DEPENDENT PERSONAL SERVICES 1. Subject to the provisions of Articles 16, 18 and 19, salaries, wages and other similar remuneration derived by a resident of a Contracting State in respect of an employment shall be taxable only in that State unless the employment is exercised in the other Contracting State. If the employment is so exercised, such remuneration as is derived therefrom may be taxed in that other State.
2. Notwithstanding the provisions of paragraph 1, remuneration derived by a resident of a Contracting State in respect of an employment exercised in the other Contracting State shall be taxable only in the first-mentioned State if:
a) the recipient is present in the other State for a period or periods not exceeding in the aggregate 183 days in any twelve-month period commencing or ending in the tax year concerned, and
b) the remuneration is paid by, or on behalf of, an employer who is not a resident of the other State, and
c) the remuneration is not borne by a permanent establishment or a fixed base which the employer has in the other State.
3. Notwithstanding the preceding provisions of this Article, remuneration derived in respect of an employment exercised aboard a ship or aircraft operated in international traffic by a resident of a Contracting State, may be taxed in that State.
Bargaining Unit Roster The County will transmit to the Union a current listing
Principal Personnel The management of the Bidder company who make operational decisions. Proposed Price – The Vendor’s maximum hourly rate for an associated Job Title or Scope Variant for the initial and renewal term. A “not to exceed” price. Scope Variant – A gradation of experience within a Job Title. Staff – The temporary staff provided by the Contractor or Contractor’s subcontractor(s) to render information technology services identified by Customers. State – The State of Florida.
New Employee Orientation The Union will provide each agency personnel director with the names and addresses of up to two (2) authorized Union representatives per agency to receive notice of each formal orientation meeting held by the Department. The notice will be sent as soon as such meetings are scheduled (but not less than ten (10) days in advance) and will include date, time and location. Due to operational exigencies, agencies may schedule an orientation which will provide the Union with less than the requisite ten (10) days' notice; however the Union shall be notified as soon as possible after the scheduling of the orientation and the Union representative shall be released from duty. Agencies shall routinely schedule orientations in a manner that will allow for the ten (10) day advance notice to the Union. During the formal orientation, the Union will be permitted to give a twenty (20) minute presentation which may include an enrollment in supplemental Union benefits. The parties shall encourage employee attendance, although attendance shall not be mandatory if an employee objects to attending the presentation. In the event a formal orientation meeting is not held, or the Union is unable to attend the formal orientation because the designated Union representatives cannot be released under Article 4, the Employer shall allow the Union representative and the employee(s) to meet during duty hours at a mutually agreed upon time and location for twenty (20) minutes Employee participation in these meetings shall be encouraged although an employee shall not be required to attend such a meeting.
SKILLED TRADES The Company agrees that maintenance employees are engaged to perform wholly maintenance duties, however, they may perform production duties until the set up or repair has been completed. Also, production employees may catty our minor adjustments and repairs. The Company will establish a tool allowance over the lifetime of this agreement of ($210.00 per contract year) to be used as a credit for the purchase of tools deemed necessary or as required by the Company by all Maintenance Men, Maintenance Machinists and Stationary Engineers In the event an employee eligible for a tool allowance terminates their and has exceeded their allowance of per contract year, then such excess will be withheld from their final earnings. Electronic Technician Electrician Maintenance Maintenance Maintenance Stationary Engineer (Chief) Stationary Engineer Pollution Control Operator Maintenance Trainee Oiler and Greaser Mould Cleaner Stores Roving C Remelt Pot Operator Material Handler Scrap Pickup Oxide Mill Operator Acid Tender Janitor Battery Repair Warehouser Stock Picker Circuit Tender Circuit Tender Commercial Re-Charge Operator Starting rate shall be below published job rate. Publishedjob rate to be effective no later than completion of probationary period. A premium of per hour over the published rate for employees designated as a lead hand by the Company. Base Rate Pasting Machine Operator Off-Bearer Paste Mixing Parting Machine Operator Off-Bearer Forming Room Operator Negative On-Bearedoperator Sinker Assembly Foundry Box Developing Operator Packaging Operator Floater of Jobs Element Burner Sinker Intercell Burner Stacking Operator Off-Bearer Stacking Assembly Burner Battery On-Bearer Place Covers & Mix Resin Inverter Resin Operator Saw Parting CLASSIFICATION SKILLED SEMI-SKILLED * * * Electronic Technician Electrician Maintenance Machinist Maintenance Class Maintenance Class Maintenance Trainee Oiler and Greaser * * * Pollution Control Operator Stationary Engineer Chief Stationary Engineer * Mold Cleaner Stores Machine Operator Off-Bearer Paste Mixing Operator Off-Bearer Operator Negative Ovens Circuit Tender On-Bearer Sinker Assembly SKILLED SEMI-SKILLED * * * * * * * * *
