Supplier Diversity Seller shall comply with Xxxxx’s Supplier Diversity Program in accordance with Appendix V.
Customer Focus Is dedicated to meeting the expectations and requirements of internal and external customers; gets first hand customer information and uses it for improvements in products and services; acts with customers in mind; establishes and maintains effective relationships with customers and gains their trust and respect Integrity and Trust Is widely trusted; is seen as a direct, truthful individual; can present the unvarnished truth in an appropriate and helpful manner; keeps confidences; admits mistakes; doesn’t misrepresent him/herself for personal gain. Drive For Results Can be counted on to exceed goals successfully; Is constantly and consistently one of the top performers; very bottom line oriented; steadfastly pushes self and others for results. Decision Quality Makes good decisions (without considering how much time it takes) based upon a mixture of analysis, wisdom, experience, and judgment; most of his/her solutions and suggestions turn out to be correct and accurate when judged over time; sought out by others for advice and solutions. Managing & Measuring Work Clearly assigns responsibility for tasks and decisions; sets clear objectives and measures; monitors process, progress, and results; designs feedback loops into work. Organisational Agility Knowledgeable about how organizations work; knows how to get things done both through formal channels and the informal network; understands the origin and reasoning behind key policies, practices, and procedures; understands the cultures of organizations. Interpersonal Savvy Relates well to all kinds of people – up, down, and sideways, inside and outside the organisation; builds appropriate rapport; builds constructive and effective relationships; uses diplomacy and tact; can defuse even high-tension situations comfortably. Motivating Others Creates a climate in which people want to do their best; can motivate many kinds of direct reports and team or project members; can assess each person and get the best out of him/her; pushes tasks and decisions down; empowers others; invites input from each person and shares ownership and visibility; makes each individual feel his/her work is important; is someone people like working for and with. • Directors of Nursing • Patients, families and whānau • Clinical Nurse Specialists • LMC Access Holders • Integrated Operations Centre • Other service providers (DHBs, NGOs, PHO) • Clinical Directors/Clinical Leaders • Health and Welfare Agencies • Service Managers • Relevant Support Groups • Other Charge Nurse Managers/Charge Midwife Managers/Unit Managers • University of Otago School of Medicine, Otago and Southland Polytechnics • Practice Development Unit staff • Professional Colleges and Registration Bodies • Clinical and Corporate support staff • SDHB wide staff The expertise required for a person to be fully competent in the role. Position specific competencies: ESSENTIAL DESIRABLE Education and Qualifications (or equivalent level of learning) • Registered Nurse/Midwife. • Holds a current practising certificate. • Holds a current portfolio (PDRP/QLP) or equivalent appropriate to the role. • Post-graduate diploma or degree in a relevant field. • Experience • Nursing leadership experience. • A history of a collaborative team approach. • Proven clinical credibility. • Extensive experience in the health sector. • Extensive experience of clinical quality and safety, best practice. • • Critical consumer of research and embraces evidenced based practice when carrying out tasks/functions. Knowledge and Skills • Strong clinical leadership and management skills. • Extensive knowledge of the health sector. • Extensive knowledge of clinical quality and safety, best practice. • Excellent group facilitation skills. • Advanced communication techniques such as conflict resolution, diffusion and mediation skills. • Knowledge of and demonstrated use of adult teaching and learning principles. • Personal Qualities • Commitment and personal accountability. • Excellent interpersonal skills, including ability to work effectively with people at all levels of the organisation. • Acts with discretion, sensitivity and integrity at all times. • Is adaptable and flexible – open to change (positive or negative). • Innovative and flexible with a positive problem solving approach in all situations. • Maintains an exceptionally high level of confidentiality. • Forward thinker, flexible, courteous, self-motivated. • Committed to continuous quality improvement. • Ability to liaise and network at all levels. • A reasonable level of fitness is required to cope with the demanding physical requirements of the job. The following denote the key physical requirements for the position: standing, walking, bending, sitting, stairs, simple grasping, fine manipulation, operating machinery/equipment, lifting, overhead reaching, carrying, pushing/pulling, twisting, climbing/balancing, crouching/squatting, manual handling of people, other reaching, and ability to participate in personal restraint if required. Clinical Leadership Xxxxxx a culture that strives for excellence in clinical service provision within allocated resources. • Promote excellence in clinical service provision through the sharing of new knowledge, ideas, and research. • Encourage innovation and practice initiatives that enhance clinical care or service provision. • Maintain a high standard of clinical expertise within the xxxx/unit. • Xxxxxx the development of a cohesive team which works collaboratively to achieve