Alterations, Modifications, etc Sample Clauses

Alterations, Modifications, etc. In case the Mortgaged Property, or any item of equipment, part or appliance therein (each, a "Part") is required to be altered, added to, replaced or modified in order to comply with any Requirements of Law (a "Required Alteration") pursuant to SECTIONS 3.1 or 3.3 hereof, Borrower agrees to make such Required Alteration at its own expense. Borrower shall have the right to make any modification, alteration or improvement to the Mortgaged Property (herein referred to as a "Permitted Modification"), or to remove any Part which has become worn out, broken or obsolete, provided in each case that Borrower continues to be in compliance with SECTIONS 3.1 and 3.3 hereof and that such action will not, in Borrower's reasonable judgment, materially decrease the economic value of the Mortgaged Property or impair its originally intended use or function or decrease its economic useful life and in any event, will not decrease the Fair Market Value of the Mortgaged Property throughout the Loan Term and at the end of the Loan Term to less than 2 times the Loan Balance. In the event any Permitted Modification (i) is readily removable without impairing the value or use which the Mortgaged Property would have had at such time had such Part not been affixed or placed to or on such Mortgaged Property (a "Removable Part"), (ii) is not a Required Alteration and (iii) is not a Part which replaces any Part originally incorporated or installed in or attached to such Mortgaged Property on the date on which such Mortgaged Property became subject to the Deed of Trust, or any Part in replacement of or substitution for any such original Part (each an "Original Part"), any such Permitted Modification, if no Event of Default is Giant Yorktown, Inc. Loan Agreement continuing, shall be and remain the property of Borrower that is not subject to the Lien of the Deed of Trust and may be removed by Borrower (a "Borrower Part"). To the extent such Permitted Modification is not a Removable Part, or is a Required Alteration or an Original Part, and, to the extent a Removable Part is not the property of Borrower that is not subject to the Lien of the Deed of Trust because of the continuance of an Event of Default, the same shall immediately and automatically be and become subject to the Lien of the Deed of Trust. Any Required Alterations, and any Parts installed or replacements made by Borrower upon any Mortgaged Property pursuant to its obligation to maintain and keep the Mortgaged Property in good ...
Sample 1See All (7)
AutoNDA by SimpleDocs
Alterations, Modifications, etc. (a) In case any System, item of Equipment, or any component, part or appliance therein (each, a "PART") is required to be altered, added to, replaced or modified in order to comply with any Applicable Laws (a "REQUIRED ALTERATION") pursuant to SECTIONS 5.1 or 5.3 hereof, Lessee agrees to make or cause to be made such Required Alteration at its own expense. Lessee, directly or through any applicable Sublessee, shall have the right to make any modification, alteration or improvement to any System or item of Equipment (herein referred to as a "PERMITTED MODIFICATION"), or to remove any Part which has become worn out, broken or obsolete, PROVIDED in each case that Lessee continues to be in compliance with SECTIONS 5.1 and 5.3 hereof, that no Default or Event of Default then exists and that any such Permitted Modification (a) will not decrease the economic value of the applicable System or item of Equipment or impair its originally intended use or function or decrease its economic useful life and (b) will not cause such System or item of Equipment to become suitable for use only by Lessee. In the event any Permitted Modification (i) is readily removable without impairing the value or use which the System or item of Equipment would have had at such time had such Part not been affixed or placed to or made a component of such System or item of Equipment (a "REMOVABLE PART"), (ii) is not a Required Alteration and (iii) is not a Part which replaces any Part originally incorporated or installed in or attached to or made a component of such System or item of Equipment with a value in excess of $250,000 on the date on which such System or item of Equipment became subject to this Lease, or any Part in replacement of or substitution for any such original Part (each an "ORIGINAL PART"), any such Permitted Modification, if no Default or Event of Default is continuing, shall be and remain the property of Lessee. To the extent such Permitted Modification is not a Removable Part, or is a Required Alteration or an Original Part, the same shall immediately and automatically be and become the property of Trustee, for the benefit of the Certificate Purchasers, and subject to the terms of this Lease. Any Required Alterations, and any Parts installed or replacements made by Lessee upon any System or item of Equipment pursuant to its obligation to maintain and keep the Equipment in good order, operating condition and repair under SECTION 5.3 (collectively, "REPLACEMENT PARTS") and a...
Sample 1

Related to Alterations, Modifications, etc

  • Modifications, etc Any renewal, extension, modification, increase, decrease, alteration, rearrangement, exchange or reissuance of all or any part of the Liabilities or the Credit Agreement or any instrument executed in connection therewith, or any contract or understanding between Borrower and any of the Lenders, or any other Person, pertaining to the Liabilities;

