Verification Operation definition

Verification Operation means a period of maximum 2 months after Installation of System on Production platform during which the properties of the System with Hardware are verified and functionality of the System is tested in non – public area with data from Production AODB data.
Sample 1Sample 2
Verification Operation means the time period of ten Business Days from the Contractor's request during which the properties of the supplied Ordered Work are checked and its functionality is tested according to the delivered Documents on the Test Platform, in the Customer's technical conditions and with with datas from Production AODB.
Sample 1
Verification Operation means a period of fourteen (14) Calendar Days after the completion of each stage according to Annex 3 to hereto, unless otherwise agreed between the Parties, after completion of the Installation of each stage according to Annex 3 hereto and Integration and at the request of the Contractor, during which (i) testing of the delivered Hardware and Software scheduled for the stage in accordance with Annex 3 hereto (ii) verifying the performance of the delivered Performance in accordance with the submitted Documentation; and (iii) ) testing the functionality of the delivered Performance will be performed. Within the scope of the Verification Operation, the Client is entitled to verify the compliance of the delivered Performance with the safety requirements specified in Annex 4 to this Contract.
Sample 1

Examples of Verification Operation in a sentence

  • IDT and Integrity and Verification Operation (IVO) Performance Report (Dec.

  • UNCTAD is implementing the project in three ECCAS countries: Chad, the Congo and Equatorial Guinea.

  • After successful Verification Operation, the Parties will mutually agree on the End User Workplaces Installation Schedule (hereinafter referred to as “EUW Installation Schedule”) stating the schedule of replacement of the current EUW by Suppliers Hardware.

  • The Field Verification Operation Control System accepted an address coded as R (i.e. no update to the Master Address File) as the final field action for a record only if both the production Lister and the Quality Control Lister actions on the address listing pages were blank.

  • User Environment of Type IThe following scenario explains how Type I devices perform Identity Verification Operation in the environment shown in Figure 3.

  • For Verification Operation, Penetration Test, Pilot Operation and Handover Protocol in respect to Ordered Work, the provisions of articles IV – VIII hereof shall apply accordingly, unless mutually expressly agreed otherwise.

  • OT.Cert_UpdateAt each Identity Verification Operation, the TOE shall control the validity of the Secure Messaging and Role Card Verifiable Certificates of the SAM.

  • For Verification Operation, Penetration Test, Pilot Operation and Handover Protocol in respect to Ordered Work, the provisions of articles IV.

  • In the event that the report on performed Verification Operation indicates that the Work does not meet the criteria stipulated in Art.

  • The Scottish and UK Governments are in discussions about a review of the UK levy and its implications for the timing of the devolution of the tax.5 3 Official Report, Finance and Constitution Committee, Scottish Parliament, 2 October 2019.4 Third Annual Report on the Implementation of the Scotland Act 2016 Scottish Government, 2019.5 Third Annual Report on the Implementation of the Scotland Act 2016 Scottish Government, 2019.


More Definitions of Verification Operation

Verification Operation means a period of maximum two (2) months after Installation, Integration and Implementation of the XXXXX/CUSS core System and at least one (1) dedicated End User Workplace and at least one (1) CUSS kiosk, during which the properties of the System with Hardware will be verified and functionality of the System and individual airline applications listed in Annex No.7 will be tested. Verification Operation will run simultaneously and shall not interfere with current system operation. Part of the Verification operation will be also testing of compliance with the CIS hardening politics, as stated in Annex No. 2. Additional expressions may be defined directly in the text of the Agreement, in which case the definition is in bold letters and introduced by words “hereinafter referred to as” and upon each next occurrence in the text of the Agreement the expression is written with capital initial letters. Expressions in singular include the plural as well and vice versa, expressions referring to persons include both natural as well as legal persons.
Sample 1
Verification Operation means a period of fourteen (14) days from the Contractor’s invitation, during which the Ordered Performance is tested and the properties of the Software are verified with actual data and testing its functionality described in the Documentation, in accordance with the Art. IV.5 hereof.
Sample 1

Related to Verification Operation

  • In operation means engaged in activity related to the primary design function of the source.

  • Verification means the process of comparing sets of data to establish the validity of a claimed identity (one-to-one check);

  • Production Operations means all operations conducted for the purpose of producing Petroleum from the Development Area after the commencement of production from the Development Area including the operation and maintenance of all necessary facilities therefor.

