Room air conditioner means a factory-encased air conditioner that is designed
Room air conditioner means aconsumer product, other than a packaged terminal air conditioner, which is powered by a single phase electric current and which is an encased assembly designed as a unit for mounting in a window or through the wall for the purpose of providing delivery of conditioned air to an enclosed space. It includes a prime source of refrigeration and may include a means for ventilating and heating.
Room air conditioner means any electrical appliance that has a compressor, a condenser, an evaporator and a fan to cool and dehumidify the surrounding air and that is capable in ordinary usage of being mounted in a window or through a wall.
Examples of Room air conditioner in a sentence
UW shall follow competitive funding processes unless there are justifiable reasons for Urgent Sourcing of Funding as outlined in paragraph 7.2 below.
Red Room air conditioner needed some attention, need to try to source new control knobs.ADMINISTRATION BUILDING – Renovations are well under way with the builder having stripped old office partitions benches etc.
Room air conditioner units without louvered sides are also referred to as “through the wall” units.
Room air conditioner units without louvered sides are also referred to as “through the wall” (“TTW”) units.
The values have been determined using the same methodology as for refrigerator and clothes washers.Total Lifecycle Economic Assessment: New Room AC Electricity Cost($2000) Dollars per Cooling Capacity ($2000 per new room AC)2500 2000 1500 1000 500 01980 1990 1991 1992 1993 1994Production Year Figure 16 Room air conditioner: retrospective total life cycle costAccording to the above figure, between 1990 and 1994 the total financial cost has remained steady.
More Definitions of Room air conditioner
Room air conditioner means a factory-encased air conditioner that is designed (1) as a unit for mounting in a window, through a wall, or as a console, and (2) for delivery without ducts of conditioned air to an enclosed space.
Room air conditioner means an appliance as specified in the notification under clause (b) of section 14 of the Act;
Room air conditioner means a single-phase electric air-conditioner that has a cooling capacity of 10.55 kW (36 000 Btu/h) or less, but does not include a packaged terminal air-conditioner, a
Room air conditioner means a device:
Room air conditioner means a factory-encased air conditioner that is designed (1) as a unit for mounting in a window, through a wall, or as a console, and
Room air conditioner means a window-mounted or through-the-wall-mounted encased assembly, other than a ‘packaged terminal air conditioner,’ that delivers cooled, conditioned air to an enclosed space, and is powered by single-phase electric current. It includes a source of refrigeration and may include additional means for ventilating and heating, notwithstanding ASHRAE 16 and RAC-1 (incorporated by reference; see § 430. 3).” AHAM supported DOE’s proposed amendments to the definition of room air conditioner which are consistent, though not verbatim, with the definitions in AHAMRAC-1-2020. (AHAM, No. 13 at p. 6)9 DOE did not receive any comment in opposition to the proposed definition. For the reasons provided in the June 2020 NOPR, DOE adopts the definition of “room air conditioner” as proposed. In the June 2020 NOPR, DOE also proposed to further specify the scope of coverage of appendix F by adding a new “Scope” section stating that appendix F contains the test requirements used to measure the energy performance of room ACs. In doing so, DOE would explicitly limit the scope of products tested in accordance with appendix F, and appendix F would be consistent with test procedures for other similar covered products in that it would include an introductory statement of scope. There were no comments pertaining to this addition. DOE adds this new provision to appendix F as proposed. B. Industry Test Standards The DOE room AC test procedure in appendix F references the following two industry standards as the basis of the cooling mode test: ANSI/AHAM RAC-1-2008 and ANSI/ASHRAE Standard 16-2009. ANSI/AHAM RAC-1-2008 provides the specific test conditions and associated tolerances, while ANSI/ASHRAE Standard 16-2009 describes the test setup, instrumentation and procedures used in the DOE test procedure. The cooling capacity, efficiency metric, and other indicators are calculated based on the results obtained through the application of these test methods, as described in appendix F and 10 CFR 430.23(f). 9 A notation in the form “AHAM, No. 13 at p. 6” identifies a written comment: (1) made by the Association of Home Appliance Manufacturers; (2) recorded in document number 13 that is filed in the docket of this test procedure rulemaking (Docket No. EERE-2017-BT-TP-0012-0008) and available for review at http:// www.regulations.gov; and (3) which appears on page 6 of document number 13.Updated versions of AHAM RAC-1 and ANSI/ASHRAE Standard 16 have been released since the publication of the p...
Room air conditioner means an encased assembly designed as a unit for mounting in a window or through a wall for the purpose of providing delivery of conditioned air to an enclosed space. It includes a primary source of refrigeration and may include a means for ventilation and heating.”