Packet Switching definition

Packet Switching or “Packet Switched” refers to the routing or forwarding of packets, frames, cells, or other data units based on address or other routing information contained in the packets, frames, cells or other data units, and the functions that are performed by the digital subscriber line (DSL) access multiplexers, including but not limited to the ability to terminate an End User Customer’s Copper Loop (which includes both a low-band voice channel and a high-band data channel, or solely a data channel); the ability to forward the voice channels, if present, to a circuit switch or multiple circuit switches; the ability to extract data units from the data channels on the loops; and the ability to combine data units from multiple loops onto one or more trunks connecting to a packet switch or packet switches.
Sample 1Sample 2Sample 3
Packet Switching or “Packet Switched”
Sample 1Sample 2Sample 3
Packet Switching as used herein means the routing or forwarding of packets, frames, cells, or other data units based on address or other routing information contained in the packets, frames, cells or other data units, and the functions that are performed by DSLAMS, including but not limited to the ability to terminate an end-user customer’s copper loop facility (which includes both a low-band voice channel and a high-band data channel, or solely a data channel); the ability to forward the voice channels, if present, to a circuit switch or multiple circuit switches; the ability to extract data units from the data channels on the loops; and the ability to combine data units from multiple loops onto one or more trunks connecting to a packet switch(es).
Sample 1Sample 2Sample 3

Examples of Packet Switching in a sentence

  • Packet Switching is defined as the basic packet switching function of routing or forwarding packets, frames, cells or other data units based on address or other routing information contained in the packets, frames, cells or other data units.

  • Customer must utilize MPLS L3 VPN (Multi Label Packet Switching Layer 3 Virtual Private Networking”) as a methodology to receive returned (Forwarded) post mitigation traffic.

  • Packet Switching is defined as the packet switching capability network element, as set forth in 47 C.F.R. 51.319.

  • The Packet Switching UNE is defined as the basic packet switching function of routing or forwarding packets, frames, cells or other data units based on address or other routing information contained in the packets, frames, cells or other data units, and the functions that are performed by the DSLAM.

  • Maintenance and Repair of unbundled Packet Switching are the sole responsibility of Qwest.

  • Packet Switching must be offered only in the limited circumstances described in 47 C.F.R. § 51.319(c)(3).

  • Unbundled Packet Switching includes use of a distribution Loop and virtual transport facilities as well as the DSLAM functionality with the routing and addressing functions of the Packet Switch necessary to generate the virtual channel.

  • Qwest shall provide CLEC with unbundled Packet Switching in a non-discriminatory manner according to the following terms and conditions.

  • Notwithstanding any other provision of the Agreement or any Verizon tariff or SGAT, ***CLEC Acronym TXT*** shall not be entitled to obtain access to the Packet Switching Capability of any Hybrid Loop on an unbundled basis.

  • DigiLine Service, when configured for Packet Switching, provides access to the Company's Public Packet Switched Network (PPSN)/2/.


More Definitions of Packet Switching

Packet Switching or “Packet Switched”. “Packet Switching” or “Packet Switched” refers to the routing or forwarding of packets, frames, cells, or other data units based on address or other routing information contained in the packets, frames, cells or other data units, and the functions that are performed by the digital subscriber line (DSL) access multiplexers, including but not limited to the ability to terminate an End User’s Copper Loop (which includes both a low-band voice channel and a high-band data channel, or solely a data channel); the ability to forward the voice channels, if present, to a circuit switch or multiple circuit switches; the ability to extract data units from the data channels on the loops; and the ability to combine data units from multiple loops onto one or more trunks connecting to a packet switch or packet switches.
Sample 1Sample 2Sample 3
Packet Switching has the meaning given in 47 C.F.R. § 51.319(a)(2)(i).
Sample 1
Packet Switching means controlling or routing the path of a digital transmission
Sample 1
Packet Switching is as defined in Attachment 2, Section 12.1 “Percent of Interstate Usage (PIU)” is defined as a factor to be applied to terminating access services minutes of use to obtain those minutes that should be rated as interstate access services minutes of use. The numerator includes all interstate “non-intermediary” minutes of use, including interstate minutes of use that are forwarded due to service provider number portability less any interstate minutes of use for Terminating Party Pays services, such as 800 Services. The denominator includes all “non-intermediary”, local , interstate, intrastate, toll and access minutes of use adjusted for service provider number portability less all minutes attributable to terminating Party pays services. “Percent Local Usage (PLU)” is defined as a factor to be applied to intrastate terminating minutes of use. The numerator shall include all “non-intermediary” local minutes of use adjusted for those minutes of use that only apply local due to Service Provider Number Portability. The denominator is the total intrastate minutes of use including local, intrastate toll, and access, adjusted for Service Provider Number Portability less intrastate terminating Party pays minutes of use. "Permanent Number Portability (PNP)" means the use of the long-term database method for number portability that complies with the performance criteria set forth in 47 CFR 52.23 (a).
Sample 1
Packet Switching. Intentionally Left Blank. is as defined in Attachment 2, Section 12.1 left blank.
Sample 1

