PROPOSED MOBILITY PROGRAMME The proposed mobility programme includes the indicative start and end months of the agreed study programme that the student will carry out abroad. The Learning Agreement must include all the educational components to be carried out by the student at the receiving institution (in table A) and it must contain as well the group of educational components that will be replaced in his/her degree by the sending institution (in table B) upon successful completion of the study programme abroad. Additional rows can be added as needed to tables A and B. Additional columns can also be added, for example, to specify the study cycle-level of the educational component. The presentation of this document may also be adapted by the institutions according to their specific needs. However, in every case, the two tables A and B must be kept separated, i.e. they cannot be merged. The objective is to make clear that there needs to be no one to one correspondence between the courses followed abroad and the ones replaced at the sending institutions. The aim is rather that a group of learning outcomes achieved abroad replaces a group of learning outcomes at the sending institution, without having a one to one correspondence between particular modules or courses. A normal academic year of full-time study is normally made up of educational components totalling 60 ECTS* credits. It is recommended that for mobility periods shorter than a full academic year, the educational components selected should equate to a roughly proportionate number of credits. In case the student follows additional educational components beyond those required for his/her degree programme, these additional credits must also be listed in the study programme outlined in table A. When mobility windows are embedded in the curriculum, it will be enough to fill in table B with a single line as described below: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Mobility window … Total: 30 Otherwise, the group of components will be included in Table B as follows: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Course x … 10 Module y … 10 Laboratory work … 10 Total: 30 The sending institution must fully recognise the number of ECTS* credits contained in table A if there are no changes to the study programme abroad and the student successfully completes it. Any exception to this rule should be clearly stated in an annex of the Learning Agreement and agreed by all parties. Example of justification for non-recognition: the student has already accumulated the number of credits required for his/her degree and does not need some of the credits gained abroad. Since the recognition will be granted to a group of components and it does not need to be based on a one to one correspondence between single educational components, the sending institution must foresee which provisions will apply if the student does not successfully complete some of the educational components from his study programme abroad. A web link towards these provisions should be provided in the Learning Agreement. The student will commit to reach a certain level of language competence in the main language of instruction by the start of the study period. The level of the student will be assessed after his/her selection with the Erasmus+ online assessment tool when available (the results will be sent to the sending institution) or else by any other mean to be decided by the sending institution. A recommended level has been agreed between the sending and receiving institutions in the inter-institutional agreement. In case the student would not already have this level when he/she signs the Learning Agreement, he/she commits to reach it with the support to be provided by the sending or receiving institution (either with courses that can be funded by the organisational support grant or with the Erasmus+ online tutored courses). All parties must sign the document; however, it is not compulsory to circulate papers with original signatures, scanned copies of signatures or digital signatures may be accepted, depending on the national legislation. * In countries where the "ECTS" system it is not in place, in particular for institutions located in partner countries not participating in the Bologna process, "ECTS" needs to be replaced in all tables by the name of the equivalent system that is used and a weblink to an explanation to the system should be added. CHANGES TO THE ORIGINAL LEARNING AGREEMENT The section to be completed during the mobility is needed only if changes have to be introduced into the original Learning Agreement. In that case, the section to be completed before the mobility should be kept unchanged and changes should be described in this section. Changes to the mobility study programme should be exceptional, as the three parties have already agreed on a group of educational components that will be taken abroad, in the light of the course catalogue that the receiving institution has committed to publish well in advance of the mobility periods and to update regularly as ECHE holder. However, introducing changes might be unavoidable due to, for example, timetable conflicts. Other reasons for a change can be the request for an extension of the duration of the mobility programme abroad. Such a request can be made by the student at the latest one month before the foreseen end date. These changes to the mobility study programme should be agreed by all parties within four to seven weeks (after the start of each semester). Any party can request changes within the first two to five-week period after regular classes/educational components have started for a given semester. The exact deadline has to be decided by the institutions. The shorter the planned mobility period, the shorter should be the window for changes. All these changes have to be agreed by the three parties within a two-week period following the request. In case of changes due to an extension of the duration of the mobility period, changes should be made as timely as possible as well. Changes to the study programme abroad should be listed in table C and, once they are agreed by all parties, the sending institution commits to fully recognise the number of ECTS credits as presented in table C. Any exception to this rule should be documented in an annex of the Learning Agreement and agreed by all parties. Only if the changes described in table C affect the group of educational components in the student's degree (table B) that will be replaced at the sending institution upon successful completion of the study programme abroad, a revised version should be inserted and labelled as "Table D: Revised group of educational components in the student's degree that will be replaced at sending institution". Additional rows and columns can be added as needed to tables C and D. All parties must confirm that the proposed amendments to the Learning Agreement are approved. For this specific section, original or scanned signatures are not mandatory and an approval by email may be enough. The procedure has to be decided by the sending institution, depending on the national legislation.
