surfaces.
TRANSPORTATION AND HANDLING. A. Package products for shipment in manner to prevent damage or theft; for equipment, package to avoid loss of factory calibration.
B. If special precautions are required, attach instructions prominently and legibly on outside of packaging.
C. Coordinate schedule of product delivery to designated prepared areas in order to minimize site storage time and potential damage to stored materials.
D. Schedule delivery to reduce long-term storage at site and to prevent overcrowding of construction spaces.
E. Coordinate delivery with installation time to ensure minimum holding time for items that are flammable, hazardous, easily damaged, or sensitive to deterioration, theft, and other losses.
F. Transport and handle products in accordance with manufacturer's instructions.
TRANSPORTATION AND HANDLING. A. CONTRACTOR must provide an adequate number of personnel to load and secure OWNER supplied materials. OWNER'S personnel will not load or secure products for transport.
B. Transport and handle products in accordance with manufacturer’s instructions.
C. Promptly inspect shipments to assure that products comply with requirements, quantities are correct, and products are undamaged.
D. Provide equipment and personnel to handle products by methods to prevent soiling, disfigurement, or damage.
TRANSPORTATION AND HANDLING. 1. Coordinate schedule of product delivery to designated prepared areas in order to minimize site storage time and potential damage to stored materials.
2. Transport and handle products in accordance with manufacturer's instructions.
3. Transport materials in covered trucks to prevent contamination of product and littering of surrounding areas.
4. Promptly inspect shipments to ensure that products comply with requirements, quantities are correct, and products are undamaged.
5. Provide equipment and personnel to handle products by methods to prevent soiling, disfigurement, or damage.
6. Arrange for the return of packing materials, such as wood pallets, where economically feasible.
