DISCOUNTED Sample Clauses

DISCOUNTED. Remember to have your propane fireplace serviced with an annual cleaning before the winter season begins. Annual maintenance helps prevent any possible safety hazards. XXX is not responsible for soot damage due to: • The customer’s modification of or placement of fireplace logs that is not consistent with the manufacturer’s instructions or specifications. • Blockage or soot build up in venting or chimney. With the purchase of one of the following agreements, your Propane Fireplace Agreement price will be discounted to $134. AGREEMENT PRICE Furnace $309 Boiler $319 Heat Pump $299 TERMS and CONDITIONS for SERVICE AGREEMENTS The service plans described in this brochure are subject to SMO Energy's / Xxxxxxxx’x terms and conditions of service which are provided separately in addition to those listed below: 24/7 coverage for covered parts,‘Emergency Service’ is defined as no heat. Non-emergency calls requested after 5pm on weekdays and weekend calls will be billed at Xxxxxxxx’x prevailing labor rates. For Attic HVAC Systems: For safety reasons, access to attic-mounted HVAC systems requires flooring. Allowances: Please see all covered parts listed in this agreement and make note of certain parts that carry an allowance. For example, see ECM motors and Extrol tanks.The allowance noted will be applied to the total cost of the repair billed at prevailing labor rates. MD-HVAC-R 01~7288. For a full list of terms and conditions, visit: XXXxxxxxx.xxx/xxxxxxxxxxxxxx.
Sample 1
AutoNDA by SimpleDocs
DISCOUNTED. Outreach campaigns directed towards bringing specific high risk populations (including both Medi-Cal and non-Medi-Cal persons) into health care services are only allowable to the extent they bring Medi-Cal eligibles into Medi-Cal Exhibit C
Sample 1
DISCOUNTED pdf Supplementary information may be scanned and uploaded. (Company information, brochures, catalogs, etc.) (PDF Format ONLY) DO NOT UPLOAD encrypted or password protected files. Logo and Other Company Marks company-logo-2.gif If you desire, please upload your company logo to be added to your individual profile page on the TIPS website. If any particular specifications are required for use of your company logo, please upload that information under the Supplementary section or another non-required section under the “Response Attachment” tab. Preferred Logo Format: 300 x 225 px - .png, .eps, .jpeg preferred Certification of Corporate Offerer Form- COMPLETE ONLY IF OFFERER IS A CORPORATION TIPS-Certification of Corporate Offerer Form Unipak Corp.pdf COMPLETE AND UPLOAD FORM IN ATTACHMENTS SECTION ONLY IF OFFERER IS A CORPORATION Disclosure of Lobbying Activities Standard Form LLL No response ONLY IF you answered "I HAVE Lobbied per above" to attribute #66, please download and complete and upload the Standard Form-LLL, “disclosure Form to Report Lobbying,” in the Response attachments section. Confidentiality Claim Form Unipak Corp. Confidentiality Claim Form.pdf REQUIRED CONFIDENTIALITY FORM. PLEASE READ CAREFULLY AND FOLLOW THE INSTRUCTIONS. Complete the form according to your company requirements, make any desired attachments and upload to the appropriate section under "Response Attachments" THIS FORM DETERMINES HOW ESC8/TIPS RESPONDS TO LEGAL PUBLIC INFORMATION REQUESTS. Current W-9 Tax Form Unipak Corp. W-9 2022.pdf You are required by TIPS to upload a current W-9 Internal Revenue Service (IRS) Tax Form for your entity. This form will be utilized by TIPS to properly identify your entity. Response Attachments
Sample 1
DISCOUNTED. Secondary
Sample 1
DISCOUNTED. Remember to have your propane fireplace serviced with an annual cleaning before the winter season begins. Annual maintenance helps prevent any possible safety hazards. XXX is not responsible for soot damage due to: • The client’s modification of or placement of fireplace logs that is not consistent with the manufacturer’s instructions or specifications. • Blockage or soot build up in venting or chimney. With the purchase of one of the following agreements, your Propane Fireplace Agreement price will be discounted AGREEMENT PRICE Furnace $299 Boiler $309 Heat Pump $289 to $129. TERMS and CONDITIONS for SERVICE AGREEMENTS
Sample 1

Related to DISCOUNTED

  • Discount In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

  • Prepayment Prepayment of the Notes to be prepaid pursuant to this Section 8.7 shall be at 100% of the principal amount of such Notes, together with accrued and unpaid interest on such Notes accrued to the date of prepayment but without any Make-Whole Amount. The prepayment shall be made on the Change in Control Proposed Prepayment Date, except as provided by Section 8.7(f).