Agreement Exceptions/Deviations Explanation If the proposing Vendor desires to deviate form the Vendor Agreement language, all such deviations must be listed on this attribute, with complete and detailed conditions and information included. TIPS will consider any deviations in its proposal award decisions, and TIPS reserves the right to accept or reject any proposal based upon any deviations indicated below. In the absence of any deviation entry on this attribute, the proposer assures TIPS of their full compliance with the Vendor Agreement. No response
Project Approach Project schedules and budgets are reviewed by the Project Manager on a weekly basis during our company-wide Project Managers Meeting using project status reports generated by our control software (Deltek Vision). Progress is compared to the schedule and budget to ensure adequate resources are available and that necessary coordination is occurring. Costs are reported real time, with actual labor based on time sheet entry and actual expense costs based on invoices. The reporting system can be customized to track specific tasks or efforts in multiple categories, making it flexible enough to adapt to any project specific requirements. We hold regular project coordination meetings to facilitate communication and information transfer among the design team. These meetings are held weekly and are supplemented with e-mail communication, as well as telephone conversations. We hold monthly project status meetings with your project manager to update project status, discuss priorities, and receive direction from City staff. This provides an opportunity for communication and information to flow openly between the City and the design team. These meetings are supplemented by communications that will occur via e-mail and telephone. We conduct meetings with other agencies and stakeholders impacted by the work as needed. E-mail and telephone communication work well for quick questions or minor issues, but we have found that the most effective means of communication with other agencies and stakeholders is the “old-fashioned” face- to-face mexxxxx. Xxbble’s record of providing quality civil engineering services to our clients reflects our ability to manage multiple projects effectively and efficiently. Our philosophy is that each project is personally overseen by one of our principal officers, thereby providing immediate attention to all project aspects (i.e. negotiations, communications, schedule, budgets).
Solicitation Exceptions/Deviations Explanation If the bidder intends to deviate from the General Conditions Standard Terms and Conditions or Item Specifications listed in this proposal invitation, all such deviations must be listed on this attribute, with complete and detailed conditions and information included or attached. TIPS will consider any deviations in its proposal award decisions, and TIPS reserves the right to accept or reject any bid based upon any deviations indicated below or in any attachments or inclusions. In the absence of any deviation entry on this attribute, the proposer assures TIPS of their full compliance with the Standard Terms and Conditions, Item Specifications, and all other information contained in this Solicitation.
Target Audience The target audience for this policy includes, but is not limited to, all faculty, trainees/students, and other members of MD Anderson’s workforce, including Facilities Management (FM) Project Managers, FM Operations and Maintenance (O&M) Staff, Contractors, and Stakeholders who request a Scheduled Utility Outage for: • New construction. • Renovation. • Maintenance.
Bidding and Proposal Phase 1.5.1 In conjunction with the development of the Guaranteed Maximum Price and at other times as appropriate to the Project, the Architect/Engineer shall assist the Owner and Construction Manager by receiving and recording requests for Bid and Request for Proposal (“RFP”) Documents, receiving and resolving questions about Bid and RFP Documents; preparing addenda, issuing addenda, and accounting for addenda issued; attending pre-bid and pre-proposal conferences and HUB meetings; evaluating bids and proposals; and assisting in preparing and awarding multiple contracts for construction. Architect/Engineer shall answer inquiries from bidders and proposers at Owner’s request, and shall prepare and issue any necessary addenda to the bidding or proposal documents.
Target Population The Grantee shall ensure that diversion programs and services provided under this grant are designed to serve juvenile offenders who are at risk of commitment to Department.
