Application for approval 3.1. The application for approval of a vehicle type with regard to the AEBS shall be submitted by the vehicle manufacturer or by his authorised representative. 3.2. It shall be accompanied by the documents mentioned below in triplicate: 3.2.1. A description of the vehicle type with regard to the items mentioned in paragraph 2.4., together with a documentation package which gives access to the basic design of the AEBS and the means by which it is linked to other vehicle systems or by which it directly controls output variables. The numbers and/or symbols identifying the vehicle type shall be specified. 3.3. A vehicle representative of the vehicle type to be approved shall be submitted to the Technical Service conducting the approval tests.
Application for Payment The form acceptable to Owner that is to be used by the Contractor during the course of the Work in requesting payment from the Owner and that is to be accompanied by such supporting documentation as is required by the Contract Documents.
Venue Limitation for TIPS Sales Vendor agrees that if any "Venue" provision is included in any TIPS Sale Agreement/contract between Vendor and a TIPS Member, that clause must provide that the "Venue" for any litigation or alternative dispute resolution shall be in the state and county where the TIPS Member operates unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing a “Venue” clause that conflicts with these terms is rendered void and unenforceable.
Notice, Application In the case of any Loan, the Administrative Agent shall have received a Notice of Borrowing and, in the case of any Issuance of any Letter of Credit, the Issuing Lender and the Administrative Agent shall have received an L/C Application or L/C Amendment Application, as required under Section 3.2.
Timing of Return or Disposition Data shall be returned or disposed of by the following date: As soon as commercially practicable By the following agreed upon date:
Application for Benefits Requests for short-term leaves shall be in writing, upon the appropriate form prescribed and provided by the District, and shall be filed with the unit member's supervisor and the appropriate manager five (5) days in advance of the intended leave (except in emergency situations), unless otherwise stated by the provisions of the specific leave.
Entitlements Upon Return to Work (a) An employee who returns to work after the expiration of maternity, parental, or pre-adoption leaves shall retain the seniority the employee had accumulated prior to commencing the leave and shall be credited with seniority for the period of time covered by the leave. (b) On return from maternity, parental, or pre-adoption leaves, an employee shall be placed in the employee's former position or in a position of equal rank and basic pay. (c) Notwithstanding Clauses 18.1(b) and 18.6, vacation entitlements and vacation pay shall continue to accrue while an employee is on leave pursuant to Clause 21.1 providing: (1) the employee returns to work for a period of not less than six months, and (2) the employee has not received parental allowance pursuant to 21.6; and (3) the employee was employed prior to March 28, 2001. Notwithstanding Clause 18.6(a) vacation earned pursuant to this clause may be carried over to the following year, or be paid out, at the employee's option. (d) Employees who are unable to complete the return to work period in (c) as a result of proceeding on maternity, parental or pre-adoption leave shall be credited with their earned vacation entitlements and vacation pay providing the employee returns to work for a period of not less than six months following the expiration of the subsequent maternity, parental or pre-adoption leave.
Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant. (a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III. (b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III. (c) Each application for a license under this Agreement shall include, at a minimum, the following information: (1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities; (2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route; (3) for poles, the proposed points of attachment; (4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building; (5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and (6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement. (d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information: (1) the number and types of cables, including the physical size (diameter) and weight (weight per foot); (2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and (3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system. (e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution. (f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route. (g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities. (h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.
Change in Form or Timing of Distributions All changes in the form or timing of distributions hereunder must comply with the following requirements. The changes: (a) may not accelerate the time or schedule of any distribution, except as provided in Section 409A of the Code and the regulations thereunder; (b) must, for benefits distributable under Sections 2.1, 2.2, 2.3 and 2.4, delay the commencement of distributions for a minimum of five (5) years from the date the first distribution was originally scheduled to be made; and (c) must take effect not less than twelve (12) months after the election is made.
Increased Costs and Reduction of Return (a) If any Lender determines that, due to either (i) the introduction of or any change in or in the interpretation of any law or regulation or (ii) the compliance by that Lender with any guideline or request from any central bank or other Governmental Authority (whether or not having the force of law), there shall be any increase in the cost to such Lender of agreeing to make or making, funding or maintaining any Offshore Rate Loan or participating in Letters of Credit, or, in the case of the Issuing Lender, any increase in the cost to the Issuing Lender of agreeing to issue, issuing or maintaining any Letter of Credit or of agreeing to make or making, funding or maintaining any unpaid drawing under any Letter of Credit, then the Company shall be liable for, and shall from time to time, upon demand (with a copy of such demand to be sent to the Administrative Agent), pay to the Administrative Agent for the account of such Lender, additional amounts as are sufficient to compensate such Lender for such increased costs. (b) If any Lender shall have determined that (i) the introduction of any Capital Adequacy Regulation, (ii) any change in any Capital Adequacy Regulation, (iii) any change in the interpretation or administration of any Capital Adequacy Regulation by any central bank or other Governmental Authority charged with the interpretation or administration thereof, or (iv) compliance by the Lender (or its Lending Office) or any corporation controlling the Lender with any Capital Adequacy Regulation, affects or would affect the amount of capital required or expected to be maintained by the Lender or any corporation controlling the Lender and (taking into consideration such Lender's or such corporation's policies with respect to capital adequacy and such Lender's desired return on capital) that the amount of such capital is increased as a consequence of its Commitments, loans, credits or obligations under this Agreement, then, upon demand of such Lender to the Company through the Administrative Agent, the Company shall pay to the Lender, from time to time as specified by the Lender, additional amounts sufficient to compensate the Lender (or such corporation) for such increase.
