Optional Feasibility Study Scope and Procedures Sample Clauses

Optional Feasibility Study Scope and Procedures. The Optional Feasibility Study shall preliminarily evaluate the feasibility of the proposed interconnection to the New York State Transmission System. The Optional Feasibility Study shall be conducted in accordance with Applicable Reliability Standards and will evaluate the Transmission Project using the Base Case described in Section 22.6. 1. The Optional Feasibility Study may consist of any of the following technical analyses as described in the Optional Feasibility Study scope: a. Conceptual breaker-level one-line diagram of existing system where project proposes to interconnect; b. Review of feasibility/constructability of conceptual breaker-level one-line diagram of the proposed interconnection (e.g., space for additional breaker bay in existing substation; identification of cable routing concerns inside existing substation; environmental concerns inside the substation); c. Preliminary review of local protection, communication, grounding issues associated with the proposed interconnection; d. Power flow, short circuit and/or bus flow analyses; and/or e. Identification of Network Upgrade Facilities. The schedule for completing the Optional Feasibility Study will be documented in the Optional Feasibility Study Agreement. The ISO shall utilize existing studies to the extent practicable when it performs the study. Upon request, the ISO shall provide the Transmission Developer supporting documentation, workpapers and relevant power flow, short circuit and stability databases for the Optional Feasibility Study, subject to confidentiality arrangements consistent with Section 22.13.1.
AutoNDA by SimpleDocs
Optional Feasibility Study Scope and Procedures. 32.3.3.1 The optional feasibility study shall identify any potential adverse system impacts that would result from the interconnection of the Small Generating Facility. 32.3.3.2 A deposit of $10,000 or $30,000, depending upon the scope of analysis requested by the Interconnection Customer pursuant to Section 32.3.3.3 of this Attachment Z, must be submitted to the ISO within fifteen (15) Business Days of the ISO’s notice of the good faith estimate of the cost and timeframe to perform the study. 32.3.3.3 The optional feasibility study may consist of any of the following technical analyses as described in the study scope: For a $10,000 optional feasibility study deposit, Interconnection Customer may request the following limited analyses: (1) Conceptual breaker-level one-line diagram of existing system where project proposes to interconnect (i.e., how to integrate the Small Generating Facility into the existing system); and/or (2) Review of feasibility/constructability of conceptual breaker-level one-line diagram of the proposed interconnection (e.g., space for additional breaker bay in existing substation; identification of cable routing concerns inside existing substation; environmental concerns inside the substation).; For a $30,000 optional feasibility study deposit, Interconnection Customer may request the following detailed analyses: (1) Development of conceptual breaker-level one-line diagram of existing NYS Transmission System or Distribution System where the Small Generating Facility proposes to interconnect (i.e., how to integrate the Small Generating Facility into the existing system); (2) Review of feasibility/constructability of a conceptual breaker-level one- line diagram of the proposed interconnection (e.g., space for additional breaker bay in existing substation or identification of cable routing concerns inside existing substation); (3) Preliminary review of local protection, communication, grounding issues associated with the proposed interconnection; (4) Power flow, short circuit and/or bus flow analyses; and/or (5) Identification of Connecting Transmission Owner Interconnection Facilities and Local System Upgrade Facilities with a non-binding good faith estimate of cost responsibility and a non-binding good faith estimated time to construct. The scope of the optional feasibility study will be provided to the Interconnection Customer and Connecting Transmission Owner for review and comment. After the study scope is finalized, the ISO will ...

Related to Optional Feasibility Study Scope and Procedures

  • Feasibility Study A feasibility study will identify the potential costs, service quality and other benefits which would result from contracting out the work in question. The cost analysis for the feasibility study shall not include the Employer’s indirect overhead costs for existing salaries or wages and benefits for administrative staff or for rent, equipment, utilities, and materials, except to the extent that such costs are attributable solely to performing the services to be contracted out. Upon completion of the feasibility study, the Employer agrees to furnish the Union with a copy if the feasibility study, the bid from the Apparent Successful Bidder and all pertinent information upon which the Employer based its decision to contract out the work including, but not limited to, the total cost savings the Employer anticipates. The Employer shall not go forward with contracting out the work in question if more than sixty percent (60%) of any projected savings resulting from the contracting out are attributable to lower employee wage and benefit costs.

  • Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Concession Area, including its abandonment.