Employee Personnel Files 24-1 It is recognized by the parties that the School District may prescribe regulations for the custody, use and preservation of the records, papers, books, documents and property pertaining to the School District. However, to the extent that any records, papers, or other documents covering Employees of the Association do not relate to pre-employment data, every Employee shall be allowed to review the personnel file at any reasonable time upon request. No Employee's request shall be deferred for more than seven (7) School Days for a central office file and no more than two (2) School Days for a site location file excluding weekends and holidays. If any Employee is involved in a grievance regarding matters in the personnel file which may be material, an Association officer or other Association Representative with the written approval of the Employee may also be granted access to the Employee's personnel file at reasonable times where such access is authorized in advance by the Employee. The District shall provide copies of all legally permissible information pertinent to the grievance.
24-2 A copy of each written report, comment, or reprimand concerning an Employee which the School District places in the Employee's personnel file shall be provided that Employee. The Employee must sign the personnel copy of the report, comment, or reprimand as directed as acknowledgment of receipt of a copy of the document. Such signature may not be construed as agreement to the contents of the document. Upon request, an Employee shall be provided, at the prevailing rate per page, a reproduction of any material, excluding any pre-employment documents, in the Employee's file. Unless requested by the Association, such a request may not be made more than one time per year.
24-3 Any written response by the Employee to any written report, comment, or reprimand will also become a part of the Employee's personnel file and will remain a part of said file as long as the report, comment, or reprimand responded to remains a part of the file. In order to insure that the response is not inadvertently overlooked, the Employee will note under his or her signature on the report, comment, or reprimand at the time the response is delivered that a response has been made and the document will be countersigned by the receiving administrator and shall be attached to the supervisor's document. If an Employee desires to make a written response to any written report, comment, or reprimand issued by the Immediate Supervisor or Appropriate Administrator, the Employee's response must be made within twenty (20) days. Upon written request of the Employee, a waiver of the time limits by the Appropriate Administrator, not to exceed twenty (20) days, may be granted, which will not be unreasonably withheld. When a copy of the Immediate Supervisor's or Appropriate Administrator's written document is forwarded to any other location, a copy of the Employee's written response must be attached.
24-4 Upon review of the personnel file, an Employee may respond to documents, comments, or reprimands contained therein that the Employee believes to be inaccurate. The Employee's response shall be directed to the Superintendent's designee. If upon investigation by the Superintendent's designee it is determined that the Employee's response is accurate, the response shall become part of the Employee's personnel file or the comment, document, or reprimand in question may be removed by the Superintendent's designee. The determination as to whether the Employee response is accurate and whether said response shall become part of the Employee's personnel file or the comment, document, or reprimand in question shall be removed are determinations that shall be grievable. The Performance Evaluation Report shall remain a permanent part of the Employee's personnel file. If it is determined that the information contained within the evaluation is not substantiated as factual, the District shall replace the evaluation with a corrected copy.
24-5 It is the School District's intention that work rules, policies, and procedures are to be interpreted and applied uniformly to all Employees under similar circumstances.
Switching and Tagging Rules Each Party shall provide the other Parties a copy of its switching and tagging rules that are applicable to the other Parties’ activities. Such switching and tagging rules shall be developed on a non-discriminatory basis. The Parties shall comply with applicable switching and tagging rules, as amended from time to time, in obtaining clearances for work or for switching operations on equipment.
Non-Medical, Personalized Services The Practice shall also provide Members with the following non-medical services:
B4 Key Personnel The Contractor acknowledges that the Key Personnel are essential to the proper provision of the Services to the Authority.
Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning):
1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises.
2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated.
3. If capacity exists, provide "side-door" porting through the switch.
4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch).
2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases.
2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.