  • Additional Discounts? Do you offer additional discounts to TIPS members for large order quantities or large scope of work? Yes Years in Business as Proposing Company Years in business as proposing company? Resellers: Does the vendor have resellers that it will name under this contract? Resellers are defined as other companies that sell your products under an agreement with you, the awarded vendor of TIPS. EXAMPLE: BIGmart is a reseller of ACME brand televisions. If ACME were a TIPS awarded vendor, then ACME would list BIGmart as a reseller. (If applicable, Vendor should add all Authorized Resellers within the TIPS Vendor Portal upon award). No

  • Discount Rates The discount rates applied to <<customer_name>> purchases of BellSouth Telecommunications Services for the purpose of resale shall be as set forth in Exhibit A. Such discounts have been determined by the applicable Commission to reflect the costs avoided by BellSouth when selling a service for wholesale purposes.

  • Early Payment Discount The City of Houston’s standard payment term is to pay 30 days after receipt of invoice or receipt of goods or services, whichever is later, according to the requirements of the Texas Prompt Payment Act (Tex. Gov’t Code, Ch. 2251). However, the City will pay in less than 30 days in return for an early payment discount from Contractor as follows: Payment Time - 10 Days: 2% Discount Payment Time - 20 Days: 1% Discount

  • PAYMENT TERMS/DISCOUNTS The County’s payment terms are in accordance with Florida Statute 218, Local Government Prompt Payment Act. Cash discounts for prompt payment shall not be considered in determining the lowest net cost for bid evaluation purposes.

  • APPLICABLE DISCOUNTS The telecommunications services available for purchase by <<customer_name>> for the purposes of resale to <<customer_name>> End Users shall be available at the following discount off of the retail rate. If <<customer_name>> cancels an order for telecommunications services for the purpose of resale, any costs incurred by BellSouth in conjunction with the provisioning of that order will be recovered in accordance with the applicable sections of the GSST and the PLST. DISCOUNT* STATE RESIDENCE BUSINESS CSAs*** ALABAMA 16.3% 16.3% FLORIDA 21.83% 16.81% GEORGIA 20.3% 17.3% KENTUCKY 16.79% 15.54% LOUISIANA 20.72% 20.72% 9.05% MISSISSIPPI 15.75% 15.75% NORTH CAROLINA 21.5% 17.6% SOUTH CAROLINA 14.8% 14.8% 8.98% TENNESSEE** 16% 16% * When a CLEC provides Resale service in a cross boundary area (areas that are part of the local serving area of another state’s exchange) the rates, regulations and discounts for the tariffing state will apply. Billing will be from the serving state. ** In Tennessee, if <<customer_name>> provides its own operator services and directory services, the discount shall be 21.56%. <<customer_name>> must provide written notification to BellSouth within 30 days prior to providing its own operator services and directory services to qualify for the higher discount rate of 21.56%. *** Unless noted in this column, the discount for Business will be the applicable discount rate for CSAs. OPERATIONAL SUPPORT SYSTEMS (OSS) RATES BellSouth has developed and made available the following mechanized systems by which <<customer_name>> may submit LSRs electronically. LENS Local Exchange Navigation System EDI Electronic Data Interchange TAG Telecommunications Access Gateway LSRs submitted by means of one of these interactive interfaces will incur an OSS electronic ordering charge as specified in the Table below. An individual LSR will be identified for billing purposes by its Purchase Order Number (PON). LSRs submitted by means other than one of these interactive interfaces (mail, fax, courier, etc.) will incur a manual order charge as specified in the table below: OPERATIONAL SUPPORT SYSTEMS (OSS) RATES Electronic Per LSR received from the CLEC by one of the OSS interactive interfaces Manual Per LSR received from the CLEC by means other than one of the OSS interactive interfaces OSS LSR Charge $3.50 $19.99

  • Volume and Additional Discounts In addition to the Part 1 Minimum Percentage Discount proposed herein, does Vendor ever expect and intend to offer additional, greater, or volume discounts to TIPS Members? If proposing on Part 1, point(s) may be assigned for your response in the Part 1 category of "Pricing" during scoring and evaluation. If you are not proposing on Part 1, you must respond to proceed but no points will be assigned for your response. 8 Yes

  • PROMPT PAYMENT DISCOUNTS If a Contractor offers a discount for prompt payment, the Contractor shall include the terms of the discount on all invoices, the amounts which are due if the Authorized User meets the terms, and the number of days for which the prompt payment discount offer applies.

  • Average Log Length and Payment Reduction If the average log length for all logs delivered under this contract is less than the average log length specified in the table in clause G-024.2, The amount of allowable payment reduction shall be calculated by multiplying the payment rate in P-028.2 by the total volume delivered, and the difference between the average length of logs delivered and the average log length specified in G-024.2, times 1% as follows: Log Length Payment Reduction = (B x V x L) x (.01) 1/10th) Where: B = Bid rate from P-028.2 clause V = total delivered log Volume L = Length in feet below specified average (rounded to nearest Average log length payment reductions calculated by the Purchaser must be approved by the State, prior to payment for the final billing period. Third-party scaling organization information is required to determine Xxxxxxxx mbf and Average log length for payment reduction purposes. Average log length is determined on a piece count basis. Value of log length price reduction will be derived from the applicable sort value as described in this contract. Scale information for determining Average log length for payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for below average log lengths shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.

Time is Money Join Law Insider Premium to draft better contracts faster.