Development Hours Sample Clauses

Development Hours. The Parties acknowledge that Worldspan has previously provided consulting and development services to assist Priceline with design of [**] reports and other issues relating to the GDS, Priceline’s operations, and back-office functions. In the event that Priceline requires additional consulting and development services beyond those provided prior to the Second Amendment Effective Date, then, upon Priceline’s request, Worldspan shall provide qualified individuals to provide other technical services. These services shall be charged to Priceline at the rate of [**] per person-hour or Worldspan’s then current standard rate for consulting services, whichever is higher.
AutoNDA by SimpleDocs
Development Hours. Sabre will provide Customer with up to ***** development labor hours *****. These development hours are *****.
Development Hours. Development Hours are hereby reset to [***], subject to annual percentage increase and Costco’s audit rights. *** Confidential treatment requested pursuant to a request for confidential treatment filed with the Securities and Exchange Commission. Omitted portions have been filed separately with the Commission.
Development Hours. The Client is entitled to sixty (60) development hours per month for development by the Service Provider development staff during the term of this agreement as described in Appendix A, Section 3.2 attached hereto. Non-Standard Service. Any work, software development, consulting, support, and training performed by the Service Provider outside of the Standard Service defined in this Agreement will be considered on an Individual Case Basis ("ICB") in accordance with the Major Change Control Procedures outlined in Appendix A, Section 3.2.2 attached hereto, and shall be agreed to in writing by Client. Development hours can be allocated towards Non-Standard Service, however if agreed to be chargeable, shall not be invoiced by Service Provider prior to receiving an executed ICB agreement.
Development Hours. (minimum provision)
Development Hours. Xxxxx dedicates a base number of hours monthly for missions during development for debugging, programming, design, and helping push through roadblocks. Kubos can fill any role that the mission and the client need including: ● Mission design ● Code reviewSoftware architecture ● Debugging ● Training ● Custom code development Response Time During the satellite’s development phase, Kubos’ engineers will be available for questions or assistance via email, the web, or phone with a guaranteed response to any issue. With an acknowledgment of request, we will begin working on the problem. We will work closely with the customer to resolve any and all issues. Response times come in 4, 2, and 1 business hours segments to meet the mission needs. Flexibility Mission development is an ever-changing process. Timelines change, engineers change money changes and objectives change, which is why we designed our Development SLA to be able to change with you. Development SLAs come standard with a 30-day cancellation policy, flexible hours after the base hours are met, as well as support for all software on the satellite. Kubos Xxxxxx Xxxxxx is a development and testing environment allowing satellite development teams access to a range of development and satellite hardware to build mission software before buying hardware. This allows teams to make informed hardware decisions using real metrics based on your code. Once flight hardware has been chosen, Xxxxxx also helps avoid hardware access bottlenecks for teams.

Related to Development Hours

  • Development Work The Support Standards do not include development work either (i) on software not licensed from CentralSquare or (ii) development work for enhancements or features that are outside the documented functionality of the Solutions, except such work as may be specifically purchased and outlined in Exhibit 1. CentralSquare retains all Intellectual Property Rights in development work performed and Customer may request consulting and development work from CentralSquare as a separate billable service.

  • Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.

  • Research Program 2.1 University will use reasonable efforts to conduct the Research Program described in Attachment A which is hereby incorporated in full by reference (“Research Program”), and will furnish the facilities necessary to carry out said Research Program. The Research Program will be under the direction of _____________________ (“Principal Investigator”), or his or her successor as mutually agreed to by the Parties and will be con­ducted by the Principal Investigator at the University.

  • Research Program Term The Research Program shall be conducted during the period of five years commencing as of the Agreement Date ("Research Program Term"). Upon not later than seventy-five (75) days' prior written notice JT may, in its sole judgment, terminate the Research Program at the end of the third (3/rd/) year and fourth (4/th/) year of the Research Program. The RMC may terminate the Research Program any time during the Research Program Term if it unanimously determines the Research Program is no longer scientifically useful or that all potential Products would not be commercially viable. In case of such an early termination by JT or the RMC, JT shall be exempt from any payment(s) under Section 10(a) that would have become due and payable after the effective date of such early termination. Following any termination of the Research Program (i) that occurs simultaneously with the termination of this Agreement in accordance with Section 13 (i.e., no compound or Lead Compound has been designated previously a Collaboration Lead Compound in accordance with Section 3(b) and no Independent Lead Compound is being developed in accordance with Section 3(m)) or (ii) that is followed at some future date by the termination by JT of Development or co-promotion of any Collaboration Lead Compound and/or Product pursuant to Sections 3(l) or 5(c), respectively, or development of an Independent Lead Compound in accordance with Section 3(m) (A) any licenses granted by Tularik to JT will terminate, (B) JT will grant to Tularik an exclusive, sublicensable, worldwide license, to make, use and sell compounds, Collaboration Lead Compounds or Products under JT's interest in Program Patents and Program Know-How and (C) under the terms and conditions to be separately agreed, JT will also grant to Tularik a nonexclusive, sublicensable, worldwide license under any JT Patent Rights and Know-How to the extent necessary to practice the license granted under the Program Patents and Program Know-How in (B) (including, with respect to compounds, a limited number of JT's library compounds approved by JT); provided, however, that in the event the Research Program terminates but the Agreement has not terminated with respect to designated Collaboration Lead Compounds, Independent Lead Compounds and/or Products as provided in Section 2(g)(ii), Sections 2(g)(A), (B) and (C) shall apply only to those compounds, Collaboration Lead Compounds, Independent Lead Compounds and Products for which Development or co-promotion shall have been terminated and/or to those compounds or Lead Compounds that have not been designated previously a Collaboration Lead Compound in accordance with Section 3(b) or an Independent Lead Compound in accordance with Section 3(m); provided further that in the event that JT elects to pursue a Discontinued Compound or a Non-Proposed Compound on or before the first anniversary of the expiration or termination of the Research Program Term pursuant to Section 3(b)(iii) or 3(b)(iv), respectively, Sections 2(g)(A), (B) and (C) shall not apply to such Discontinued Compound or Non-Proposed Compound until such time as JT shall have terminated the Development or co-promotion of such Discontinued Compound or Non- Proposed Compound. Tularik will then be free to pursue clinical development and registration of such compounds, Lead Compounds and/or Products without obligation to JT except as provided in Section 4(f) or Section 5(c), as appropriate.

