Trunk Types 2.2.1 In interconnecting their networks pursuant to this Attachment, the Parties will use, as appropriate, the following separate and distinct trunk groups:
2.2.1.1 Interconnection Trunks for the transmission and routing of Reciprocal Compensation Traffic, translated LEC IntraLATA toll free service access code (e.g., 800/888/877) traffic, and IntraLATA Toll Traffic, between their respective Telephone Exchange Service Customers, Tandem Transit Traffic, and, Measured Internet Traffic, all in accordance with Sections 5 through 8 of this Attachment;
2.2.1.2 Access Toll Connecting Trunks for the transmission and routing of Exchange Access traffic, including translated InterLATA toll free service access code (e.g., 800/888/877) traffic, between Ymax Telephone Exchange Service Customers and purchasers of Switched Exchange Access Service via a Verizon access Tandem in accordance with Sections 9 through 11 of this Attachment; and
2.2.1.3 Miscellaneous Trunk Groups as mutually agreed to by the Parties, including, but not limited to: (a) choke trunks for traffic congestion and testing; and, (b) untranslated IntraLATA/InterLATA toll free service access code (e.g. 800/888/877) traffic.
2.2.2 Other types of trunk groups may be used by the Parties as provided in other Attachments to this Agreement (e.g., 911/E911 Trunks) or in other separate agreements between the Parties (e.g., directory assistance trunks, operator services trunks, BLV/BLVI trunks or trunks for 500/555 traffic).
2.2.3 In accordance with the terms of this Agreement, the Parties will deploy One-Way Interconnection Trunks (trunks with traffic going in one direction, including one-way trunks and uni-directional two-way trunks) and/or Two-Way Interconnection Trunks (trunks with traffic going in both directions).
2.2.4 Ymax shall establish, at the technically feasible Point(s) of Interconnection on Verizon’s network in a LATA, separate Interconnection Trunk group(s) between such POI(s) and each Verizon Tandem in a LATA with a subtending End Office(s) to which Ymax originates calls for Verizon to terminate.
2.2.5 In the event the volume of traffic between a Verizon End Office and a technically feasible Point of Interconnection on Verizon’s network in a LATA, which is carried by a Final Tandem Interconnection Trunk group, exceeds (a) the Centium Call Seconds (Hundred Call Seconds) busy hour equivalent of one (1) DS1 at any time; (b) 200,000 minutes of use for a single month; and/or; (c) 600 busy hour Centium Call Seconds (BHCCS) of use for a single month: (i) if One-Way Interconnection Trunks are used, the originating Party shall promptly establish new or augment existing End Office One-Way Interconnection Trunk groups between the Verizon End Office and the technically feasible Point of Interconnection on Verizon’s network; or,
License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license.
(b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
(e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
Links If The Services are made available through the Internet, the Financial Institution’s website may provide links to other websites, including those of Third Parties who may also provide services to You. You acknowledge that all those other websites and Third Party services are independent from the Financial Institution’s and may be subject to separate agreements that govern their use. The Financial Institution and Central 1 have no liability for those other websites or their contents or the use of Third Party services. Links are provided for convenience only, and You assume all risk resulting from accessing or using such other websites or Third Party services.
Media Relations 7.1 Elected officers or appointed committee chairpersons of the Union shall be allowed to speak or comment to the media while on duty provided they change into civilian clothes and provided further, that they do not purport to represent the views of the Department. The Chief's office shall be informed in advance, whenever possible, of such contact with the media. No member shall leave their duty or work station without specific prior approval of the Chief of the Department or authorized management official. Approval shall include consideration of the operating needs and work schedules of the Department or division to which the member is assigned.
Categories of Data Subjects Any individual accessing and/or using the Services through the Customer's account ("Users"); and any individual: (i) whose email address is included in the Customer's Distribution List; (ii) whose information is stored on or collected via the Services, or (iii) to whom Users send emails or otherwise engage or communicate with via the Services (collectively, "Subscribers").
Audio Conferencing In lieu of any other rates and discounts, Customer will pay fixed per-minute per bridge rates ranging from $0.0095 to $0.3200 for the following Conferencing Services: Domestic Audio Conferencing: Fixed per-minute rates per participant for domestic Audio Conferencing calls originating and terminating in the U.S. Mainland, Alaska, Hawaii, Puerto Rico, and the U.S. Virgin Islands, based on method. Instant Replay Plus: Fixed per-minute per-participant rates for Instant Replay Plus usage using toll free number access and toll number access.
Languages 20.1 The Proclamation of Sale, these conditions of sale and the Memorandum may have been translated and published in different forms and languages. In the event of any discrepancy, misstatement, omission or error appearing in the various forms or languages, this English version shall prevail.
