Functionality Limitations Sample Clauses

Functionality Limitations. The Markforged Technology consists of commercial professional tools intended to be used by trained professionals only. The Markforged Technology is intended only to assist Customer with Customer’s design, analysis, simulation, estimation, testing and/or other activities and are not a substitute for Customer’s own independent design, analysis, simulation, estimation, testing, and/or other activities, including those with respect to product stress, safety and utility. Due to the large variety of potential applications for the Markforged Technology, the Markforged Technology has not been tested in all situations under which it may be used. MARKFORGED WILL NOT BE LIABLE IN ANY MANNER WHATSOEVER FOR THE RESULTS OBTAINED THROUGH USE OF THE MARKFORGED TECHNOLOGY.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Functionality Limitations. Computer-aided design software and other technical software are tools intended to be used by trained professionals only. They are not substitutes for Customer’s professional judgment. Computer-aided design software and other technical software are intended to assist with product design and are not substitutes for independent design analysis, estimation or testing for product stress, safety and utility. Due to the large variety of potential applications for the Software, the Software has not been tested in all situations under which it may be used. SISW shall not be liable in any manner whatsoever for the results obtained through the use of the Software. Persons using the Software are responsible for the supervision, management and control of the Software. This responsibility includes, but is not limited to, the determination of appropriate uses for the Software and the selection of the Software and other programs to achieve intended results. Persons using the Software are also responsible for establishing the adequacy of independent procedures for testing the reliability and accuracy of any program output, including all items designed by using the Software.
Sample 1
Functionality Limitations. The Supplier Software, documentation and services are commercial professional tools intended to be used by trained professionals only. Particularly in the case of commercial professional use, the Supplier Software, documentation and services are not a substitute for your professional judgment or independent testing. The Supplier Software, documentation and services are intended only to assist you with design, analysis, simulation, estimation, testing and/or other activities and are not a substitute for your own independent design, analysis, simulation, estimation, testing, and/or other activities, including those with respect to product stress, safety and utility. Due to the large variety of potential applications for the Supplier Software, documentation and services, the Supplier Software, documentation and services have not been tested in all situations under which they may be used. Supplier will not be liable in any manner whatsoever for the results obtained through use of the Supplier Software, documentation and services. Person using the Supplier Software, documentation and services are responsible for the supervision, management, and control of the Supplier Software, documentation and services and the results of using the Supplier Software, documentation and services. This responsibility includes, without limitation, the determination of appropriate uses for the Supplier Software, documentation and services and the selection of the Supplier Software, documentation and services and other computer programs and materials to help achieve intended results. Person using the Supplier Software, documentation and services are also responsible for establishing the adequacy of independent procedures for testing the reliability, accuracy, completeness, and other characteristics of any output of the Supplier Software, documentation and services, including, without limitation, all items designed with the assistance of the Supplier Software, documentation and services. You further acknowledges and agrees that the Software form part of your total unique hardware and software environment to deliver specific functionality, and that the Supplier Software, documentation and services provided by Supplier may not achieve the results you desires within your design, analysis, simulation, estimation, and/or testing constraints.
