Actuation Sample Clauses

Actuation. Service brakes shall be controlled and actuated by a compressed air system. The total braking effort shall be distributed between all wheels in such a ratio as to ensure equal friction material wear rate at all wheel locations A microprocessor controlled ABS (Anti-Lock Braking System) shall be provided. The ABS microprocessor shall be isolated protected from voltage spikes. The microprocessor for the ABS system shall be protected yet in an accessible location to allow for ease of service. Automatic actuation of the ABS shall override the operation of the brake retarder. Slack adjusters shall be fitted with an electronic display in the operator’s area and shall allow operators and maintenance personnel to easily identify when the brakes are not in correct adjustment. Brake chamber shafts shall be booted to protect the internal components from corrosion from water, salts and other corrosive agents commonly used on roads and highways.
Sample 1
AutoNDA by SimpleDocs
Actuation. ‌ No additional information on how the system is actuated will be provided, since the actuation of the transportation chain is operator controlled and the operator will have better knowledge of the position of virtual batches so that the product quality shipped to customers could be improved. Moreover, this WP will focus in the evaluation of the novel embedded in the flow XXX sensors, on traceability and in situ measurements of the flow behaviour in the aforementioned processes.
Sample 1

Related to Actuation

  • TRENCH SHORING If this Contract is in excess of $25,000 and is for the excavation of any trench deeper than five (5) feet, Contractor must submit and obtain District’s approval and acceptance, in advance of excavation, of a detailed plan showing the design of shoring, bracing, sloping, or other provisions to be made for worker protection from the hazard of caving ground during the excavation of such trench or trenches. If the plan varies from the shoring system standards, the plan shall be prepared by a registered civil or structural engineer.

  • Induction The Employer shall provide a copy of this agreement to newly hired employees within the first thirty (30) days of employment and shall introduce newly hired employees to a Union Shop Xxxxxxx in the workplace. The Shop Xxxxxxx will be given an opportunity, not to exceed fifteen (15) minutes, to talk to the new employee. The new employee and the Shop Xxxxxxx will not have wages or benefits deducted during this time.

  • Provisioning Line Splitting and Splitter Space 3.8.1 The Data LEC, Voice CLEC or BellSouth may provide the splitter. When EZ Phone or its authorized agent owns the splitter, Line Splitting requires the following: a non-designed analog Loop from the serving wire center to the NID at the End User’s location; a collocation cross connection connecting the Loop to the collocation space; a second collocation cross connection from the collocation space connected to a voice port; the high frequency spectrum line activation, and a splitter. The Loop and port cannot be a Loop and port combination (i.e. UNE-P), but must be individual stand-alone Network Elements. When BellSouth owns the splitter, Line Splitting requires the following: a non designed analog Loop from the serving wire center to the NID at the End User’s location with CFA and splitter port assignments, and a collocation cross connection from the collocation space connected to a voice port.

  • Maintenance – Line Splitting 3.6.1 BellSouth will be responsible for repairing voice troubles and the troubles with the physical loop between the NID at the End User’s premises and the termination point.

  • Signaling Each Party will provide the other Party with access to its databases and associated signaling necessary for the routing and completion of the other Party’s traffic in accordance with the provisions contained in the Unbundled Network Element Attachment or applicable access tariff.

  • Line Splitting 3.7.1 Line splitting allows a provider of data services (a Data LEC) and a provider of voice services (a Voice CLEC) to deliver voice and data service to End Users over the same Loop. The Voice CLEC and Data LEC may be the same or different carriers.

  • Construction Sequencing In general, the sequence of the proposed dates of Initial Operation of Interconnection Customers seeking interconnection to the Transmission System will determine the sequence of construction of Network Upgrades.

  • Staging In addition to the staging categories listed in paragraph 1 of Annex 2-A, this Schedule contains staging categories 20-A, 20-B, PR-1 and PR-130:

  • Signaling Parameters All SS7 signaling parameters will be provided in conjunction with traffic exchange trunk groups, where and as available. These parameters include Automatic Number Identification ("ANI"), Calling Party Number ("CPN"), Privacy Indicator, calling party category information, originating line information, charge number, etc. Also included are all parameters relating to network signaling information, such as Carrier Information Parameter ("CIP"), wherever such information is needed for call routing or billing. GTE will provide SS7 via GR-394-SS7 and/or GR-317-SS7 format(s).

  • Mutation At its own costs and expenses and within 3 (three) months from the Possession Date, have all Rates & Taxes in respect of the Composite Unit with all the concerned authorities separately assessed by having it mutated, separated or otherwise in its name and, until then, pay the proportionate Rates & Taxes in the manner elaborated in Schedule-G.

Time is Money Join Law Insider Premium to draft better contracts faster.