COLOR SELECTIONS Sample Clauses

COLOR SELECTIONS. If Seller chooses to offer color selections for the standard appliances or any other standard items in the Unit, then, Buyer agrees to make such selections within five (5) business days after receipt of written notice from Seller or Seller’s agent requiring Buyer to make such selections. Buyer expressly acknowledges and agrees that if Buyer fails to make such selections within the allotted time period, Seller shall be authorized to make the color selections on behalf of Buyer, and Buyer hereby affirms such selections. If any of the color selections become unavailable for any reason, Buyer agrees to select, within five (5) business days after notice thereof, another color selection from the alternative choices offered by Seller, or have the selections made by Seller as aforesaid. Buyer expressly agrees that the unavailability of any original color selection shall have no effect on Buyer's obligations hereunder and shall not in any way constitute grounds for any claim whatsoever against Seller, and Buyer expressly waives any rights, claims or actions which it might otherwise have against Seller as a result of such circumstances.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
COLOR SELECTIONS. County shall approval all colors prior to the ordering of any materials requiring color choice. County may choose up to two paint colors per office/room for walls.
Sample 1
COLOR SELECTIONS. Indicate color where applicable. Choices not indicated by EXHIBITOR will be selected by ART CRAFT to coordinate with show colors. ART CRAFT reserves the right to select or change colors based upon availability. 1. WORK RULES: Show Management and/or EXHIBITORS are not required to use Art Craft Display, Inc. (ART CRAFT) labor for loading/unloading, delivery/removal or installation/dismantle of any equipment, literature, etc. that they choose to handle themselves. In most cases, 4-wheel stock carts will be available on site for your use. Drayage and material handling equipment charges may apply depending on your agreement with show management regarding those services. Although the utmost care will be exercised, ART CRAFT is not responsible for resulting damage or loss from improper packing, concealed damage, theft or any other cause.
Sample 1
COLOR SELECTIONS. Eave S300 Standard TBD Eave Valspar Code N/A Rake S300 Standard TBD Rake Valspar Code N/A Corner S300 Standard TBD Corner Valspar Code PMW1614 Base S300 Standard TBD Base Valspar Code N/A Gutters S300 Standard TBD Gutters Valspar Code N/A Downspouts S300 Standard TBD Downspouts Valspar Code PMW1614 Roof to Roof None Roof to Wall None Trim Profile Contoured Downspout Type Press Broke * Note - Gutters selected may differ from the Gutters designed. Elevation SWC Bay N/A Quantity 5 Height 14'-0" Distance From Left Steelline 0'-0" Distance From Left Column 0'-0" Elbow Yes Trim S300 Standard TBD Trim Valspar Code PMW1614 Elevation N/A Distance From Left Steelline 0'-0" Bay N/A Distance From Floor 0'-0" Quantity 1 Distance From Left Column 0'-0" Size 3070 Trim S300 Standard TBD Style NL - Narrowlite Trim Valspar Code N/A Type Pre-Assembled Lockset Cylindrical Lockset Primer Color White Swing Left Hand Out In Liner No Glazing Laminated ADA Door Compliancy Wind Rated No No Options Kick Plate Keyed Alike Closer Insulated No Elevation EWD Distance From Left Steelline 8'-0" Bay 2 Distance From Floor 0'-0" Quantity 1 Distance From Left Column 3'-0" Size 3070 Trim S300 Standard TBD Style NL - Narrowlite Trim Valspar Code N/A Type Pre-Assembled Lockset Panic Primer Color White Swing Left Hand Out In Liner No Glazing Laminated ADA Door Compliancy Wind Rated No No Options Kick Plate Keyed Alike Closer Insulated No Elevation Partition 1 Distance From Start of Partition 22'-0" Bay 1 Distance From Floor 0'-0" Quantity 1 Distance From Left Column 22'-0" Size 3070 Trim S300 Standard TBD Style NL - Narrowlite Trim Valspar Code N/A Type Pre-Assembled Lockset Panic Primer Color White Swing Left Hand Out In Liner No Glazing Laminated ADA Door Compliancy Wind Rated No No Options Kick Plate Keyed Alike Closer Insulated No Elevation Partition 2 Distance From Start of Partition 31'-0" Bay 2 Distance From Floor 0'-0" Quantity 1 Distance From Left Column 4'-0" Size 3070 Trim S300 Standard TBD Style NL - Narrowlite Trim Valspar Code N/A Type Pre-Assembled Lockset Panic Primer Color White Swing Left Hand Out In Liner No Glazing Laminated ADA Door Compliancy Wind Rated No No Options Kick Plate Keyed Alike Closer Insulated No Elevation Bay B 3 Vertical Lift/Door Jamb Distance From Left Steelline No 27'-11" Quantity 1 Distance From Left Column 3'-5" Width 10'-0" Distance From Floor 9'-0" Height 3'-0" Trim S300 Standard TBD Clip Attachment Bolted Trim Valspar Code Require 3.5" Flanges on Jambs...
Sample 1