Sample 1
Functionality Limitations. COMPUTER-AIDED DESIGN SOFTWARE AND OTHER TECHNICAL SOFTWARE ARE TOOLS INTENDED TO BE USED BY TRAINED PROFESSIONALS ONLY. THEY ARE NOT SUBSTITUTES FOR PROFESSIONAL JUDGMENT. COMPUTER-AIDED DESIGN SOFTWARE AND OTHER TECHNICAL SOFTWARE ARE INTENDED TO ASSIST WITH PRODUCT DESIGN AND ARE NOT SUBSTITUTES FOR INDEPENDENT TESTING OF PRODUCT STRESS, SAFETY AND UTILITY. DUE TO THE LARGE VARIETY OF POTENTIAL APPLICATIONS FOR THE SOFTWARE, THE SOFTWARE HAS NOT BEEN TESTED IN ALL SITUATIONS UNDER WHICH IT MAY BE USED. AUTODESK SHALL NOT BE LIABLE IN ANY MANNER WHATSOEVER FOR THE RESULTS OBTAINED THROUGH THE USE OF THE SOFTWARE. PERSONS USING THE SOFTWARE ARE RESPONSIBLE FOR THE SUPERVISION, MANAGEMENT AND CONTROL OF THE SOFTWARE. THIS RESPONSIBILITY INCLUDES, BUT IS NOT LIMITED TO, THE DETERMINATION OF APPROPRIATE USES FOR THE SOFTWARE AND THE SELECTION OF THE SOFTWARE AND OTHER PROGRAMS TO ACHIEVE INTENDED RESULTS. PERSONS USING THE SOFTWARE ARE ALSO RESPONSIBLE FOR ESTABLISHING THE ADEQUACY OF INDEPENDENT PROCEDURES FOR TESTING THE RELIABILITY AND ACCURACY OF ANY PROGRAM OUTPUT, INCLUDING ALL ITEMS DESIGNED BY USING THE SOFTWARE. Educational Versions. WORK PRODUCT AND OTHER DATA CREATED WITH EDUCATIONAL PRODUCTS CONTAINS CERTAIN NOTICES AND LIMITATIONS THAT MAKE THE DATA UNUSABLE OUTSIDE THE EDUCATIONAL USE AREA. IF YOU COMBINE OR LINK DATA CREATED WITH THE SOFTWARE WITH DATA OTHERWISE CREATED, THEN SUCH OTHER DATA MAY ALSO BE AFFECTED BY THESE LIMITATIONS.
Sample 1
Functionality Limitations. The Licensed Software consists of commercial professional tools intended to be used by trained professionals only. Particularly in the case of commercial professional use, the Licensed Software is not a substitute for Licensee’s professional judgment or independent testing. The Licensed Software is intended only to assist Licensee with its design, analysis, simulation, estimation, testing and/or other activities and are not a substitute for Licensee’s own independent design, analysis, simulation, estimation, testing, and/or other activities, including those with respect to product stress, safety and utility. Due to the large variety of potential applications for the Licensed Software, the Licensed Software has not been tested in all situations under which it may be used. Autodesk will not be liable in any manner whatsoever for the results obtained through use of the Licensed Software. Persons using the Licensed Software are responsible for the supervision, management, and control of the Licensed Software and the results of using the Licensed Software. This responsibility includes, without limitation, the determination of appropriate uses for the Licensed Software and the selection of the Licensed Software and other computer programs and materials to help achieve intended results. Persons using the Licensed Software are also responsible for establishing the adequacy of independent procedures for testing the reliability, accuracy, completeness, and other characteristics of any output of the Licensed Software, including, without limitation, all items designed with the assistance of the Licensed Software. Licensee further acknowledges and agrees that the Licensed Software, and any Software Application derived from the Licensed Software, form part of Licensee’s total unique hardware and software environment to deliver specific functionality, and that the Licensed Software provided by Autodesk may not achieve the results Licensee desires within Licensee’s design, analysis, simulation, estimation, and/or testing constraints.
Sample 1
Functionality Limitations. The Software purchased pursuant to an Educational License has functionality limitations. For Software with full functionality, Licensee must purchase either a Professional/Commercial License or Professional/Academic License.
Sample 1
Functionality Limitations. The limited version of the Software pursuant to a Free License has functionality limitations. For full functionality of the Software, Licensee must purchase either a Professional/Commercial License or Professional/Academic License.
Sample 1
AutoNDA by SimpleDocs

