Category B Error definition

Category B Error means the Error, such as when the use or the functionality of the System, or any part thereof, is limited by the Error, or any of the functions of the System cannot be used. data and/or work executed by a user is lost in consequence of such Error
Category B Error. “ means any Error occurred as follows: užívání nebo funkčnost Systému popřípadě jakékoliv jeho části je Chybou omezeno, nebo the use or functionality of the System or any part thereof is limited due to the Error, or nelze užívat některou z funkcí Systému, nebo any of the System’s functions cannot be used, or Systém nebo kterákoli jeho část vykazuje takové nestandardní chování, které ztěžuje užívání ostatních provozních systémů Objednatele propojených se Systémem, nebo the System or any of its part shows such non-standard behavior, which makes the use of other production systems of the Customer that are integrated with the System difficult, or odezva Systému na dotaz učiněný prostřednictvím grafického uživatelského rozhraní na pracovních stanicích PC je delší než 2 (dvě) sekundy a kratší než 5 (pět) sekund. Tento parametr se neuplatní v případě, kdy dochází k: the System’s response to any query made by means of a graphical user interface at PC workstations is longer than 2 (two) seconds and shorter than 5 (five) seconds. This parameter will not be used in the following cases: zpracování dat mimo interval 24 hodin, jehož počátek a konec určuje Objednatel a ve kterém Objednatel učinil příslušný dotaz, nebo, data processing outside the 24 hour interval, the beginning and end of which is set by the Customer, and within which the Customer placed the respective query, or vytváření dotazů nad daty v intervalu delším než ± 24 hodin od okamžiku učinění dotazu, nebo creation of queries over data in an interval longer than ± 24 hours from the moment of placing of the query, or vytváření dalších Objednatelem odsouhlasených uživatelských dotazů skrze grafické uživatelské rozhraní (GUI). creation of other user defined queries approved by the Customer using graphic user interface (GUI). „Chyba kategorie C“ znamená Chybu, která “Category C Error“ means any Error which nebrání nebo má zcela minimální vliv na řádné užívání nebo funkčnost Díla, a does not prevent or has a minimum effect on the proper use or functionality of the Deliverable, and má minimální vliv na užívání Systému jako celku. has a minimum impact on the use of the System as a whole.
Category B Error means an Error that is manifested by the use or the functionality of the Software and/or Hardware are restricted by the Error, in particular, but not limited to, when the Software and/or the Hardware process the Inputs slowly or when some non-essential functionality of the Software and/or Hardware is not available or usable.

Examples of Category B Error in a sentence

  • The Contractor undertakes, that: the sum of the total duration of Unavailability and the total duration of the Category A Error will not exceed 72 hours per calendar year, the total duration of the Category B Error will not exceed 240 hours per calendar year, the total duration of the Category C Error will not exceed 480 hours per calendar year.

  • III.11.1 hereof Category B Error 0.2% of the amount corresponding to the twelve-times the monthly Price for each commenced day exceeding the limit stipulated in Art.


More Definitions of Category B Error

Category B Error means any Error occurred as follows:
Category B Error means a fault which causes serious reduction of the functionality of the System, Hardware and/or Software, or a loss of full redundancy, performance degradation (serious performance issues).
Category B Error. “ means any Error occurred as follows: užívání nebo funkčnost Systému popřípadě jakékoliv jeho části je Chybou omezeno, nebo the use or functionality of the System or any part thereof is limited due to the Error, or nelze užívat některou z funkcí Systému, nebo any of the System’s functions cannot be used, or odezva Systému na jakýkoliv dotaz je delší než 2 (dvě) sekundy a kratší než 5 (pět) sekund. the System’s response to any query is longer than 2 (two) seconds and shorter than 5 (five) seconds.
Category B Error means an Error which is characterized as follows:

Related to Category B Error

  • Category B means that the base prospectus shall include all the general principles related to the information required, and only the details which are unknown at the time of the approval of the base prospectus can be left in blank for later insertion in the final terms;

  • Category 3 means those affected lands and support facilities if those lands supported operations which were not completed or substantially completed prior to July 1, 1973 (the effective date of the Wyoming Environmental Quality Act) and any affected lands or support facilities taken out of use on or after July 1, 1973 and before May 25, 1975 (the effective date of the Division’s 1975 Rules and Regulations).

  • NAV Error means an error in the computation of the net asset value for a Fund or class as more fully described in the NAV Error Policy.

  • Category 4 Data is data that is confidential and requires special handling due to statutes or regulations that require especially strict protection of the data and from which especially serious consequences may arise in the event of any compromise of such data. Data classified as Category 4 includes but is not limited to data protected by: the Health Insurance Portability and Accountability Act (HIPAA), Pub. L. 104-191 as amended by the Health Information Technology for Economic and Clinical Health Act of 2009 (HITECH), 45 CFR Parts 160 and 164; the Family Educational Rights and Privacy Act (FERPA), 20 U.S.C. §1232g; 34 CFR Part 99; Internal Revenue Service Publication 1075 (xxxxx://xxx.xxx.xxx/pub/irs-pdf/p1075.pdf); Substance Abuse and Mental Health Services Administration regulations on Confidentiality of Alcohol and Drug Abuse Patient Records, 42 CFR Part 2; and/or Criminal Justice Information Services, 28 CFR Part 20.