ADVERTISERS Any correspondence or business dealings with, or the participation in any promotions of, advertisers located on or through our Services, which may include the payment and/or delivery of such related goods and/or Services, and any such other term, condition, warranty and/or representation associated with such dealings, are and shall be solely between you and any such advertiser. Moreover, you herein agree that Apex Education, Inc. shall not be held responsible or liable for any loss or damage of any nature or manner incurred as a direct result of any such dealings or as a result of the presence of such advertisers on our website. Either Apex Education, Inc. or any third parties may provide links to other websites and/or resources. Thus, you acknowledge and agree that we are not responsible for the availability of any such external sites or resources, and as such, we do not endorse nor are we responsible or liable for any content, products, advertising or any other materials, on or available from such third party sites or resources. Furthermore, you acknowledge and agree that Apex Education, Inc. shall not be responsible or liable, directly or indirectly, for any such damage or loss which may be a result of, caused or allegedly to be caused by or in connection with the use of or the reliance on any such content, goods or Services made available on or through any such site or resource. You do hereby acknowledge and agree that Apex Education, Inc.'s Services and any essential software that may be used in connection with our Services ("Software") shall contain proprietary and confidential material that is protected by applicable intellectual property rights and other laws. Furthermore, you herein acknowledge and agree that any Content which may be contained in any advertisements or information presented by and through our Services or by advertisers is protected by copyrights, trademarks, patents or other proprietary rights and laws. Therefore, except for that which is expressly permitted by applicable law or as authorized by Apex Education, Inc. or such applicable licensor, you agree not to alter, modify, lease, rent, loan, sell, distribute, transmit, broadcast, publicly perform and/or created any plagiaristic works which are based on Apex Education, Inc. Services (e.g. Content or Software), in whole or part. Apex Education, Inc. herein has granted you personal, non-transferable and non-exclusive rights and/or license to make use of the object code or our Software on a single computer, as long as you do not, and shall not, allow any third party to duplicate, alter, modify, create or plagiarize work from, reverse engineer, reverse assemble or otherwise make an attempt to locate or discern any source code, sell, assign, sublicense, grant a security interest in and/or otherwise transfer any such right in the Software. Furthermore, you do herein agree not to alter or change the Software in any manner, nature or form, and as such, not to use any modified versions of the Software, including and without limitation, for the purpose of obtaining unauthorized access to our Services. Lastly, you also agree not to access or attempt to access our Services through any means other than through the interface which is provided by Apex Education, Inc. for use in accessing our Services. YOU HEREIN EXPRESSLY ACKNOWLEDGE AND AGREE THAT:
Publications Neither Party shall publicly present or publish results of studies carried out under this Agreement (each such presentation or publication a “Publication”) without the opportunity for prior review by the other Party, except to the extent otherwise required by Applicable Law, in which case Section 12.3 shall apply with respect to disclosures required by the SEC and/or for regulatory filings. The submitting Party shall provide the other Party the opportunity to review any proposed Publication at least thirty (30) days prior to the earlier of its presentation or intended submission for publication. The submitting Party agrees, upon request by the other Party, not to submit or present any Publication until the other Party has had thirty (30) days to comment on any material in such Publication. The submitting Party shall consider the comments of the other Party in good faith, but will retain the sole authority to submit the manuscript for Publication; provided that the submitting Party agrees to delay such Publication as necessary to enable the Parties to file a Patent if such Publication might adversely affect such Patent. The submitting Party shall provide the other Party a copy of the Publication at the time of the submission or presentation. Notwithstanding the foregoing, BMS shall not have the right to publish or present Ambrx’s Confidential Information without Ambrx’s prior written consent, and Ambrx shall not have the right to publish or present BMS’ Confidential Information without BMS’ prior written consent. Each Party agrees to acknowledge the contributions of the other Party, and the employees of the other Party, in all publications as scientifically appropriate. This Section 12.4 shall not limit and shall be subject to Section 12.5. Nothing contained in this Section 12.4 shall prohibit the inclusion of information in a patent application claiming, and in furtherance of, the manufacture, use, sale or formulation of a Compound, provided that the non-filing Party is given a reasonable opportunity to review, comment upon and/or approve the information to be included prior to submission of such patent application, where and to the extent required by Article 9 hereof. Notwithstanding the foregoing, the Parties recognize that independent investigators have been engaged, and will be engaged in the future, to conduct Clinical Trials of Compounds and Products. The Parties recognize that such investigators operate in an academic environment and may release information regarding such studies in a manner consistent with academic standards; provided that each Party will use reasonable efforts to prevent publication prior to the filing of relevant patent applications and to ensure that no Confidential Information of either Party is disclosed.
Other Methods of Procurement of Goods and Works. The following table specifies the methods of procurement, other than International Competitive Bidding, which may be used for goods and works. The Procurement Plan shall specify the circumstances under which such methods may be used:
(a) National Competitive Bidding (b) Shopping (c) Direct Contracting