  • Alterations, Modifications and Additions The Grantor will make (or cause to be made) such alterations and modifications in and additions to such Airframe and each such Engine as may be required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which such Aircraft may then be registered; provided that the Grantor may, in good faith, contest the validity or application of any such requirement in any manner that does not involve any material risk of sale, loss or forfeiture of such Aircraft and does not adversely affect the Trustee’s interest in the Aircraft Collateral. In addition, the Grantor (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to such Airframe or any such Engine as the Grantor may deem desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts, provided that no such alteration, modification or addition shall materially diminish the value or utility of such Airframe or such Engine below its value or utility, immediately prior to such alteration, modification or addition, assuming that such Airframe or such Engine was then in the condition required to be maintained by the terms of this Aircraft Security Agreement, except that the value (but not the utility) of such Airframe or such Engine may be reduced by the value of any such Parts that shall have been removed that the Grantor deems obsolete or no longer suitable or appropriate for use on such Airframe or such Engine. All Parts incorporated or installed in or attached or added to such Airframe or any such Engine as the result of such alteration, modification or addition shall be free and clear of any Liens, other than Permitted Liens, and shall, without further act, be subject to the Lien of this Aircraft Security Agreement. Notwithstanding the foregoing, the Grantor (or any Permitted Lessee) may, at any time, remove any Part from such Airframe or any such Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to such Airframe or such Engine at the time of delivery thereof to the Grantor or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to such Airframe or such Engine pursuant to the first sentence of this Section 6.03(c) or Section 6.01(d) and (iii) can be removed from such Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Aircraft Security Agreement that such Airframe or such Engine would have had had such Part never been installed on such Airframe or such Engine. Upon the removal by the Grantor of any Part as permitted by this Section 6.03(c), such removed Part shall, without further act, be free and clear of the Lien of this Aircraft Security Agreement and of all rights and interests of the Trustee (and the other beneficiaries hereof) and shall no longer be deemed a Part hereunder. Upon request of the Grantor from time to time, the Trustee shall execute and deliver to the Grantor an appropriate instrument confirming the release of any such removed Part from the Lien of this Aircraft Security Agreement.

  • Amendments, Modifications, etc This Agreement may not be amended or modified except by an agreement in writing executed by Exchangeco, Patch and the Trustee and approved by the Shareholders in accordance with section 11.2 of the Exchangeable Share Provisions.

  • ALTERATIONS - ADDITIONS The LESSEE shall not make structural alterations or additions to the leased premises, but may make non-structural alterations provided the LESSOR consents thereto in writing, which consent shall not be unreasonably withheld or delayed. All such allowed alterations shall be at LESSEE's expense and shall be in quality at least equal to the present construction. LESSEE shall not permit any mechanics' liens, or similar liens, to remain upon the leased premises for labor and material furnished to LESSEE or claimed to have been furnished to LESSEE in connection with work of any character performed or claimed to have been performed at the direction of LESSEE and shall cause any such lien to be released of record forthwith without cost to LESSOR. Any alterations or improvements made by the LESSEE shall become the property of the LESSOR at the termination of occupancy as provided herein.

  • Software Modifications Company may request that BNYM, at Company’s expense, develop modifications to the software constituting a part of the Licensed System that BNYM generally makes available to customers for modification (“Software”) that are required to adapt the Software for Company’s unique business requirements. Such requests, containing the material features and functionalities of all such modifications in reasonable detail, will be submitted by Company in writing to BNYM in accordance with the applicable, commercially reasonable procedures maintained by BNYM at the time of the request. Company shall be solely responsible for preparing, reviewing and verifying the accuracy and completeness of the business specifications and requirements relied upon by BNYM to estimate, design and develop such modifications to the Software. BNYM shall have no obligation to develop modifications to the Licensed System requested by Company, but may in its discretion agree to develop requested modifications which it, in its sole discretion, reasonably determines it can accomplish with existing resources or with readily obtainable resources without disruption of normal business operations provided Company agrees at such time in writing to pay all costs and expenses, including out-of-pocket expenses, associated with the customized modification. BNYM shall be obligated to develop modifications under this Section 2.16 only upon the execution of and in accordance with a writing containing, to BNYM’s reasonable satisfaction, all necessary business and technical terms, specifications and requirements for the modification as determined by BNYM in its sole judgment (“Customization Order”) and Company’s agreement to pay all costs and expenses, including out-of-pocket expenses, associated with the customized modification (“Customization Fee Agreement”). All modifications developed and incorporated into the Licensed System pursuant to a Customization Order are referred to herein as “Company Modifications”. BNYM may make Company Modifications available to all users of the Licensed System, including BNYM, at any time after implementation of the particular Company Modification and any entitlement of Company to reimbursement on account of such action must be contained in the Customization Fee Agreement.