  • Verification Report As defined in Section 4.19.

  • Generation Operations Center means the location of Buyer’s real-time operations personnel.

  • Independent Verification means that an evaluation is undertaken and reported by an individual or body whose organisation, systems and procedures conform to ISO Guide 65:1996 (EN 45011:1998) General requirements for bodies operating product certification systems (as amended form time to time) or equivalent, and who is accredited to audit against forest management standards by a body whose organisation, systems and procedures conform to ISO 17011: 2004 General Requirements for Providing Assessment and Accreditation of Conformity Assessment Bodies (as amended from time to time) or equivalent.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Normal operation means all periods of operation except start-up and shutdown operations and maintenance of equipment;

  • Farm operation means any activity conducted solely or primarily for the production of one or more agricultural products or commodities, including timber, for sale or home use, and customarily producing such products or commodities in sufficient quantity to be capable of contributing materially to the operator's support.

  • Commercial Operation means the condition of operation in which the complete equipment covered under the Contract is officially declared by the Owner to be available for continuous operation at different loads up to and including rated capacity. Such declaration by the Owner, however, shall not relieve or prejudice the Contractor of any of his obligations under the Contract.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Exploration Operations means operations conducted in the Contract Area pursuant to this Contract in searching for Petroleum and in the course of an Appraisal Programme and shall include but not be limited to aerial, geological, geophysical, geochemical, palaeontological, palynological, topographical and seismic surveys, analysis, studies and their interpretation, investigations relating to the subsurface geology including structural test drilling, stratigraphic test drilling, drilling of Exploration Xxxxx and Appraisal Xxxxx and other related activities such as surveying, drill site preparation and all work necessarily connected therewith that is conducted in connection with Petroleum exploration.

  • Verification system means the system maintained by the department under section 19-24.1-31 for verification of registry identification cards.

  • Salvage operation means any business, trade or industry engaged in whole or in part in salvaging or reclaiming any product or material, including but not limited to metals, chemicals, shipping containers or drums.

  • Commencement of Operations means, with respect to any Facility, the completion and the performance of all of the following activities:

  • Busy Line Verification (BLV) means a service whereby an End User requests an operator to confirm the busy status of a line.

  • Farming operation means raising, cultivating, propagating, fattening, grazing, or any other farming, livestock, or aquacultural operation.

  • Root Cause Analysis Report means a report addressing a problem or non-conformance, in order to get to the ‘root cause’ of the problem, which thereby assists in correcting or eliminating the cause, and prevent the problem from recurring.

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.

  • Commercial Operations Upon satisfaction of the following conditions, the Facility shall be considered to have achieved Commercial Operations on the Day specified in Seller's written notice described below: (i) the Acceptance Test has been passed, (ii) all generating units have passed Control System Acceptance Tests, (iii) the Transfer Date has occurred, (iv) Seller has (1) provided to Company the Required Models (as defined in Section 6(a) (Seller's Obligation to Provide Models) of Attachment B (Facility Owned by Seller)) in the form of Source Code, (2) placed the current version of the Source Code for the Required Models with the Source Code Escrow Agent as required in Section 6(b)(i)(A) (Establishment of Source Code Escrow) of Attachment B (Facility Owned by Seller), or (3) if Seller is unable to arrange for the placement of the appropriate Source Code into the Source Code Escrow account, placed the required funds with the Monetary Escrow Agent as required in Section 6(b)(ii)(A) (Establishment of Monetary Escrow) of Attachment B (Facility Owned by Seller), and (v) Seller provides Company with written notice that (aa) Seller is ready to declare the Commercial Operations Date and (bb) the Commercial Operations Date will occur within 24 hours (i.e., the next Day).

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Operations Manager means each of the Company and Provider payroll, benefits and information technology representatives on the Operations Management Team as identified in Section 6.0 below.

  • railway operational procedures means procedures specified under any access agreement (as defined in the Railways Act 1993) or station lease;

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Final Completion means the date determined and certified by A/E and Owner on which the Work is fully and satisfactorily complete in accordance with the Contract.

  • Commence commercial operation means, with regard to a unit that serves a generator, to have begun to produce steam, gas, or other heated medium used to generate electricity for sale or use, including test generation subject to the following: