CFM Designated Repair Station definition

CFM Designated Repair Station or “CFM DRS” or “DRS” - The repair facilities designated by CFM, which are certified by the AAA to perform the Services hereunder and where Services are performed on Engines.
Sample 1Sample 2Sample 3
CFM Designated Repair Station or “CFM DRS” or “DRS” - The repair facilities designated by CFM, which are certified by the AAA to perform the Services hereunder and where Services are performed on Engines. “CFM Service Program” - All off-wing work required on an Engine to restore the Engine to Serviceable condition in accordance with the Repair Specification, the Workscope and the terms of this Service Agreement, including Supplemental Services. “CLP” - The manufacturer's Current catalog or manufacturer’s Current list price pertaining to a new Engine or part thereof. “Commencement Date” – Has the meaning provided in Article 3. “Contracted Hours” - the Annual Utilization, as described in Exhibit B of this Service Agreement, multiplied by number of Engines multiplied by the number of years in the Term for each Engine. “Covered Services” - The Services described in Article 5.1. “Current” - As of the time of the applicable Service or determination. “Day” - Calendar day (excluding Saturday and Sunday) unless expressly stated otherwise in writing. If performance is due in a country on a day where that day is a public holiday, performance will be postponed until the next day which is not a public holiday or a Saturday or Sunday. CFM PROPRIETARY INFORMATION – SUBJECT TO RESTRICTIONS ON THE FIRST PAGE 16
Sample 1

Examples of CFM Designated Repair Station in a sentence

  • For this Article 9, the term “CFM” shall be deemed to include CFM, GE and Snecma, the CFM Designated Repair Station and CFM’s subsidiaries, assigns, subcontractors, suppliers, Services providers, and their respective directors, officers, employees, and agents.

  • CFM will replace such missing items at AVIANCATACA’s expense as Supplemental Services, unless (i) AVIANCATACA notifies CFM in writing within forty eight (48) hours after receiving CFM’s notice that AVIANCATACA wishes to furnish such missing items; and (ii) AVIANCATACA delivers such missing items to the CFM Designated Repair Station within three (3) weeks.

  • CFM may in CFM’s sole discretion delegate to or purchase from any CFM Designated Repair Station, part or all of any obligation, right or benefit of CFM for the performance of the CFM Service Program in conformance with the Repair Specification.

  • CFM will provide the requirements of the Repair Specification to the CFM Designated Repair Station and allow AVIANCATACA reasonable access to such facilities to perform its duties as the AVIANCATACA operator certificate holder.

  • The CFM Designated Repair Station shall be any of CFM’s overhaul facilities as set forth in Exhibit H.

  • CFM will provide the requirements of the Repair Specification to the CFM Designated Repair Station and allow AIRLINE reasonable access to such facilities to perform its duties as the airline operator certificate holder.

  • CFM will provide the requirements of the Repair Specification to the CFM Designated Repair Station and allow LAN reasonable access to such facilities to perform its duties as the airline operator certificate holder.

  • CFM may in CFM’s sole discretion delegate to or purchase from any CFM Designated Repair Station, provided the applicable CFM Designated Repair Station has been approved by AVIANCATACA and added into AVIANCATACA’s AAA approved maintenance program, such approval and addition not to be unreasonably withheld, part or all of any obligation, right or benefit of CFM for the performance of the CFM Service Program in conformance with the Repair Specification.

  • AIRLINE shall Deliver the Engine to the CFM Designated Repair Station in a basic engine configuration, equipped with the LRUs listed in Exhibit F.

  • All Engines to be Serviced will be Delivered by AVIANCATACA to the CFM Designated Repair Station.

Related to CFM Designated Repair Station

  • Designated reception site means the designated place for the reception, staging, integration, and onward movement of contractors deploying during a contingency. The designated reception site includes assigned joint reception centers and other Service or private reception sites.

  • Installation Site means the site at which the Product is originally installed.

  • Tourism destination project means a qualified non-gaming business facility that will be among the most visited privately owned or operated tourism or recreation sites in the State, and which is located within the qualified incentive area and has been determined by the authority to be in an area appropriate for development and in need of economic development incentive assistance, including a non-gaming business within an established Tourism District with a significant impact on the economic viability of that District.

  • Project Location means the points or areas designated as such on Exhibit A and located on the ground by reference to points, stations, natural land features, improvements, or area boundary signs. STATE means the Oregon Department of Forestry, State Forester, or a duly Authorized Representative of the State Forester.

  • Airport Ground Support Equipment means vehicles and equipment used at an airport to service aircraft between flights.

  • Service Location means a location at which a member obtains a covered service provided by a physician or other licensed practitioner of the healing arts under the terms of a contract.

  • Standard equipment means the basic configuration of a vehicle which is equipped with all the features that are required under the regulatory acts of the Contracting Party including all features that are fitted without giving rise to any further specifications on configuration or equipment level.

  • Required Repairs shall have the meaning set forth in Section 7.1.1 hereof.

  • Equipment with Specific Operational Limits means any Equipment related to the thermal oxidation of waste or waste derived fuels, fume incinerators or any other Equipment that is specifically referenced in any published Ministry document that outlines specific operational guidance that must be considered by the Director in issuing of a Certificate of Approval.

  • Anchor location means the physical location from which:

  • Service Locations means those locations set forth on Exhibit B.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Owner’s Designated Representative (ODR means the individual assigned by Owner to act on its behalf and to undertake certain activities as specifically outlined in the Contract. ODR is the only party authorized to direct changes to the scope, cost, or time of the Contract.

  • Project Equipment means the items of machinery, equipment or other personal property used in connection with the construction and development of the Project pursuant to the provisions hereof, and all replacements thereof and substitutions therefor made pursuant to this Agreement.

  • The Project Site, where applicable, means the place or places named in the SCC.

  • Additional Equipment means equipment that is not factory fitted in the Vehicle, including but not limited to navigation equipment (GPS), baby seat, bicycle rack etcetera;

  • Constructional Plant means all appliances or things whatever nature required in or about the execution, completion or maintenance of the works or temporary works (as hereinafter defined) but does not include materials or other things intended to form or forming part of the permanent work or temporary housing, hutting, office, stores, etc.,

  • Designated Equipment means any equipment designated in the SLA, upon which the Licensed System may be used; Documentation means operating manuals and other printed materials which assist the Customer to use the Licensed System including any technical and user software material as published by Pentana Solutions; Escalation Request is as set out in the SLA;

  • Required Repair Fund shall have the meaning set forth in Section 7.1.1 hereof.

  • Service Equipment means any equipment, Software, systems, cabling and facilities provided by or on behalf of Verizon and used to facilitate provision of the Services at a Customer Site. Ownership of the Service Equipment does not pass to Customer. Service Equipment does not include Verizon Facilities.

  • Repair facility Means any licensed automotive REPAIR FACILITY capable of performing repair services to a COVERED PART, approved by the ADMINISTRATOR, and at which YOU seek to acquire service under this CONTRACT.

  • Systems and Equipment means any plant (including any central plant), machinery, transformers, duct work, cable, wires, and other equipment, facilities, and systems designed to supply heat, ventilation, air conditioning and humidity or any other services or utilities, or comprising or serving as any component or portion of the electrical, gas, steam, plumbing, sprinkler, communications, alarm, lab, security, or fire/life safety systems or equipment, or any other mechanical, electrical, electronic, computer or other systems or equipment which serve the Building and/or any other building in the Project in whole or in part.

  • construction site means a workplace where construction work is being performed;

  • Passenger area means the area designed to seat the driver and passengers while a motor vehicle is in operation and any area that is readily accessible to the driver or a passenger while in his or her seating position, including but not limited to any type of glove or storage compartment accessible to passengers or driver.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Replacement Equipment means operational equipment or other parts used by Tenant to replace any of the Equipment.