Tier 1 system definition

Tier 1 system means a gravity-fed graywater system that does not include any surge tank, pretreatment, or pressurized components. A Tier 1 system may be appropriate for retrofit situations. A Tier 1 system is intended to be simple to operate and can be easily disconnected during winter months or other periods when the system may not be in use.
Sample 1Sample 2Sample 3
Tier 1 system means the Tier 1 System Resources and Designated System Obligations
Sample 1Sample 2Sample 3
Tier 1 system means the specific collection of resources
Sample 1Sample 2Sample 3

Examples of Tier 1 system in a sentence

  • Pursuant to applicable law, Tier 1 system members are eligible for full service credit for the pay period in which VTO is used and the employer contribution would be based on the employees’ normal compensation earnable.

  • The Tier 2 system provides additional connectivity to the Tier 1 system, it allows for direct access to more locations and increased traffic volume capacity.

  • The costs of the Tier 1 system are allocated on the basis of equal cost per share of system capability.

  • Section 5 and Exhibit C of the Settlement‌ Section 5 and Exhibit C of the Settlement address how possible future environmental attributes associated with the Tier 1 system resources would be shared with the IOUs. Settlement, REP-12-A-02A, § 5, Exhibit C.

  • Transferable RECs are RECs that may in the future accrue to the Tier 1 system resources.

  • A customer's preliminary Slice Percentage was based on a forecast of the customer's FY 2012 Net Requirement load divided by an augmented Tier 1 system capability (up to 7400 aMWs).

  • The CHWM for each customer was calculated by BPA in FY 2011 based on the24 expected output of Tier 1 system resources during FY 2012–2013 and customers’ actual25 FY 2010 loads.

  • The Slice product is a power sale subject to limitations and is not a sale of operational rights, Tier 1 system resources, resource capability, or transfer of control of any Federal resources.

  • Bonneville uses the system firm critical-period output plus any rate-period augmentation to establish Tier 1 system capability in each rate period.

  • In terms of industry, the Canadian aerospace companies can be broadly classified into four categories: OEM, Tier 1 (system integrators), Tier 2 (equipment integrators), and Tier 3 (suppliers).


More Definitions of Tier 1 system

Tier 1 system means the specific collection of resources and contract purchases that are designated for contract sales by the Bonneville power administration under the tiered rate methodology.
Sample 1Sample 2

Related to Tier 1 system

  • Tier 1 Help Desk means Customer's point of contact(s) to provide all Tier 1 Support within Customer's organization(s).

  • Tier 1 Support means the Technical Support provided by the Tier 1 Help Desk.

  • 911 system means the set of network, database and customer premise equipment (CPE) components required to provide 911 service.

  • Tier 1 means the portion of the design-related information contained in the generic DCD that is approved and certified by this appendix (Tier 1 information). The design descriptions, interface requirements, and site parameters are derived from Tier 2 information. Tier 1 information includes:

  • SDX System means the system used by NERC to exchange system data.

  • Analytical x-ray system means a group of components utilizing x-rays to determine the elemental composition or to examine the microstructure of materials.

  • TARGET2 System means the Trans-European Automated Real-Time Gross Settlement Express Transfer (TARGET2) system or any successor thereto.

  • Tier 2 means the portion of the design- related information contained in the generic DCD that is approved but not certified by this appendix (Tier 2 information). Compli- ance with Tier 2 is required, but generic changes to and plant-specific departures from Tier 2 are governed by Section VIII of this appendix. Compliance with Tier 2 pro- vides a sufficient, but not the only accept- able, method for complying with Tier 1. Compliance methods differing from Tier 2 must satisfy the change process in Section VIII of this appendix. Regardless of these dif- ferences, an applicant or licensee must meet the requirement in Section III.B of this ap- pendix to reference Tier 2 when referencing Tier 1. Tier 2 information includes:

  • X-ray system means an assemblage of components for the controlled production of x-rays. It includes minimally an x-ray high-voltage generator, an x-ray control, a tube housing assembly, a beam-limiting device, and the necessary supporting structures. Additional components which function with the system are considered integral parts of the system.

  • Diagnostic x-ray system means an x-ray system designed for irradiation of any part of the human or animal body for the purpose of diagnosis or visualization.

  • General purpose radiographic x-ray system means any radiographic x-ray system which, by design, is not limited to radiographic examination of specific anatomical regions.

  • New tank system means a tank system that will be used to contain an accumulation of regulated substances and for which installation has commenced after January 14, 1987. (See also “Existing Tank System.”)

  • System Impact Study means an assessment by the Transmission Provider of (i) the adequacy of the Transmission System to accommodate a Completed Application, an Interconnection Request or an Upgrade Request, (ii) whether any additional costs may be incurred in order to provide such transmission service or to accommodate an Interconnection Request, and (iii) with respect to an Interconnection Request, an estimated date that an Interconnection Customer’s Customer Facility can be interconnected with the Transmission System and an estimate of the Interconnection Customer’s cost responsibility for the interconnection; and (iv) with respect to an Upgrade Request, the estimated cost of the requested system upgrades or expansion, or of the cost of the system upgrades or expansion, necessary to provide the requested incremental rights. System Protection Facilities: “System Protection Facilities” shall refer to the equipment required to protect (i) the Transmission System, other delivery systems and/or other generating systems connected to the Transmission System from faults or other electrical disturbance occurring at or on the Customer Facility, and (ii) the Customer Facility from faults or other electrical system disturbance occurring on the Transmission System or on other delivery systems and/or other generating systems to which the Transmission System is directly or indirectly connected. System Protection Facilities shall include such protective and regulating devices as are identified in the Applicable Technical Requirements and Standards or that are required by Applicable Laws and Regulations or other Applicable Standards, or as are otherwise necessary to protect personnel and equipment and to minimize deleterious effects to the Transmission System arising from the Customer Facility. Transmission Facilities:

  • Tier 1 Capital means Tier 1 Capital for the purposes of the Capital Regulations;

  • Delivery System means the design and construction

  • E-Verify system means an Internet-based system operated by the United States Department of Homeland Security that allows participating employers to electronically verify the employment eligibility of newly hired employees; and

  • Tier 2 Support means the Esri Technical Support provided to the Tier 1 Help Desk when a Case cannot be resolved through Tier 1 Support.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Multiple Exchange Carrier Access Billing or “MECAB” means the document prepared by the Billing Committee of the OBF, which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The MECAB document, published by ATIS as ATIS/OBF-MECAB- Issue 6, February 1998, contains the recommended guidelines for the billing of access services provided to an IXC by two (2) or more LECs, or by one LEC in two (2) or more states within a single LATA.