Related to Functionality Limitations

  • Warranty Limitations This Contractual Warranty does not warrant uninterrupted or error-free operation of the Product or cover normal wear and tear of the Product or costs related to the removal, installation, or troubleshooting of the customer's electrical systems. The warranty claims that relate to defects caused by any of the following factors are not covered by the Contractual Warranty: • Improper Use or Non-compliance with installation, commissioning, operation or maintenance instructions (i.e. not according to the operation & installation manual) • Unauthorized modifications, changes or attempted repairs, • Vandalism, destruction through external influence and/or persons/animals • Use in an unsuitable environment, including any environment or location that causes excessive wear and tear or dirt or dust or debris buildup within the system or that is difficult or unsafe for Xantrex LLC representatives to access • Insufficient ventilation • Installation in a corrosive environment • Failure to observe applicable safety standards & regulations • Damages during transportation or storage • Force majeure, examples include, but not limited to: fire, flood, earthquakes, storm damage, overvoltage & lightning strikes • Exposure to fire, water, snow, moisture, or liquid ingress (except for any such exposure to environmental conditions that your Product was specifically designed to withstand as indicated in the applicable specifications for your Product) • Used as a component part of a product expressly warranted by another manufacturer • If the original identification (trade-mark, serial number) markings have been defaced, altered, or removed • Consumable components of any type are not covered, including but not limited to fans, fuses and filters etc. • Cosmetic shortcoming which do not impair the use of the product for the intended purpose i.e. supply of energy Warranty claims also exclude: • Damages arising due to the fact that the use of the product for the intended purpose is no longer possible or only possible with restrictions as a result of amendments to the statutory provisions applicable to the operation of the product made after the delivery of the product • Compensation for damages related to loss of power production or business operation or any expenses incurred by customer towards repair & replacement of the product (including but not limited to labor, transportation, temporary power) • Cost arising from changes to existing PV systems or building installations or vehicle or marine vessel installation and like • Additional costs and expenses (i.e. shipping costs, travel, accommodation, meals, etc.) arising due to remote locations of the indicated geographies, including but not limited to islands and overseas territories

  • Service Limitations The FCC requires that Provider provide E911 Service to all Customers who use Provider Services within the United States. Sections 13.2-13.8 apply to all Customers who use Provider Services within the United States. Section 13.9 applies to all Customers.

  • Usage Limitations You shall use best efforts to ensure that only Authorized Customer Support Users are provided access to the Service Desk Infrastructure and Student Support Services, including not causing or permitting third parties to access such infrastructure or services.

  • Functionality Customer is entitled to additional functionality previously purchased or bundled with the software if available in the version or update released on or after the start date of the Agreement. Customer acknowledges that certain functionality in current and previous software versions may not be available in future upgrades. Added functionality may require additional paid services (clinical and technical) to configure and support.

  • General specifications 6.1.1. A vehicle and its electrical/electronic system(s) or ESA(s) shall be so designed, constructed and fitted as to enable the vehicle, in normal conditions of use, to comply with the requirements of this Regulation.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Liability Limitations This paragraph limits the liabilities arising under this Agreement or any SOW and is a bargained-for and material part of our business relationship with you. You acknowledge and agree that Verticomm would not enter into any SOW or this Agreement unless Verticomm could rely on the limitations described in this paragraph. In no event shall either party be liable for any indirect, special, exemplary, consequential, or punitive damages, such as lost revenue, loss of profits (except for fees due and owing to Verticomm), savings, or other indirect or contingent event-based economic loss arising out of or in connection with this Agreement, any SOW, or the Services, or for any loss or interruption of data, technology or services, or for any breach hereof or for any damages caused by any delay in furnishing Services under this Agreement or any SOW, even if a party has been advised of the possibility of such damages; however, reasonable attorneys’ fees awarded to a prevailing party (as described below), your indemnification obligations, and any amounts due and payable pursuant to the non-solicitation provision of this Agreement shall not be limited by the foregoing limitation. Except for the foregoing exceptions, a responsible party’s (“Responsible Party’s”) aggregate liability to the other party (“Aggrieved Party”) for damages from any and all claims or causes whatsoever, and regardless of the form of any such action(s), that arise from or relate to this Agreement (collectively, “Claims”), whether in contract, tort, indemnification, or negligence, shall be limited solely to the amount of the Aggrieved Party’s actual and direct damages, not to exceed the amount of fees paid by you (excluding hard costs for licenses, hardware, etc.) to Verticomm for the specific Service upon which the applicable claim(s) is/are based during the three (3) month period immediately prior to the date on which the cause of action accrued. The foregoing limitations shall not apply to the extent that the Claims are caused by a Responsible Party’s willful or intentional misconduct, or gross negligence. Similarly, a Responsible Party’s liability obligation shall be reduced to the extent that a Claim is caused by, or the result of, the Aggrieved Party’s willful or intentional misconduct, or gross negligence.

  • Switching and Tagging Rules Each Party shall provide the other Parties a copy of its switching and tagging rules that are applicable to the other Parties’ activities. Such switching and tagging rules shall be developed on a non-discriminatory basis. The Parties shall comply with applicable switching and tagging rules, as amended from time to time, in obtaining clearances for work or for switching operations on equipment.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!