INSPECTION OF COMPONENTS Sample Clauses

INSPECTION OF COMPONENTS. In the event that the Inspector is asked by the Client to re-inspect a component or condition that has been repaired, the Inspector’s scope of re-inspection will be limited to the components or conditions identified. The Inspector will not be responsible for any changed conditions in other components or conditions since the date of the original Inspection. Any re-inspection of repaired components or conditions will not determine if the repair is adequate, proper, or compliant with current building codes. Any re-inspection will only determine if visually identifiable deficiencies still exist.
Sample 1Sample 2Sample 3See All (5)
INSPECTION OF COMPONENTS. In the event that the Inspector is asked by the Client to re-inspect a component or condition that has been repaired, the Inspector’s scope of re-inspection will be limited to the components or conditions identified. The Inspector will not be responsible for any changed conditions in other components or conditions since the date of the original Inspection. Any re-inspection of repaired components or conditions will not determine if the repair is adequate, proper, or compliant with current building codes. Any re-inspection will only determine if visually identifiable deficiencies still exist. THE CLIENT AGREES AND UNDERSTANDS THAT THE INSPECTOR IS NOT AN INSURER AND IS NOT WARRANTING OR GUARANTEEING THE ADEQUACY, PERFORMANCE, OR LIFE EXPECTANCY OF ANY STRUCTURE, ITEM, COMPONENT, OR SYSTEM OF THE PROPERTY. THE CLIENT FURTHER AGREES THAT, IF THE INSPECTOR OR ANY OF THE INSPECTOR’S AGENTS, EMPLOYEES, SUBCONTRACTORS, OFFICERS, OR SHAREHOLDERS ARE FOUND LIABLE FOR ANY LOSS OR DAMAGE DUE TO NEGLIGENCE OR THE FAILURE TO PERFORM THE INSPECTOR’S OBLIGATIONS IN THIS AGREEMENT, INCLUDING THE IMPROPER OR NEGLIGENT PERFORMANCE OF THE INSPECTION OR THE IMPROPER OR NEGLIGENT REPORTING OF CONDITIONS OF THE PROPERTY, THE INSPECTOR’S MAXIMUM LIABILITY SHALL BE LIMITED TO TWICE THE AMOUNT OF THE PAID INSPECTION FEE. THIS LIMITATION SHALL NOT APPLY TO ANY DAMAGES SPECIFICALLY ALLOWED BY STATUTE. THIS LIMITATION OF LIABILITY SPECIFICALLY COVERS LIABILITY FOR: DAMAGED PROPERTY, LOSS OF USE OF THE PROPERTY, LOST PROFITS, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INCIDENTAL DAMAGES, GOVERNMENTAL FINES AND CHARGES, PUNITIVE DAMAGES, ATTORNEY’S FEES, AND COURT COSTS. AT THE CLIENT’S OPTION, A COMPREHENSIVE INSPECTION WITHOUT LIMITATION OF LIABILITY IS AVAILABLE. A COMPREHENSIVE INSPECTION INCLUDES A CONTRACTOR, ENGINEER, AND ARCHITECT REVIEWING THE PROPERTY FOR A MINIMUM FEE OF $2,500 (REQUIRES QUOTE). A COMPREHENSIVE INSPECTION REQUIRES A SEPARATE CONTRACT. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO ANY DAMAGES CAUSED BY THE GROSS NEGLIGENCE OF THE INSPECTOR IN THE PERFORMANCE OF THE INSPECTOR’S OBLIGATIONS IN THIS AGREEMENT. Any controversy or claim arising out of or relating to this Agreement shall be resolved through Small Claims Court (or similar court of limited monetary jurisdiction) in the jurisdiction applicable to this Agreement. In the event that the amount in dispute exceeds the jurisdiction of the applicable Small Claims Court, the dispute shall be settled by binding...
Sample 1Sample 2
INSPECTION OF COMPONENTS. In the event that the Inspector is asked by the Client to re-inspect a component or condition that has been repaired, the Inspector’s scope of re-inspection will be limited to the components or conditions identified. The Inspector will not be responsible for any changed conditions in other components or conditions since the THE FOLLOWING CLAUSE LIMITS THE LIABILITY OF THE INSPECTOR – PLEASE READ CAREFULLY
Sample 1
INSPECTION OF COMPONENTS. Supplier shall inspect Components for material defects and non- conformities in accordance with a mutually agreed written control plan. Supplier shall notify Company if it identifies potential beneficial modifications of the inspection procedures within the control plan, which modifications will be subject to the Engineering Change process in Section 9. The Parties shall mutually agree upon reporting criteria for Component defects and non-conformities identified by Supplier.
Sample 1

Related to INSPECTION OF COMPONENTS

  • Quality of Materials and workmanship The Contractor shall ensure that the Construction, Materials and workmanship are in accordance with the requirements specified in this Agreement, Specifications and Standards and Good Industry Practice.