optimal patient/ service outcomes. • Be active and visible within the team, motivating and actively praising/valuing staff endeavours, and acknowledging patient satisfaction and good clinical care. • Promote patient/client centred care that incorporates a strong customer service philosophy through effective and positive interactions with patients/ clients, staff, visitors and other agencies. • Ensure clinical practice is provided within accepted professional standards, codes, policies and relevant legislation. • Ensure Treaty of Waitangi principles and Tikaka best practice guidelines are fully integrated into practice. • Encourage a culture of continuous learning, positive critique of the status quo and use of evidence based practice. • Ensure there is adequate leadership and principles of direction and delegation are adhered to by all staff. Service Planning and Delivery Lead and manage wards/units to provide efficient and effective services. Participate in and lead where relevant, xxxx/ unit service planning. • Lead and manage respective wards/units/services in accordance with operational plans and budgets. • Ensure a consumer/patient service focus is adopted and maintained at all xxxx/unit/service team level. • Implement Southern District Health Board wide policies and processes. • Ensure service delivery complies with Health and Disability sector standards and relevant legislation. • Actively participate in the preparation of service activity plans. • In conjunction with the Associate Director of Nursing/ Director of Nursing/Service Manager ensure service planning and delivery complies with Ministry of Health elective service performance indicator standards (where applicable). • Ensure adherence to the SDHB delegations of authority. • Effectively utilise Southern District Health Board information systems and data to enable xxxx/unit/ service patient care management and human resource utilisation activities. • Identify, lead and manage projects to improve xxxx/ unit/service efficiency and effectiveness. • Lead the team to effectively ensure discharge processes are robust and support the needs of the service, including timeliness, and staff responsibility in efficient discharge planning. • Build and maintain effective relationships and communication mechanisms with staff, associated clinical and support services, and external agencies as applicable. • Develop and implement audit care pathways in conjunction with clinical staff. • Ensure integrated care plans are utilised in clinical service delivery. • Facilitate and champion the integration of the SDHB Team based model of nursing practice. • Monitor xxxx/unit/service performance against key performance indicator targets, identifying and implementing corrective actions as and if required in conjunction with the Associate Director of Nursing/ Director of Nursing/Service Manager. • Prepare accurate monthly management reports for the xxxx/unit including variance analysis of key performance indicators, balanced scorecard and financial management variances together with corrective actions. • Prepare business cases and/or reports as requested/ required by the Associate Director of Nursing/Director of Nursing/ Service Manager. Staff Management and Planning Ensure the service/s is/are appropriately staffed. Best practice human resource standards are met. Effectively lead and manage assigned staff in order to develop and maintain a cohesive and productive team. Ensure effective communication within service. • Lead by example acting as a positive, motivating and inspiring role model for all staff. • Model sound Human Resource practice and, facilitate coaching and performance development for staff, in consultation with Human Resources and the Associate Director of Nursing/Director of Nursing/Service Manager; facilitate change management as appropriate. • Ensure effective recruitment, orientation, preceptorship, rostering and administration of staff in accordance with Southern District Health Board policies. • Develop a comprehensive staffing plan for staff directly reporting to the CNM/MM that recognises potential shortcomings and identifies strategies to address gaps both short and long term. • Ensure professional staff practice with a current annual practising certificate and logs in the appropriate reporting system. • Ensure rosters are developed in accordance with approved core roster resource levels and SDHB Rostering Standards and budgets. • Ensure appropriately budgeted training and development plans are in place for all staff. In conjunction with the ACN/CNS/Practice Development • Develop communication mechanisms that facilitate effective and timely communication within and across the xxxx/s and/or unit/s. • Proactively plan and implement appropriate staffing aligned with variations in patient/staff activity, e.g. winter, Christmas, school holidays. • Ensure timely staff appraisal and feedback structures are in place. With staff, identify professional development plans aligned to SDHB and service priorities. • Proactively deal with staff conflict and performance issues. • Ensure effective strategies are in place to resolve issues. • Maximise opportunities to create a harmonious working environment. Show positive leadership and seek feedback. • Manage employee leave to ensure service demands are matched with the legal requirements for staff to take leave. • Ensure accuracy and timeliness in rostering and payroll transactions in compliance with OneStaff (staff management system) and the SDHB Rostering Standards Unit Nurse Educator, and ensure in-service training and education is carried