  • Category A means the relevant information which shall be included in the base prospectus. This information cannot be left in blank for later insertion in the final terms;

  • Medication error means any preventable event that may cause or lead to inappropriate medication use or patient harm, while the medication is in the control of the health care professional, patient, or consumer. Such events may be related to professional practice, health care products, procedures, and systems including, but not limited to: prescribing; order communication; product labeling, packaging and nomenclature; compounding; dispensing; distribution; administration; education; monitoring; and use.

  • Category 2 Training: This category includes services related to training state employees to understand and apply Agile concepts and tools.

  • Category 1 means medical education activities that have been designated as Category 1 by the Accreditation Council for Continuing Medical Education (ACCME), the American Osteopathic Association (AOA), a state medical society, or an equivalent organization.

  • Supplier Profit Margin means, in relation to a period, the Supplier Profit for the relevant period divided by the total Charges over the same period in respect of any Call Off Agreements and expressed as a percentage;

  • Level IV Pricing applies on any day on which (i) the Borrower’s long-term debt is rated BBB+ or higher by S&P or Baa1 or higher by Moody’s and (ii) none of Level I Pricing, Level II Pricing or Level III Pricing applies.

  • Special Category Data means any personal data revealing racial or ethnic origin, political opinions, religious or philosophical beliefs, or trade union membership, and the processing of genetic data, biometric data for the purpose of uniquely identifying a natural person, data concerning health or data concerning a natural person's sex life or sexual orientation.

  • Licensed Level means a) when referenced in the context of a Named User, the quantity of Metric for which each individual Named User category and type is licensed -and- b) when referenced in the context of a Package, the quantity of Metric for which each individual Package is licensed; and

  • Critical Illness means an illness, sickness or disease or corrective measure as specified in Section 6 of this policy document.

  • Clinical categories means the groups into which hospital treatments are categorised by type, e.g., brain and nervous system, kidney and bladder, and digestive system. At the time of writing there were 38 categories in the Medicare clinical categories system.

  • Working level month (WLM) means an exposure to 1 working level for 170 hours (2,000 working hours per year divided by 12 months per year is approximately equal to 170 hours per month).

  • Service Level Failure means a failure to perform the Software Support Services fully in compliance with the Support Service Level Requirements.

  • Severity Level means the actual impact of a Defect on a user’s operational environment as further described in the table below.

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Level II Pricing applies on any day on which (i) the Borrower’s long-term debt is rated A or higher by S&P or A2 or higher by Moody’s and (ii) Level I Pricing does not apply.

  • Level III Pricing applies on any day on which (i) the Borrower’s long-term debt is rated A- or higher by S&P or A3 or higher by Moody’s and (ii) neither Level I Pricing nor Level II Pricing applies.

  • Level I Pricing applies on any day on which the Borrower’s long-term debt is rated A+ or higher by S&P or A1 or higher by Moody’s.

  • Service Level means the standard set forth below by which IBM measures the level of service it provides in this SLA.

  • Clerical error means a clerical error in the processing of an Order, and includes, but is not limited to, the following: (i) a transmission error, including but not limited to, an Order sent to the wrong address or number, failure to transmit certain pages or illegible transmission, (ii) failure to transmit an Order received from one or more Existing Owners or Potential Owners (including Orders from the Broker-Dealer which were not originated by the Auction Desk) prior to the Broker-Dealer Deadline or generated by the Broker-Dealer’s Auction Desk for its own account prior to the Submission Deadline or (iii) a typographical error. Determining whether an error is a “Clerical Error” is within the reasonable judgment of the Broker-Dealer, provided that the Broker-Dealer has a record of the correct Order that shows it was so received or so generated prior to the Broker-Dealer Deadline or the Submission Deadline, as applicable.

  • Top Level Domain means the portion of the Domain Name to the right of the right-most period. (In the example, “COM”.) “Second Level Domain” means that portion of a domain name to the left of the right-most period, up to the second period from the right, if any, plus the Top Level Domain. (In the example, “XXXXXXXXX.XXX”.) “Third Level Domain” means that portion of a domain name to the left of the second period from the right, if any, up to the third period from the right, if any, plus the Second Level Domain. (In the example, “XXXXXXXXX.XXXXXXXXX.XXX”.).

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Working level (WL) means any combination of short-lived radon daughters in 1 liter of air that will result in the ultimate emission of 1.3E+5 MeV of potential alpha particle energy. The short-lived radon daughters are—for radon-222: polonium-218, lead-214, bismuth-214, and polonium-214; and for radon-220: polonium-216, lead-212, bismuth-212, and polonium-212.