  • Amendments; Waivers; Modifications, etc This Agreement and the provisions hereof may not be amended, waived, modified, changed, discharged or terminated except as set forth in Section 11.01 of the Credit Agreement.

  • Alterations For purposes of this Lease, any physical improvement addition, enhancement or change with respect to all or any portion of the Premises is referred to as an "Alteration." Tenant or Franchisor shall have the right at any time and from time to time during the Term to make or cause to be made any Alteration in or to the Premises (i) without Landlord's consent, if such Alteration is performed in order to comply with any of Tenant's agreements with Franchisor and such Alteration does not adversely affect any structural component of the Building and (ii) in the case of any Alteration other than those permitted under clause (i) above, with Landlord's prior consent, which consent shall not be unreasonably withheld provided that such Alteration does not (A) diminish the value of the Premises (including, by way of example only, but without limitation, by diminishing the utility of the Improvements for use as a restaurant or diminishing the useful life of the Improvements), except to a de minimis extent, or (B) adversely affect any structural component of the Building. Every Alteration shall be made in accordance with all applicable laws, legal requirements and the Permitted Encumbrances. If Tenant shall submit a request to Landlord for Landlord's approval of an Alteration which requires Landlord's approval, Landlord shall (x) approve such Alteration proposed by Tenant within twenty-one (21) days of receiving Tenant's proposal and request for approval or (y) disapprove Tenant's proposal in writing with a detailed explanation of its objections within twenty-one (21) days of receiving Tenant's proposal and request for approval. If Tenant submits a proposal to Landlord and Landlord disapproves such proposal within the twenty-one (21) day time period, Tenant may submit another proposal with modifications thereto made in response to Landlord's objections and Landlord shall so approve or disapprove same within seven (7) days after submission of such modified proposal. If Landlord does not approve or disapprove any proposal or modified proposal in writing with a detailed explanation of its objections within the applicable seven (1) or twenty-one (21) day period, Tenant may submit to Landlord a reminder notice, which shall state that Landlord's failure to disapprove the applicable proposal within seven (7) days after receipt of such reminder notice shall be deemed to constitute Landlord's approval thereof. If Landlord does not disapprove such proposal or modified proposal in writing with a detailed explanation of Landlord's objections to Tenant's modifications within seven (7) days after receipt of Tenant's reminder notice, Landlord shall be deemed to have approved the Alterations proposed by Tenant.

  • Required Modifications 13 Section 9.2

  • Waiver; Modification Failure to insist upon strict compliance with any of the terms, covenants, or conditions hereof shall not be deemed a waiver of such term, covenant, or condition, nor shall any waiver or relinquishment of, or failure to insist upon strict compliance with, any right or power hereunder at any one or more times be deemed a waiver or relinquishment of such right or power at any other time or times. This Agreement shall not be modified in any respect except by a writing executed by each party hereto.

  • Alterations by Tenant Tenant shall not make any alterations, additions or improvements (“Alterations”) to the Premises without Landlord’s prior written consent, except for nonstructural Alterations that cost $5,000 or less and are not visible from the exterior of the Premises. All Alterations installed by Tenant shall be new or completely reconditioned. Landlord shall have the right to approve the contractor, the method of payment of the contractor, and the plans and specifications for all proposed Alterations. Tenant shall obtain Landlord’s consent to all proposed Alterations requiring Landlord’s consent prior to the commencement of any such Alterations. Tenant’s request for consent shall be accompanied by information identifying the contractor and method of payment and two (2) copies of the proposed plans and specifications. All Alterations of whatever kind and nature shall become at once a part of the realty and shall be surrendered with the Premises upon expiration or earlier termination of the Lease Term, unless Landlord requires Tenant to remove the same as provided in Article 20. If Tenant demolishes or removes any then-existing tenant improvements or other portions of the Premises or the Building (including without limitation any previously installed Alterations), Tenant shall promptly commence and diligently pursue to completion the Alterations then underway or shall otherwise restore the Premises and the Building to its condition and state of improvement prior to such demolition or removal. During the Lease Term, Tenant agrees to provide, at Tenant’s expense, a policy of insurance covering loss or damage to Alterations made by Tenant, in an amount adequate to repair or replace the same, naming Landlord as an additional insured. Provided, however, Tenant may install movable furniture, trade fixtures, machinery or equipment in conformance with applicable governmental rules or ordinances and remove the same upon expiration or earlier termination of this Lease as provided in Article 20.

Time is Money Join Law Insider Premium to draft better contracts faster.