CADD Deliverables Sample Clauses

CADD Deliverables. Engineering plans (drawings) shall be submitted in ‘.dgn’ format as produced by Bentley Systems Microstation product, and shall be in accordance with the applicable English NJDOT CADD STANDARDS MANUAL, as published on the Internet at the NJDOT Web page. This document may be downloaded. The Web page also contains custom portions of the NJDOT CADD system, which may be downloaded. The files will greatly facilitate the provision of CADD files by others in accordance with DOT standards. All support files will reside in the same directory (without subdirectories), and reference files shall be attached without device or directory specifications. Files shall be compressed using the Microstation “compress design” command before transfer to media, in order to remove deleted elements. All files (graphic and ASCII) necessary for accurate plan presentation shall be included. Hard copies of all electronic files and documentation shall be provided. Any submitted file that does not conform to the NJDOT CADD Standards will be returned for correction, without additional compensation or schedule allowance. All CADD design files provided to the Department shall be compatible with the latest version of CADD software in use by the Department. Automated translations from a different graphics format are often incomplete, and do not result in fully compatible graphics files. The consultant is responsible to ensure and verify that the required information has been translated correctly and completely for the intended purpose.
AutoNDA by SimpleDocs
CADD Deliverables. 1) Consultant must provide the number of hard copies and electronic copies as specified in the applicable Delivery Order. All deliverables must be accompanied with a single, consolidated digital version in PDF with the same content and in the same order as the hard copy. 2) Consultant must submit to the Board all working files (including, but not limited to, CADD, worksheets and BIM models) at the time of milestone(s) deliverables required by the Agreement and applicable Delivery Order. Construction Documents must be developed in accordance with the Board’s CADD/BIM Standards and transmitted electronically to the Board via solid-state storage device or the Consultant’s download web interface. Submittals will be accepted by the Board in a format approved by the Agreement and applicable Delivery Order. 3) Each drawing must indicate the Consultant's name, address, phone number, Consultant and Board Contract Number, Board Permit Number, Texas Department of Licensing and Regulation Architectural Barriers Project Registration Number, date or revision date, and scale, consistent with the title block specifications detailed in the CADD Standards. 4) All drawings and specifications must also be placed on the Board's specified document management system (i.
CADD Deliverables i) Consultant must provide the number of hard copies and electronic copies as specified in the applicable DO. All deliverables must be accompanied with a single, consolidated digital version in PDF with the same content and in the same order as the hard copy.
CADD Deliverables i) Consultant must provide the number of hard copies and electronic copies as specified in the applicable DO. All deliverables must be accompanied with a single, consolidated digital version in PDF with the same content and in the same order as the hard copy. ii) Consultant must submit to the Board all working files (including, but not limited to, CADD, worksheets and BIM models) at the time of milestone(s) deliverables required by the Agreement and applicable DO. Construction Documents must be developed in accordance with the Board’s CADD/BIM Standards and transmitted electronically to the Board. Submittals will be accepted by the Board in a format approved by the Agreement and applicable DO. iii) Each drawing must indicate the Consultant's name, address, phone number, Consultant and Board Contract Number, Board Permit Number, Texas Department of Licensing and Regulation Architectural Barriers Project Registration Number (if applicable), date or revision date, and scale, consistent with the title block specifications detailed in the CADD Standards. iv) All drawings and specifications must also be placed on the Board's specified document management system (i.e. Unifier etc.) on a regular basis. Monthly, Consultant must ensure all files on the specified document management system are the most current. Consultant will submit the CADD Deliverables to the Board. The Board will review and examine the files, and Consultant must correct any errors detected at no additional cost to the Board.

Related to CADD Deliverables

  • Tasks and Deliverables A description of and the schedule for each task and deliverable, illustrated by a Xxxxx chart. Start and completion dates for each task, milestone, and deliverable shall be indicated. Must include deliverables specified in SOW-RFP as well as other deliverables that may be proposed by Contractor.

  • Services and Deliverables The Services and the required Deliverables for the Services are specified below. Service Type Output Measure Quantity per annum Number of Service Users Funding amount per annum (excl. GST) $ $ $ Description of Services Funding amount one-off (excl. GST) $ Service Type Output Measure Quantity per annum Number of Service Users Funding amount (excl. GST) $ $ $ Description of Services Funding amount one-off (excl. GST) $

  • Project Deliverables The Contractor shall provide each of the following deliverables in writing to the City for review and approval to achieve the project objectives. C.1. <Title> Deliverable 1