Interview Process Interviews will take place over a period of ninety (90) days. The interviews both of bargaining unit employees and of managers will be conducted jointly by Union/Industry members of the Technical Committee (or designates).
Interview Questions Explanation Why do you want to be a Board member? What specific skills would you bring to the Board? Please give specific examples of your ability in interpersonal relationships and teamwork. What do you see as the role of a Board member? What have you done to prepare yourself for the challenges of being a Board member? Interview questions are at the Board's sole discretion. This list is not exhaustive, but it may help the Board tailor its questions toward finding a candidate who will approach Board membership with a clear understanding of its demands and expectations along with a constructive attitude toward the challenge. The Board may also want to consider allowing an equal amount of time for each interview. Please describe your previous community or non-profit experiences. What areas in the district would you like to see the Board strengthen? See IASB's Recruiting School Board Candidates, available at: xxx.xxxx.xxx/xxxxxxxx/xxxxxxxxxx.xxx A prospective candidate to fill a vacancy may raise other specific issues that the Board will want to cover during an interview. What is your availability to meet the time, training commitments, and other responsibilities required for Board membership? Describe what legacy you would like to leave behind. Conduct interviews with candidates (interviews may occur in closed session pursuant to 5 ILCS 120/2(c)(3)). Interview Plan Explanation In each interview, the Board President will: Introduce Board members to the candidate at the beginning of the interview. Describe the Board's interview process, selection process, and ask the candidate if he or she has questions about the Board's process for filling a vacancy by appointment. Describe the District's philosophy or mission statement. Describe the vacancy for the candidate by reviewing the: (1) qualifications, and (2) general duties and responsibilities of the Board and the Board members, including fiduciary responsibilities, conflict of interest, ethics and gift ban, and general Board member development. Begin asking the interview questions that the Board developed. Ask the candidate whether he or she has any questions for the Board. Thank the candidate and inform the candidate when the Board expects to make a decision and how the candidate will be contacted regarding the Board's decision. The Board President will lead the Board as it interviews prospective candidates. See Board policy 2:110, Qualifications, Term, and Duties of Board Officers. The president presides at all meetings. 105 ILCS 5/10-13. The Board may also want to consider allowing an equal amount of time for each interview. Fill vacancy by a vote during an open meeting of the Board before the 60th day (105 ILCS 5/10-10, amended by P.A. 101-67, eff. 1-1-20). Assist the appointed Board member in filing his or her statement of economic interest (5 ILCS 420/4A-105(c). Announce the appointment to District staff and community. Announcement Explanation The Board appointed [appointee's name] to fill the vacancy on the Board. The appointment will be from [date] to [date]. The Board previously established qualifications for the appointee in a careful and thoughtful manner. [Appointee's name] meets these qualifications and has demonstrated the willingness to accept the duties and responsibilities of a Board member. [Appointee's name] brings a clear understanding of the demands and expectations of being a Board member along with a constructive attitude toward the challenge. The contents of the appointment announcement and length of time it is displayed are at the Board's sole discretion. The Board may want to consider announcing the appointment during its meeting and also by posting it in the same places that it posted the vacancy announcement. See Board policy 8:10, Connection with the Community. Administer the Oath of Office and begin orientation. Guidelines Explanation See Board policy 2:80, Board Member Oath and Conduct. Each individual, before taking his or her seat on the Board, must take an oath in substantially the form given in 105 ILCS 5/10-16.5. See Board policy 2:120, Board Member Development, and 2:120-E, Guidelines for Serving as a Mentor to a NewSchool Board Member. Orientation assists new Board members to learn, understand, and practice effective governance principles. See the IASB Foundational Principles of Effective Governance, available at: xxx.xxxx.xxx/xxxxxxxxxx_xxxxx.xxx. Inform IASB of the newly appointed Board member's name and directory information. DATED : December 16, 2019 Ottawa THSD 140
Final Approval Order 62. The Parties shall jointly seek entry of a Final Approval Order, the text of which the Parties shall agree upon. The dismissal orders, motions or stipulation to implement this Section shall, among other things, seek or provide for a dismissal with prejudice and waiving any rights of appeal.