out to maintain quality of service. • Promote and facilitate nursing staff participation in the PDRP (Professional Development Recognition Programme). • Ensure all staff have an up to date annual leave management plan at all times. Financial Management Work within budgets for the financial year, and work in collaboration with the Associate Director of Nursing/Director of Nursing/Service Manager to develop risk mitigation strategies for unexpected expenditure. Participate in developing and managing annual and three year capital expenditure plan. • Report to the Associate Director of Nursing/Director of Nursing/Service Manager on a monthly basis, financial performance including variations and corrective actions. • Work closely with Analyst to understand variances and operationalise mitigating strategies. • Participate in annual budgeting process with Associate Director of Nursing/Director of Nursing/Service Manager and Analyst. Report to the Associate Director of Nursing/Director of Nursing/Service Manager on a monthly basis, financial performance including variations and corrective actions. • Work closely with Analyst to understand variances and operationalise mitigating strategies. • Participate in annual budgeting process with Associate Director of Nursing/Director of Nursing/Service Manager and Analyst. • Manage capital expenditure within annual capital expenditure plans, and in accordance with SDHB policies and procedures. • Proactively engage with staff to identify ideas and action plans for xxxx/unit efficiency improvements and cost reduction initiatives. Quality and Risk Management Manage xxxx/unit quality and risk programmes. Lead and manage certification and accreditation within xxxx/unit. Xxxxxx a quality improvement culture. • Lead, administer and facilitate staff involvement in xxxx/unit quality and risk programmes and action plans, and participate in service wide programmes, in accordance with Southern District Health Board policy. • Lead and manage service level health and safety programmes including audit of hazards and routine reporting of incidents and accidents. • Investigate complaints, incidents and other matters in a timely manner, reporting outcomes as required • Ensure compliance including: all relevant standards and legislation, health safety, professional regulations, and equipment. • Manage xxxx/unit balanced scorecard and report and manage variations. • Lead the xxxx/unit incident reporting and investigation processes, within SDHB policies and procedures. • Support and demonstrate the philosophy and practice of a service and organisational wide systems approach to service and operational processes. including development of action plans to facilitate xxxx/unit/ service development. • Proactively develop new xxxx/unit/service policies and protocols in conjunction with members of the team. • Maintain professional and organisational quality standards. • Ensure delivered work is planned, delivered, and implemented consistently against quality standards. • Continuously identify improvement opportunities to perform job in most effective manner. • Investigate opportunities to achieve goals in a more efficient way. • Lead and support the implementation of the Releasing Time to Care programme for the xxxx/unit/ service. • Performance is in alignment with HR quality audit standards, organisational requirements, and professional standards. • Lead the roll out and continual update of visual management boards for the xxxx/unit/service which displays key elements of performance for staff and patients. Strategic Management Contribute and lead xxxx/unit operational and clinical projects. Lead in the process of change and instil a continuous quality improvement culture. • Maintain knowledge of current and emerging strategic priorities for the relevant service grouping specialties. • Lead assigned projects that are of strategic xxxx/unit & service priority, ensuring their effective completion within assigned timeframes and resources. • Build a collective vision for the xxxx/unit to allow staff to have a clear understanding of their role in service provision. • Use Balanced Scorecard, incidents, complaints and other KPIs to inform xxxx/unit development and improvement opportunities • Participates in SDHB wide projects as relevant to xxxx/unit/service. • Participate in focus groups/projects that advance issues and strategies for the organisation. • Provide cover for other CNM/CMM/UM within the service as required. • Act up as Associate Director of Nursing/Director of Nursing/Service Manager as required/requested. • Participate collectively with other CNM/CMM to provide a collaborative approach to provide clinical service provision. • Plan and manage own work to achieve desired results on time, within budget and to required standard. • Act as a role model for the SDHB organisational values.
Customer Content As part of the Services provided under this Agreement, Customer Data will be stored and processed in the data center region specified in the applicable Ordering Document. Axway shall not access Customer Content except in response to support or technical issues where Customer provides Axway with prior Customer’s written authorization required to access such Customer Content. Axway is not responsible for unauthorized access, alteration, theft or destruction of Customer Content arising from Customer’s own or its authorized users’ actions or omissions in contravention of the Documentation. Customer’s ability to recover any lost data resulting from Axway’s misconduct is limited to restoration by Axway from the most recent back-up.