Related to COLOR SELECTIONS

  • Shift Selection Employee assignments within the Patrol Bureau will occur between approximately April 1-15 and shall be awarded based upon seniority. Approximately three (3) months before then the Department will publish a call for written requests on shift assignment. Employees will make their first three (3) choices known. Employees will learn of the assignment, including days off associated with their assignment, immediately after the bidding process is completed. Assignments will take effect on the schedule immediately following July 1st. Residence Hall assignments will be made prior to all others. No officer will be required to work a Residence Hall assignment in consecutive years. Assignment of the remaining officers will begin with selection(s) for day and night shifts. The bid for assignments will continue until all positions are filled. The following general rules apply to assignments: 1. During the term of this Agreement, no employee will be reassigned to a different shift other than the shift awarded by seniority except in situations where the University cannot continue to provide police services. In the event a shift reassignment must occur, it will be offered to volunteers based on seniority. If there are no volunteers it will be assigned to the least senior officer in the department. 2. Shift selection shall be an appropriate subject for the Joint Labor/Management Committee. 3. If a shift becomes available as a result of trainees being released for duty, and if there is at least four (4) months until the next shift change, the shift will be posted and awarded by seniority. The new trainee released for duty will take the senior officers shift. If no employee desires the shift, the trainee scheduled for assignment will be assigned that shift. The parties recognize that for the betterment of the Department it may be necessary to assign a trainee to a specific shift. 4. Voluntary shift trades will be allowed as long as overtime costs are not incurred. 5. Except in a bona fide emergency, no employee shall be assigned to work more than sixteen (16) hours in a twenty-four (24) hour period, provided however employees may volunteer to work up to eighteen (18) hours in a twenty-four (24) hour period.

  • Panel Selection 1. The Parties shall apply the following procedures in selecting a Panel: (a) the Panel shall comprise 3 members; (b) within 15 days following the date of the establishment of the Panel, each Party shall nominate a Panelist; (c) the Parties shall endeavor 2. If a Panelist appointed under this Article resigns or becomes unable to act, a successor Panelist shall be appointed within 30 days in accordance with the selection procedure as prescribed for the appointment of the original Panelist and the successor shall have all the powers and duties of the original Panelist. The work of the Panel shall be suspended during the appointment of the successor Panelist.