  • Development Program A. Development activities to be undertaken (Please break activities into subunits with the date of completion of major milestones)

  • Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Contract Area, including its abandonment.

  • Project Plan Development of Project Plan Upon the Authorized User’s request, the Contractor must develop a Project Plan. This Project Plan may include Implementation personnel, installation timeframes, escalation procedures and an acceptance plan as appropriate for the Services requested. Specific requirements of the plan will be defined in the RFQ. In response to the RFQ, the Contractor must agree to furnish all labor and supervision necessary to successfully perform Services procured from this Lot. Project Plan Document The Contractor will provide to the Authorized User, a Project Plan that may contain the following items: • Name of the Project Manager, Contact Phone Numbers and E-Mail Address; • Names of the Project Team Members, Contact Phone Numbers and E-Mail Address; • A list of Implementation milestones based on the Authorized User’s desired installation date; • A list of responsibilities of the Authorized User during system Implementation; • A list of designated Contractor Authorized Personnel; • Escalation procedures including management personnel contact numbers; • Full and complete documentation of all Implementation work; • Samples of knowledge transfer documentation; and • When applicable, a list of all materials and supplies required to complete the Implementation described in the RFQ. Materials and Supplies Required to Complete Implementation In the event that there are items required to complete an Implementation, the Contractor may request the items be added to its Contract if the items meet the scope of the Contract. Negotiation of Final Project Plan If the Authorized User chooses to require a full Project Plan, the State further reserves the right for Authorized Users to negotiate the final Project Plan with the apparent RFQ awardee. Such negotiation must not substantively change the scope of the RFQ plan, but can alter timeframes or other incidental factors of the final Project Plan. The Authorized User will provide the Contractor a minimum of five (5) business days’ notice of the final negotiation date. The Authorized User reserves the right to move to the next responsible and responsive bidder if Contractor negotiations are unsuccessful.

  • Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.

  • Development and Commercialization Subject to Sections 4.6 and 4.7, Fibrocell shall be solely responsible for the development and Commercialization of Fibrocell Products and Improved Products. Fibrocell shall be responsible for all costs incurred in connection with the Fibroblast Program except that Intrexon shall be responsible for the following: (a) costs of establishing manufacturing capabilities and facilities in connection with Intrexon’s manufacturing obligation under Section 4.6 (provided, however, that Intrexon may include an allocable portion of such costs, through depreciation and amortization, when calculating the Fully Loaded Cost of manufacturing a Fibrocell Product, to the extent such allocation, depreciation, and amortization is permitted by US GAAP, it being recognized that the majority of non-facilities scale-up costs cannot be capitalized and amortized under US GAAP); (b) costs of basic research with respect to the Intrexon Channel Technology and Intrexon Materials (i.e., platform improvements) but, for clarity, excluding research described in Section 4.7 or research requested by the JSC for the development of a Fibrocell Product or an Improved Product (which research costs shall be reimbursed by Fibrocell); (c) [*****]; and (d) costs of filing, prosecution and maintenance of Intrexon Patents. The costs encompassed within subsection (a) above shall include the scale-up of Intrexon Materials and related active pharmaceutical ingredients for clinical trials and Commercialization of Fibrocell Products undertaken pursuant to Section 4.6, which shall be at Intrexon’s cost whether it elects to conduct such efforts internally or through Third Party contractors retained by either Intrexon or Fibrocell (with Intrexon’s consent).

  • Project Scope The physical scope of the Project shall be limited to only those capital improvements as described in Appendix A of this Agreement. In the event that circumstances require a change in such physical scope, the change must be approved by the District Committee, recorded in the District Committee's official meeting minutes, and provided to the OPWC Director for the execution of an amendment to this Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!