WORKING HOURS AND OVERTIME 8.1 The normal working day shall be 8 consecutive hours exclusive of meal period. The normal work week shall be 40 hours.
8.1.1 The Company may, where required, institute 10-hour (exclusive of meal period)/4 day per week driver positions in accordance with Article 5.2.
8.2 Warehousepersons B shall be paid a minimum of 3 hours’ pay at the straight time rate, and if required to perform work beyond 3 hours shall be paid on the minute basis for work in excess of 3 hours. Such work will be offered in order of length of Company service.
8.3 The normal work week shall be Monday to Friday with rest days Sunday and Saturday; however, due to the operational requirements of the Company, a departure to rest days of Sunday and Monday or two consecutive days during the week may, to meet operational necessity, be instituted. Possible use of rest days other than Saturday, Sunday or Monday, where these may be required under this Agreement, to be explored by the parties.
8.4 All hours worked in excess of 8 hours in any one day, or 40 hours in any one week, shall be paid at one and one-half times the hourly rate of pay. This does not apply to positions as outlined in Article 8.1.1.
8.4.1 All hours worked in excess of 10 hours in any one day, or 40 hours in any one week, as specified in Article 8.1.1 shall be paid at one and one-half times the hourly rate of pay.
8.5 Employees, if required to work on regularly assigned rest days, shall be paid at the rate of time and one-half time on the actual minute basis with a minimum payment of 4 hours at the pro rata hourly rate.
8.6 Where work is required by the Company to be performed on a day which is not part of any assignment, it may be performed by an available extra or unassigned employee who will otherwise not have 40 hours of work that week. Overtime shall be allocated on the basis of seniority wherever possible, in a voluntary manner, within the work classification and shifts, provided the employee is capable of performing the duties; however, upon reaching the bottom of the seniority list in that classification and shift, the junior employee(s) will be required, in reverse order, to work the overtime.
8.7 Excluding Linehaul operations, employees shall not be required to take more than 60 minutes for a meal period and, if practical, 30-minute meal period will be utilized. Lunch hour for employees holding City Tractor or Driver Representative positions will commence between the end of the third hour of the shift and the end of the sixth hour of the shift. This clause only applies to employees holding bulletin positions.
8.8 All employees working in excess of three (3) hours will receive a fifteen (15) minute paid coffee break. A fifteen (15) minute coffee break without loss of pay will commence after approximately two hours of work, or at or about the mid-point of the first half after an employee reports for duty. A second fifteen (15) minute paid coffee break shall be after six hours of work where the tour of duty is in excess of six hours. There will be a third paid15 minute break if 3 hours of overtime are completed. This break is to be taken after the second hour of overtime has been completed. These breaks shall not be cumulative.
8.9 Employees shall be allowed to elect to bank overtime in lieu of pay to maximum of 40 hours at the rate of one and one-half hours banked for every one hour worked. Overtime worked will automatically be used to replenish the bank to the maximum of 40 hours during the course of the year. Any balance of banked overtime unused will be carried over to the next year unless the employee gives notice to withdraw from the program or requests to be paid out any unused portion as indicated in 8.9.1.
8.9.1 A request to bank overtime must be made in writing and received by the Company by March 7th of the year. Banked overtime will continue unless the Company is notified by the employee he wishes to opt out of the program. Upon written request to the Company by March 7th of each year an employee shall be entitled to be paid for all unused banked hours accumulated for the previous year. The Company will issue payment by March 31st. Banked overtime accumulation will be discontinued effective the first pay period in November until the last pay period in December inclusive each year. During this period employees will be able to withdraw banked overtime already accumulated, however all overtime worked in this period will be paid as part of the regular pay process. Banked overtime shall be secondary to annual vacations. The Company officer in charge or their designate must approve all requests, in writing, for leave to be drawn on banked time. An employee will make their request in writing 7 working days prior to the requested time off. Laid off employees will be allowed to withdraw banked time on days when no work is made available to them.
8.9.2 An employee off duty due to bona fide illness who is not claiming Short Term Disability Benefits payments will be permitted to use accumulated Banked Overtime as of the second day of their absence.
8.9.3 An employee off duty due to bone fide illness who is eligible to receive Short Term Disability benefit payments will be permitted to use accumulated Banked Overtime to offset the three- day waiting period required by the STD plan.
8.9.4 When a request to use Banked Overtime is granted, it will not be withdrawn after approval unless otherwise agreed by the employee and the supervisor.
8.9.5 Banked Overtime may be used in the event of a shortage of work occurs and the Company asks for volunteers to take a day off. Should the employee wish to use an annual vacation day or Banked Overtime Day to compensate for the days lost earnings, their request will not be denied.
GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site.
Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer.
Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations.
Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage.
Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer.
Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized.
Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel.
Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations.
Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job.
Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours.
Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement.
Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.
Safe Working Conditions The Employer undertakes to maintain office furniture, equipment, etc., in a practical and safe condition in order to avoid injury to employees or damage to their attire. Employees, for their part and in their own interest, are expected to advise the Employer of any such potentially injurious equipment.
Unsafe Working Conditions Employees shall be recognized by the Employer to have the competence to determine what constitutes unsafe working conditions within their discipline. No employee shall be disciplined for refusal to work in a situation which is deemed unsafe beyond the reasonable requirements of the employee's job.
Normal Working Hours Prevailing Wage Rate Projects: Work performed from 7:00 a.m. until 4:00
Other Than Normal Working Hours Non-prevailing Wage Rate Projects: Work performed from 4:00 p.m. to 7:00 a.m. Monday to Friday, and any time Saturday, Sunday, and Holidays. The Contractor will perform Tasks during Other Than Normal Working Hours for the Unit Price set forth in the CTC multiplied by the Adjustment Factor of: 1.
Flexible Working Hours The Employer will, where operational requirements and efficiency of the service permit, authorize experiments with flexible working hours if the Employer is satisfied that an adequate number of Employees have requested and wish to participate in such an experiment.
Working Hours For the purposes of this Agreement “
Geographic Area and Sector Specific Allowances, Conditions and Exceptions The following allowances and conditions shall apply where relevant. Where the Employer does work which falls under the following headings, the Employer agrees to pay and observe the relevant respective conditions and/or exceptions set out below in each case.
Standard Work Week The standard work week for full-time employees covered by this Agreement shall be forty (40) hours, exclusive of the time allotted for meal periods, consisting of five (5) consecutive work days followed by two (2) consecutive days off. The week shall commence with the shift that includes 12:01 A.M. Sunday of each calendar week and end at the start of the shift that includes 12:00 midnight the following Saturday. The Employer retains the right to modify the work schedules to meet operational needs.