  • Site Selection 5.1.1 If the parties have not designated the street address of the Franchised Location on Exhibit A on the Effective Date, Franchisee shall identify, submit and obtain Franchisor’s prior written approval of the Franchised Location meeting the requirements of this Agreement prior to entering a lease or sublease for the Franchised Location. Franchisee shall provide Franchisor all information required by Franchisor, as determined by Franchisor in Franchisor’s sole determination, necessary for Franchisor to evaluate the Franchised Location. Franchisor shall have ten (10) business days to review Franchisee’s written site proposal for the Franchised Location and notify Franchisee of its approval or disapproval in writing. Franchisor’s failure to respond within ten (10) business days shall signify Franchisor’s disapproval of the site. Franchisor shall not unreasonably withhold Franchisor’s approval of a proposed site for the Franchised Location. 5.1.2 Franchisee must have a site for the Franchised Location approved by Franchisor, receive the opening notice from Franchisor described in Section 5.4 below, and open Franchisee’s Franchised Business for business within six (6) months from the Effective Date, except as otherwise provided in Section 5.1.3 All matters related in any way to Franchisee’s site are Franchisee’s sole responsibility, regardless of any assistance Franchisor may choose to provide. Franchisee is responsible for obtaining any architectural and engineering services required for Franchisee’s facility and for ensuring its compliance with local law. Neither Franchisor, nor any other person or company associated with Franchisor shall have any liability for any site‐related matter. Xxxxxxxxxx agrees not to make any claims against Franchisor and/or any of Franchisor’s affiliates or associates with regard to such matters. 5.1.4 If Franchisor makes a loan to Franchisee for (i) Franchisee’s purchase of the franchise for the Franchised Business; (ii) the remodeling of the Franchised Location; (iii) the transfer of any interest in this franchise or this Agreement; or (iv) any other purpose; Franchisee shall open (or re‐open, as the case may be), the Franchised Business for business within sixty (60) days from the loan origination date.

  • Contractor Selection In this section, please describe the selection process, including other sources considered and the rationale for selecting the contractor. Please answer all questions: a. What specific skill set does this contractor bring to the project? Please attach a copy of the contractor’s resume if an individual or link to contractor website if a company: Little to Great Scientists is an international leader in early childhood, elementary, middle and high school science education. xxxxx://xxxxxxxxxxxxxxxxxxxxxxx.xxx/ b. How was the Contractor selected? Quotes, RFP/RFQ, Sealed Bid or Sole Source designation from the City of New Haven Purchasing Department? This contractor was selected because of their continued commitment to NHPS. They possess the knowledge base, resources, and motivation to support hands-on science education in New Haven. No other contractors were considered for this partnership. c. Is the contractor the lowest bidder? N/A If no, why? Why was this contractor selected? This contractor was selected because of their unique expertise in hands-on science learning and their continued commitment to New Haven Public Schools. They possess the knowledge and resources to support science learning at Xxxxxxx Xxxxxx School. d. Who were the members of the selection committee that scored bid applications? N/A e. If the contractor is Sole Source, please attach a copy of the Sole Source designation letter from the City of New Haven Purchasing Department. N/A

  • Single Source Selection Services for tasks in circumstances which meet the requirements of paragraph 3.10 of the Consultant Guidelines for Single Source Selection, may, with the Association's prior agreement, be procured in accordance with the provisions of paragraphs 3.9 through 3.13 of the Consultant Guidelines.

  • Mortgagor Selection No Mortgagor was encouraged or required to select a Mortgage Loan product offered by the Originator which is a higher cost product designed for less creditworthy mortgagors, unless at the time of the Mortgage Loan's origination, such Mortgagor did not qualify taking into account credit history and debt-to-income ratios for a lower-cost credit product then offered by the Originator or any Affiliate of the Originator. If, at the time of loan application, the Mortgagor may have qualified for a lower-cost credit product then offered by any mortgage lending Affiliate of the Originator, the Originator referred the related Mortgagor's application to such Affiliate for underwriting consideration;

  • FLORIDA CONVICTED/SUSPENDED/DISCRIMINATORY COMPLAINTS By submission of an offer, the respondent affirms that it is not currently listed in the Florida Department of Management Services Convicted/Suspended/Discriminatory Complaint Vendor List.

  • Adverse Selection No selection procedures adverse to the Noteholders were utilized in selecting the Receivables from those receivables owned by AmeriCredit which met the selection criteria set forth in clauses (A) through (M) of number 29 of this Schedule B.

  • Recruitment and Selection Swedish Medical Center will recruit and hire the most qualified applicants to meet the staffing needs of the Center and thereafter transfer, promote, and retain such persons as employees. All such actions and decisions shall comply with the Center’s desire to promote from within whenever qualified candidates are identified, interested, and available.

  • Distribution of UDP and TCP queries DNS probes will send UDP or TCP “DNS test” approximating the distribution of these queries.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!