Elements of a Regional Reliability Standard Sample Clauses

Elements of a Regional Reliability Standard. To ensure uniformity of regional reliability standards, an ERCOT-Specific Reliability Standard shall consist of the elements identified in this section of the procedure. These elements are intended to apply a systematic discipline in the development and revision of standards. This discipline is necessary to achieving standards that are measurable, enforceable, and consistent. All mandatory requirements of a regional reliability standard shall be within the standard. Supporting documents to aid in the implementation of a standard may be referenced by the standard but are not part of the standard itself. Table 1 ⎯ Performance Elements of a Regional Reliability Standard Identification Number A unique identification number assigned in accordance with an administrative classification system to facilitate tracking and reference. Title A brief, descriptive phrase identifying the topic of the standard. Applicability Clear identification of the functional classes of entities responsible for complying with the standard, noting any specific additions or exceptions. If not applicable to the entire Texas RE area, then a clear identification of the portion of the bulk power system to which the standard applies. Any limitation on the applicability of the standard based on electric facility requirements should be described. Effective Date and Status The effective date of the standard or, prior to approval of the standard, the proposed effective date. Purpose The purpose of the standard. The purpose shall explicitly state what outcome will be achieved or is expected by this standard. Requirement(s) Explicitly stated technical, performance, and preparedness requirements. Each requirement identifies what entity is responsible and what action is to be performed or what outcome is to be achieved. Each statement in the requirements section shall be a statement for which compliance is mandatory.
Sample 1
AutoNDA by SimpleDocs
Elements of a Regional Reliability Standard. An RE Standard shall consist of the elements identified in this section of this manual. These elements are intended to apply a systematic discipline in the development and revision of Standards. This discipline is necessary to achieve standards that are measurable, enforceable, and consistent. The format allows a clear statement of the purpose, requirements, measures, and penalties for non-compliance associated with each Standard. Supporting documents to aid in the implementation of a Standard may be referenced by the Standard but are not part of the Standard itself. All mandatory requirements of a Standard shall be within an element of the standard. Identification Number A unique identification number assigned in accordance with an administrative classification system to facilitate tracking and reference RE documentation. Format for Regional Standard Request will be: RSR-000 Title A brief, descriptive phrase identifying the topic of the Standard. Effective Date and Status The effective date of the Standard or, prior to adoption of the Standard by the RE through its own processes, the proposed effective date. The status of the standard will be indicated as active or by reference to one of the numbered steps in the standards process. Purpose The purpose of the Standard. The purpose shall explicitly state what outcome will be achieved or is expected by this Standard. The purpose is agreed to early in the process as a step toward obtaining approval to proceed with the development of the standard. The purpose should link the standard to the relevant principle(s). Requirement(s) Explicitly stated technical, performance, and preparedness requirements. Each requirement identifies the responsible entity and the action to be performed or outcome to be achieved. Each statement in the requirements section shall be a statement for which compliance is mandatory. Any additional comments or statements for which compliance is not mandatory such as background or explanatory information should be placed in a separate document and referenced. (See Supporting References). Applicability Clear identification of the functional classes of entities responsible for complying with the standard, noting any specific additions or exceptions. If not applicable to the entire SPP area, then a clear identification of the portion of the bulk power system to which the standard applies. Any limitation on the applicability of the standard based on electric facility requirements should be descr...
Sample 1

Related to Elements of a Regional Reliability Standard

  • Quality Standards Each Party agrees that the nature and quality of its products and services supplied in connection with the other Party's Marks will conform to quality standards set by the other Party. Each Party agrees to supply the other Party, upon request, with a reasonable number of samples of any Materials publicly disseminated by such Party which utilize the other Party's Marks. Each Party will comply with all applicable laws, regulations, and customs and obtain any required government approvals pertaining to use of the other Party's marks.

  • Service Level Standards In addition to all other requirements in this Agreement, and in accordance with the Best Claims Practices & Estimating Guidelines, Vendor shall use reasonable and good faith efforts to meet the Service Level Standards set forth below.

  • Compliance with Accessibility Standards All parties to this Agreement shall ensure that the plans for and the construction of all projects subject to this Agreement are in compliance with standards issued or approved by the Texas Department of Licensing and Regulation (TDLR) as meeting or consistent with minimum accessibility requirements of the Americans with Disabilities Act (P.L. 101-336) (ADA).

  • Reliability Reliability targets (Mean Time Between Failures (MTBF)) are defined in the technical specifications as set out in the Contract. Notwithstanding any possible application of penalties relating to reliability defined in the Contract, Goods shall remain covered by the warranty defined in this Article 16 as long as the reliability commitments have not been reached.

  • Safety Standards Performance of the Contract for all commodities or contractual services must comply with requirements of the Occupational Safety and Health Act and other applicable State of Florida and federal requirements.

  • Minimum Standard of Treatment 1. Each Party shall accord to a covered investment treatment in accordance with the customary international law minimum standard of treatment of aliens, including fair and equitable treatment and full protection and security. 2. The concepts of “fair and equitable treatment” and “full protection and security” in paragraph 1 do not require treatment in addition to or beyond that which is required by the customary international law minimum standard of treatment of aliens. 3. A breach of another provision of this Agreement, or of a separate international agreement, does not establish that there has been a breach of this Article.