  • Review of Materials During the term of this Agreement, Client shall ensure that all prospectuses, statements of additional information, registration statements, proxy statements, reports to shareholders, advertising and sales literature or other materials prepared for distribution to Fund shareholders or the public, which refer to the Subadviser in any way, prepared by employees or agents of Client or its affiliates are consistent with information previously provided by Subadviser. Subadviser shall promptly notify the Client of any changes to information pertaining to the Subadviser and stated in the materials described in this Section 6(g).

  • Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.

  • Supply of Materials The following materials will be supplied by the department Name of Materials Rate. Place of delivery 1.

  • Inspection and Tests 3.8.1 The Procuring entity or its representative shall have the right to inspect and/or to test the goods to confirm their conformity to the Contract specifications. The Procuring entity shall notify the tenderer in writing in a timely manner, of the identity of any representatives retained for these purposes. 3.8.2 The inspections and tests may be conducted in the premises of the tenderer or its subcontractor(s), at point of delivery, and/or at the Goods’ final destination If conducted on the premises of the tenderer or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring entity. 3.8.3 Should any inspected or tested goods fail to conform to the Specifications, the Procuring entity may reject the equipment, and the tenderer shall either replace the rejected equipment or make alterations necessary to make specification requirements free of costs to the Procuring entity. 3.8.4 The Procuring entity’s right to inspect, test and where necessary, reject the goods after the Goods’ arrival shall in no way be limited or waived by reason of the equipment having previously been inspected, tested and passed by the Procuring entity or its representative prior to the equipment delivery. 3.8.5 Nothing in paragraph 3.8 shall in any way release the tenderer from any warranty or other obligations under this Contract.

  • Inspection of Work CONSULTANT and any subconsultant shall permit LOCAL AGENCY, the State, and the FHWA if federal participating funds are used in this AGREEMENT; to review and inspect the project activities and files at all reasonable times during the performance period of this AGREEMENT.

  • Inspection and Rejection of Nonconforming Goods The Buyer has the right to inspect the Goods on or after the Delivery Date. Buyer, at its sole option, may inspect all or a sample of the Goods, and may reject all or any portion of the Goods if it determines the Goods are nonconforming or defective. If Buyer rejects any portion of the Goods, Buyer has the right, effective upon written notice to Seller, to: (a) rescind the Order in its entirety; (b) accept the Goods at a reasonably reduced price; or (c) reject the Goods and require replacement of the rejected Goods. If Buyer requires replacement of the Goods, Seller shall, at its expense, promptly replace the nonconforming Goods and pay for all related expenses, including, but not limited to, transportation charges for the return of the defective goods and the delivery of replacement Goods. If Seller fails to timely deliver replacement Goods, Buyer may replace them with goods from a third party and charge Seller the cost thereof and terminate this Order for cause pursuant to Section 19. Any inspection or other action by Buyer under this Section shall not reduce or otherwise affect Seller's obligations under the Order, and Buyer shall have the right to conduct further inspections after Seller has carried out its remedial actions.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Technical Feasibility of String While ICANN has encouraged and will continue to encourage universal acceptance of all top-­‐level domain strings across the Internet, certain top-­‐level domain strings may encounter difficulty in acceptance by ISPs and webhosters and/or validation by web applications. Registry Operator shall be responsible for ensuring to its satisfaction the technical feasibility of the TLD string prior to entering into this Agreement.

  • Removal of Materials If you decide you would like to remove your Materials from the Service, you may provide written notice to Prime Publishing by either deleting the image through the Prime Publishing interface or by contacting Prime Publishing customer service, and Prime Publishing will remove such Materials from the Service within a reasonable period of time. 5) License for Name, Trademarks and Likenesses. You hereby grant to Prime Publishing, its Affiliates and sublicensees a nonexclusive, worldwide, royalty-free license to use all trademarks, trade names, and the names and likenesses of any individuals that appear in the Materials. You grant Prime Publishing, its Affiliates and sublicensees the right to use the name that you submit in connection with the Materials. 6) Specifications and Guidelines. You agree to submit Materials to us in accordance with all guidelines for use of the Service posted on the Prime Publishing web site or of which you are otherwise notified ("Guidelines"), as these Guidelines may be changed in the future. 7)