Related to Packet Switching

  • Packet Switch is a router designed to read the destination address in an incoming cell or packet, consult a routing table and route the packet toward its destination. Packetizing is done in originating CPE and reassembly is done in terminating CPE. Multiple packet formats or protocols exist (e.g., x.25, x.75, frame relay, ATM, and IP).

  • Switch means a switching device employed by a Carrier within the Public Switched Network. Switch includes but is not limited to End Office Switches, Tandem Switches, Access Tandem Switches, Remote Switching Modules, and Packet Switches. Switches may be employed as a combination of End Office/Tandem Switches. "Switched Access Service" means the offering of transmission and switching services to Interexchange Carriers for the purpose of the origination or termination of telephone toll service. Switched Access Services include: Feature Group A, Feature Group B, Feature Group D, 8XX access, and 900 access and their successors or similar Switched Access Services. "Switched Access Traffic" is traffic that originates at one of the Party's End User Customers and terminates at an IXC Point of Presence, or originates at an IXC Point of Presence and terminates at one of the Party's End User Customers, whether or not the traffic transits the other Party's network.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • End Office Switches (“EOs”) are switches from which end user Telephone Exchange Services are directly connected and offered.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Signal means any transmission of radio frequency energy or of optical information.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Router means a modem or router provided by us for use by you in connection with the Broadband Service.

  • Customer-generator means a user of a net metering system.

  • PNode has the meaning set forth in the CAISO Tariff.

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.

  • Pupil Generated Content The term “pupil-generated content” means materials or content created by a pupil during and for the purpose of education including, but not limited to, essays, research reports, portfolios, creative writing, music or other audio files, photographs, videos, and account information that enables ongoing ownership of pupil content.

  • Modules means the Base Modules and Extended Modules.

  • Service Switching Point (SSP) means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.

  • Tandem Switch or “Tandem Office” or “Tandem” is a switching entity that has billing and recording capabilities and is used to connect and switch trunk circuits between and among End Office Switches and between and among End Office Switches and carriers’ aggregation points, points of termination, or points of presence, and to provide Switched Exchange Access Services.

  • End Office Switch or “End Office” means the switching machine that directly terminates traffic to and receives traffic from purchasers of local Exchange Services. An End Office Switch does not include a PBX.

  • SPID is the number that identifies a service provider to the relevant NPAC. The SPID may be a state-specific number. "Serving Wire Center" denotes the CenturyLink building from which dial tone for local Exchange Service would normally be provided to a particular End User Customer premises. "Signaling System 7" or "SS7" is an out-of-band signaling protocol consisting of four basic sub- protocols:

  • Network Load means the load that a Network Customer designates for Network Integration Transmission Service under Tariff, Part III. The Network Customer’s Network Load shall include all load (including losses, Non-Dispatched Charging Energy, and Load Serving Charging Energy) served by the output of any Network Resources designated by the Network Customer. A Network Customer may elect to designate less than its total load as Network Load but may not designate only part of the load at a discrete Point of Delivery. Where an Eligible Customer has elected not to designate a particular load at discrete points of delivery as Network Load, the Eligible Customer is responsible for making separate arrangements under Tariff, Part II for any Point-To-Point Transmission Service that may be necessary for such non-designated load. Network Load shall not include Dispatched Charging Energy.

  • Satellite means any satellite owned by the Issuer or any of its Restricted Subsidiaries and any satellite purchased by the Issuer or any of its Restricted Subsidiaries pursuant to the terms of a Satellite Purchase Agreement, whether such satellite is in the process of manufacture, has been delivered for launch or is in orbit (whether or not in operational service).

  • Machine gun means any firearm known as a machine gun,

  • Customer Content means any content that is uploaded onto the Services by Customer or otherwise used on or in connection with the Software.

  • User Generated Content means any content that originates from End Users in any format, including graphics, text, or voice content published through or as part of a Software Title.

  • Mobile Devices means tablets and smartphones running mobile operating systems (e.g., iOS, Blackberry OS, Android, or Windows Mobile operating systems). Laptops are not considered to be Mobile Devices.

  • Tandem Office Switch or “Tandem(s)” are used to connect and switch trunk circuits between and among other Central Office Switches. A Tandem Switch does not include a PBX.

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.