  • Financial Viability and Regulatory Compliance 2.6.1 Contractor warrants and represents that its corporate entity is in good standing with all applicable federal, state, and local licensing authorities and that it possesses all requisite licenses to perform the services required by this contract. Contractor further warrants and represents that it owes no outstanding delinquent federal, state or local taxes or business assessments. 2.6.2 Contractor agrees to promptly disclose to the MPHA any IRS liens or licensure suspension or revocation that may adversely affect its capacity to perform the services outlined within this contract. The failure by Contractor to disclose such issue to the MPHA in writing within 5 days of such notification received will constitute a material breach of this contract. 2.6.3 Contractor further agrees to promptly disclose to the MPHA any change of more than 50% of its ownership and/or any declaration of bankruptcy that Contractor may undergo during the term(s) of this contract. The failure of Contractor to disclose any change of more than 50% of its ownership and/or its declaration of bankruptcy within 5 days of said actions shall constitute a material breach of this contract. 2.6.4 All disclosures made pursuant to this section of the contract shall be made in writing and submitted to MPHA within the time periods required herein.

  • Quality Service Standards Price Services and the Fund may from time to time agree to certain quality service standards, as well as incentives and penalties with respect to Price Services’ Services hereunder.

  • UTILITIES AND SERVICE 7.1 It is the intent of the parties that Tenant shall assume all responsibility for the operation and maintenance of the Premises. Therefore, notwithstanding anything in the Lease to the contrary, during the term of this Lease, the following utilities and services will be provided on the premises: (a) Tenant will provide Electricity, water and sewer service, since the services are billed to the Landlord, the Tenant will pay a monthly sum ( ) subject to annual review based upon the average usage the previous year. (b) The Landlord shall provide heat to such extent and to such levels as, in the Landlord’s judgment, is reasonably required for the comfortable use and occupancy of the Premises. (c) Tenant will provide landscaping and grounds keeping to the common areas and Premises. 7.2 Tenant shall, at its own costs, provide custodial and janitorial service to the Premises. 7.3 Tenant shall arrange for and shall pay the entire cost and expense of all telephone stations, equipment and use charges, electric light bulbs and all other materials and services not expressly required to be provided and paid by Landlord pursuant to the provisions of this Section 7. 7.4 Tenant shall not, without the written consent of Landlord, use any apparatus or device on the Premises (including, but without limitation thereto, electronic data processing machines, punch card machines or machines using current in excess of 110 volts) which will in any way increase the amount of electricity or water usually supplied at the Premises. Tenant shall not connect with electrical current, except through existing electrical outlets in the Premises. If Tenant requires water or electric current in excess of that usually supplied at the Premises, Tenant shall first procure the written consent of Landlord for the use thereof. Landlord may cause a water meter or electric current meter to be installed in the Premises. The cost of such meters and of installation, maintenance, and repair thereof shall be paid by Tenant. Xxxxxx further agrees to pay Landlord promptly upon demand for all such water and electric current consumed at the rates charged for such services by the City of Xxxxxxx or the local public utility, plus any additional expense incurred by Landlord in keeping account of the water and electric current so consumed. 7.5 Landlord shall not be liable for and Tenant shall not be entitled to terminate this Lease or to effectuate any abatement or reduction of rent by reason of Landlord’s failure to provide or furnish any of the foregoing utilities or services unless such failure was due to the gross negligence or intentional misconduct of Landlord. Landlord shall not be liable for loss or injury to persons or property, however arising, occurring in connection with or attributable to any failure to furnish such utilities or services, unless and only to the extent due to the gross negligence or intentional misconduct of Landlord, and in no event shall Landlord be liable for Tenant’s consequential damages. 7.6 Landlord shall be responsible for repairs of the major mechanical system, such as the boiler, HVAC and electrical system, and “Building Envelope”, such as the roof, foundation, walls and other structural components of the Building. Tenant shall be responsible for routine operation, maintenance and repairs of the Premises. A major repair to a system is one which exceeds $10,000 in a twelve month period. In the event when a major mechanical or building system failure is too costly to be repaired, if so deemed by the Landlord, and if neither Landlord or Tenant is willing or able to remedy the situation, either party can cancel this Lease. 7.7 Landlord shall not be responsible for any loss caused to Tenant by Xxxxxxxx’s failure to make any major repairs. The District’s priority and scheduling may push these repairs out several years.

  • Standards Compliance Registry Operator shall comply with relevant existing RFCs and those published in the future by the Internet Engineering Task Force (IETF), including all successor standards, modifications or additions thereto relating to the DNS and name server operations including without limitation RFCs 1034, 1035, 1123, 1982, 2181, 2182, 2671, 3226, 3596, 3597, 4343, and 5966. DNS labels may only include hyphens in the third and fourth position if they represent valid IDNs (as specified above) in their ASCII encoding (e.g., “xn--ndk061n”).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!