  • Contract Deliverables The Contractor shall provide information technology staff augmentation services, including comprehensive management of staff, as set forth in this Contract. The term “staff” refers to the temporary staff provided by the Contractor to render information technology services identified by Customers, but that staff shall not be deemed an employee of the State or deemed to be entitled to any benefits associated with such employment. Contracts resulting from this solicitation should not be structured as fixed-price agreements or used for any services requiring authorization for payment of milestone tasks. Contractor shall only provide information technology staff augmentation services for those Job Titles awarded to the Contractor and shall be paid on an hourly basis. The Department’s intent is for Contractor’s information technology staff to provide services closely related to those described in the Job Family Descriptions document. Detailed scopes of work, specific requirements of the work to be performed, and any requirements of staff shall be provided by the Customer in a Request for Quote. The Contractor shall possess the professional and technical staff necessary to allocate, outsource, and manage qualified information technology staff to perform the services requested by the Customer. The Contractor shall provide Customers with staff who must have sufficient skill and experience to perform the services assigned to them. All of the information technology staff augmentation services to be furnished by the Contractor under the Contract shall meet the professional standards and quality that prevails among information technology professionals in the same discipline and of similar knowledge and skill engaged in related work throughout Florida under the same or similar circumstances. The Contractor shall provide, at its own expense, training necessary for keeping Contractor’s staff abreast of industry advances and for maintaining proficiency in equipment and systems that are available on the commercial market. The Contractor shall be responsible for the administration and maintenance of all employment and payroll records, payroll processing, remittance of payroll and taxes, and all administrative tasks required by state and federal law associated with payment of staff. The Contractor shall, at its own expense, be responsible for adhering to the Contract background screening requirements, testing, evaluations, advertising, recruitment, and disciplinary actions of Contractor’s information technology staff. The Contractor shall maintain during the term of the Contract all licenses, permits, qualifications, insurance and approvals of whatever nature that are legally required to perform the information technology staff augmentation services.

  • Deliverables Upon satisfactory completion of the work authorization, the Engineer shall submit the deliverables as specified in the executed work authorization to the State for review and acceptance.

  • Other Deliverables For any Deliverable that is not a System Deliverable, the applicable Work Order will set forth the acceptance criteria and other testing required for District to evaluate and accept (or, where necessary, reject) such Deliverable; provided, however, that in no case will a Deliverable be accepted by District until District has provided Contractor with District’s written acceptance thereof.

  • SERVICES & DELIVERABLES Seller agrees to perform the services ("Services") and/or provide the goods ("Goods", which term shall include goods provided as part of any Services), described in any PO, in accordance with the applicable PO and with this Agreement. Acceptance of a PO and this Agreement shall occur (i) within five (5) days of receipt by the Seller; or, (ii) upon shipment of Goods; or, (iii) upon commencement of a Service, (whichever is the earlier). Seller shall be bound by the provisions of this Agreement, including all provisions set forth on the face of any applicable PO, whether Seller acknowledges or otherwise signs this Agreement or the PO, unless Seller objects to such terms in writing within five (5) days of receiving the Agreement and/or the PO, prior to shipping Goods or prior to commencing Services. This writing does not constitute a firm offer and may be revoked at any time prior to acceptance. This Agreement may not be added to, modified, superseded, or otherwise altered, except by a writing signed by an authorized Apple representative and specifically stated to be an amendment of this Agreement. Any terms or conditions contained in any acknowledgment, invoice, or other communication of Seller which are inconsistent with the terms and conditions of this Agreement, are hereby rejected. To the extent that this Agreement might be treated as an acceptance of Seller's prior offer, such acceptance is expressly made on condition of assent by Seller to the terms hereof and shipment of the Goods or beginning performance of any Services by Seller shall constitute such acceptance. Apple hereby reserves the right to reschedule any delivery or cancel any PO issued at any time prior to shipment of the Goods or prior to commencement of any Services. Apple shall not be subject to any charges or other fees as a result of such cancellation.

  • SERVICE DELIVERABLES You will receive service on the Covered Product as described below: Carry-In: Unless otherwise provided in this Agreement, the Covered Product must be shipped or delivered and retrieved by You at Our authorized service center during normal business hours. In-Home/On-Site: Service will be performed in Your home or on-site as indicated on the Declarations Page of this Agreement, or on Your sales receipt or invoice provided You have fulfilled the following requirements: (1) provide Our authorized technician with accessibility to the Covered Product; (2) provide a non-threatening and safe environment for Our authorized technician; and (3) an adult over the age of 18 must be present for the period of time Our authorized technician is scheduled to provide service and while Our authorized technician is on Your property servicing the Covered Product. In-Home Service will be provided by Our authorized service provider during regular business hours, local time, Monday through Friday, except holidays. Our authorized service center may opt to remove the Covered Product to perform service in-shop. The Covered Product will be returned upon completion. Additional time and mileage charges for in-home repairs outside of twenty-five (25) contiguous land miles or the normal service radius of Our authorized service center are not covered by this Agreement, and are Your responsibility.