Product Warnings As of the Effective Date, all Products CORE sells and/or distributes for sale in California which do not qualify as Reformulated Products, will bear a clear and reasonable warning pursuant to this Section. CORE further agrees that the warning will be prominently placed with such conspicuousness when compared with other words, statements, designs or devices as to render it likely to be read and understood by an ordinary individual under customary conditions of use. For purposes of this Settlement Agreement, a clear and reasonable warning for the Products shall consist of a warning affixed directly to the product or product packaging, label, or tag, for Products sold in California and containing one of the following statements: WARNING: Reproductive Harm- xxx.X00Xxxxxxxx.xx.xxx OR WARNING: This product can expose you to chemicals, including DEHP, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to xxx.X00Xxxxxxxx.xx.xxx
Customer Equipment Customer represents and warrants that it owns or has the legal right and authority, and will continue to own or maintain the legal right and authority during the term of this Agreement, to place and use the Customer Equipment as contemplated by this Agreement. Customer further represents and warrants that its placement, arrangement, and use of the Customer Equipment in the Internet Data Centers complies with the Customer Equipment Manufacturer's environmental and other specifications.
System Upgrade Facilities and System Deliverability Upgrades Connecting Transmission Owner shall design, procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Appendix A hereto. The responsibility of the Developer for costs related to System Upgrade Facilities and System Deliverability Upgrades shall be determined in accordance with the provisions of Attachment S to the NYISO OATT.
SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work.
4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work.
4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged.
4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents.
4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents.
4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof.
4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals.
4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.
Customer The agency or eligible user that purchases commodities or contractual services pursuant to the Contract.
Custom Products Effective upon creation of Custom Products, Contractor hereby conveys, assigns and transfers to Authorized User the sole and exclusive rights, title and interest in Custom Product(s), whether preliminary, final or otherwise, including all trademark and copyrights. Contractor hereby agrees to take all necessary and appropriate steps to ensure that the Custom Products are protected against unauthorized copying, reproduction and marketing by or through Contractor, its agents, employees, or Subcontractors. Nothing herein shall preclude the Contractor from otherwise using the related or underlying general knowledge, skills, ideas, concepts, techniques and experience developed under a Purchase Order, project definition or work order in the course of Contractor’s business. Authorized User may, by providing written notice thereof to the Contractor, elect in the alternative to take a non-exclusive perpetual license to Custom Products in lieu of Authorized User taking exclusive ownership and title to such Products. In such case, Licensee on behalf of all Authorized Users shall be granted a non-exclusive perpetual license to use, execute, reproduce, display, perform, adapt and distribute Custom Product as necessary to fully effect the general business purpose(s) as stated in paragraph (b)(i)(2), above.
Supplier’s Staff 3.3.1 Access to the Premises shall be limited to such Staff and the Supplier’s suppliers as are necessary for the Supplier to fulfil its obligations under the Contract. The Supplier shall co-operate with others working on the Premises to such extent as the Authority may reasonably require.
3.3.2 The Authority reserves the right to refuse to admit to, or to withdraw permission to remain on, the Premises:-
(a) for any member of the Staff; or
(b) for any person employed or engaged by any member of the Staff, whose admission or continued presence would be, in the reasonable opinion of the Authority, undesirable.
3.3.3 At the Authority’s written request, the Supplier shall provide a list of the names and business addresses of all persons who may require admission in connection with the Contract to the Premises, specifying the capacities in which they are concerned with the Contract and giving such other particulars as the Authority may reasonably request.
3.3.4 The Supplier’s Staff, engaged within the boundaries of the Premises, shall comply with such rules, regulations and requirements (including those relating to security arrangements) as may be in force from time to time for the conduct of personnel when at or outside those premises.
3.3.5 If the Supplier fails to comply with Clause 3.3.3 within one (1) Month of the date of the request and in the reasonable opinion of the Authority, such failure may be prejudicial to the interests of the Crown, then the Authority may terminate the Contract, provided always that such termination shall not prejudice or affect any right of action or remedy which shall have accrued or shall thereafter accrue to the Authority.
3.3.6 The decision of the Authority as to whether any person is to be refused access to the Premises and as to whether the Supplier has failed to comply with Clause 3.3.3 shall be final and conclusive.