  • Closing Deliverables (a) At the Closing, Contributor shall deliver to Company the following: (i) a Xxxx of Sale in a form mutually agreed to by the Parties, duly executed by Contributor, effecting the transfer of the Contributed Assets to Company; (ii) the Joint Intellectual Property Ownership Agreement (the “IP Ownership Agreement”), substantially in the form attached hereto as Exhibit B, duly executed by Contributor and Xxxx Xxxxxxx as agent for Xxxxxxx Xxxxx; (iii) a Joinder to the Limited Liability Company Agreement of the Company, in a form reasonably acceptable to Company, duly executed by Contributor; (iv) the LTI Letter of Entitlement Agreement (as defined below), duly executed by Gaer (or his designee); (v) the Deed of Adherence, substantially in the form attached hereto as Exhibit E, duly executed by Gaer (or his designee); and (vi) such other instruments of transfer, assumption, filings or documents, in form and substance reasonably satisfactory to Company, as may be reasonably requested by Company (including, without limitation, any documents necessary to evidence and effectuate the assignment of the IP Ownership Agreement to Company); (vii) Gaer shall deliver to the Company an investor representation letter, substantially in the form attached hereto as Exhibit D, duly executed by Gaer; and (b) At the Closing, Company shall deliver to Contributor the following: (i) the Units, together with any instruments or documents evidencing Gaer’s ownership thereof; (ii) the Company’s Limited Liability Agreement, duly executed by the Company; and (iii) the Letter of Entitlement (the “LTI Letter of Entitlement”), substantially in the form attached hereto as Exhibit A, duly executed by Liquid Trading Int’l, LLP a limited liability partnership incorporated in England and Wales.

  • Seller Deliverables At the Closing, Seller shall take the following actions (or cause such actions to be taken): (i) deliver to Purchaser a copy of the Escrow Agreement, duly executed by Xxxxxx; (ii) deliver to Purchaser a certification from the Company that complies with Section 1445 of the Code and Treasury Regulations Sections 1.1445-2(c)(3) and 1.897-2(h), dated as of the Closing Date and executed by a responsible corporate officer of the Company, certifying that the Company Shares are not “United States real property interests” (within the meaning of Section 897(c)(1) of the Code), which the Purchaser is hereby authorized to deliver to the Internal Revenue Service on behalf of the Company after the Closing; provided that, if no such certificate is delivered at the Closing, Purchaser’s sole remedy shall be to deduct and withhold pursuant to Section 3.6 of this Agreement; (iii) to the extent that the Company Shares are in certificate form, deliver to Purchaser stock certificates evidencing the Company Shares, free and clear of all Encumbrances, other than restrictions on transfer imposed by applicable securities laws, duly endorsed in blank or accompanied by stock powers or other instruments of transfer duly executed in blank, with all required stock transfer Tax stamps affixed thereto, and to the extent that the Company Shares are not in certificate form, deliver to the Purchaser stock powers or other instruments of transfer duly executed in form for transfer, free and clear of Encumbrances, with respect to the Company Shares and such other documentation as is reasonably required to transfer the Company Shares in full to Purchaser; (iv) deliver to Purchaser (a) duly executed payoff letters (each, a “Payoff Letter”) in form and substance reasonably satisfactory to Purchaser from all financial institutions and other Persons to which any of the Indebtedness listed in Section 2.3 of the Company Disclosure Schedule is owed, or the applicable agent, trustee or other representative on behalf of such Persons, each of which Payoff Letters shall (x) indicate the total amount required to be paid to fully satisfy all principal, interest, prepayment premiums, penalties, breakage costs or other outstanding and unpaid obligations related to such Indebtedness as of the Closing Date (the “Payoff Amount”) and (y) state that all indebtedness, commitments, obligations (including guarantees) in respect thereof (subject to contingent indemnification obligations not yet accrued and payable and other obligations that expressly survive pursuant to the terms governing such indebtedness) and Encumbrances in connection therewith on the assets of the Company or any of its Subsidiaries shall be, substantially concurrently with the receipt of the Payoff Amount on the Closing Date by the Persons holding such Indebtedness, discharged and terminated in full and released or arrangements reasonably satisfactory to Purchaser for such release shall have been made by such time, subject, as applicable, to the replacement (or cash collateralization or backstopping) of any then-outstanding letters of credit or similar Indebtedness thereunder and (b) all documents, filings, and instruments necessary or customary to evidence the termination and release referred to in the preceding clause (a) (the “Release Documents”, together with each Payoff Letter, the “Payoff Documentation”); (v) deliver to Purchaser the resignations referred to in Section 7.16; and (vi) deliver to Purchaser the closing certificate contemplated by Section 8.2(c).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!