  • Project Plan Development of Project Plan Upon the Authorized User’s request, the Contractor must develop a Project Plan. This Project Plan may include Implementation personnel, installation timeframes, escalation procedures and an acceptance plan as appropriate for the Services requested. Specific requirements of the plan will be defined in the RFQ. In response to the RFQ, the Contractor must agree to furnish all labor and supervision necessary to successfully perform Services procured from this Lot. Project Plan Document The Contractor will provide to the Authorized User, a Project Plan that may contain the following items: • Name of the Project Manager, Contact Phone Numbers and E-Mail Address; • Names of the Project Team Members, Contact Phone Numbers and E-Mail Address; • A list of Implementation milestones based on the Authorized User’s desired installation date; • A list of responsibilities of the Authorized User during system Implementation; • A list of designated Contractor Authorized Personnel; • Escalation procedures including management personnel contact numbers; • Full and complete documentation of all Implementation work; • Samples of knowledge transfer documentation; and • When applicable, a list of all materials and supplies required to complete the Implementation described in the RFQ. Materials and Supplies Required to Complete Implementation In the event that there are items required to complete an Implementation, the Contractor may request the items be added to its Contract if the items meet the scope of the Contract. Negotiation of Final Project Plan If the Authorized User chooses to require a full Project Plan, the State further reserves the right for Authorized Users to negotiate the final Project Plan with the apparent RFQ awardee. Such negotiation must not substantively change the scope of the RFQ plan, but can alter timeframes or other incidental factors of the final Project Plan. The Authorized User will provide the Contractor a minimum of five (5) business days’ notice of the final negotiation date. The Authorized User reserves the right to move to the next responsible and responsive bidder if Contractor negotiations are unsuccessful.

  • Technical Feasibility of String While ICANN has encouraged and will continue to encourage universal acceptance of all top-­‐level domain strings across the Internet, certain top-­‐level domain strings may encounter difficulty in acceptance by ISPs and webhosters and/or validation by web applications. Registry Operator shall be responsible for ensuring to its satisfaction the technical feasibility of the TLD string prior to entering into this Agreement.

  • Project Implementation The Borrower shall:

  • Project Work Plan The Statement of Work is the formal document incorporated into the Grant. The Project Work Plan documents how the Grantee will achieve the performance measures outlined in the Grant. Changes to the Statement of Work require an amendment. Project Work Plans may be changed with written approval from PEI and the Grantee.

  • HIRING PROCEDURE 5.1 At the Pre-job Conference the Employer may request and the Local Union shall clear: 5.1.1 Up to ten percent (10%) of the Principal Operators excluding mechanics, required for the job from other Locals of the Union and each such Principal Operator shall be entitled to perform only the work for which he is cleared. Up to one- half (½) of those Principal Operators cleared under this provision may commence employment at the start of the Right-of-Way operations and the balance of those Principal Operators cleared under this provision may commence employment not prior to the start of the Pipe Gang operations. 5.1.2 Up to fifty percent (50%) of the mechanics, utility welders and lubrication and service unit operators required for the job who are members of another Local of the Union. This ratio shall be maintained on a "one-to-one" basis for the duration of the job. The first employee shall be a member of the Local Union having geographic jurisdiction for the job. 5.1.3 The Employer shall have the right to name request by classification up to fifty percent (50%) of the required employees who are members of the Local Union. Those employees hired under the provisions of Article 5.1.1 and 5.1.2 above shall be included in the fifty percent (50%). This ratio shall be maintained on a one-to-one basis for the duration of the job. Thereafter the Employer shall notify the Local Union of all his employee requirements and shall only hire those who have been cleared for work by the Local Union having jurisdiction. 5.2 The Local Union shall be given forty-eight (48) hours exclusive of Saturdays, Sundays, and holidays to supply the required employees but shall advise the Employer of expected delays in dispatching any employees within forty- eight (48) hours. Employees shall be entitled to Waiting Time or Reporting Time upon arrival at the jobsite on the day designated by the Employer for arrival, if no work is provided. 5.3 All employees shall be in possession of a referral slip from the Local Union for identification purposes unless the Local Union otherwise clears an employee for hire by telegram, telex, facsimile transmission or other means of written communication. All out-of-province employees must provide the Local Union having jurisdiction with a copy of a duly authorized Travel Card issued by his/her home Local prior to being issued a referral slip and cleared to work. 5.4 Subject to the terms and conditions of this Agreement, the Employer shall have the right to refuse any referral provided the cause for such refusal is stated and shall not be unreasonable. 5.5 If the Local Union is unable to supply the required employees in accordance with Article 5.2, the Employer may obtain employees elsewhere, subject to the provisions of Article 3.3. 5.6 In the event the Local Union is unable to supply the required qualified employees, the Employer will provide every opportunity to any employee who has successfully completed a pipeline Operating Engineers training course, and is approved by a joint training committee, and the employee will be admitted to membership in the Local Union in accordance with Article

  • Project Implementation Manual The Recipient, through the PCU, shall: (i) take all action required to carry out Parts 1.1, 1.3, 1.4, 2, 3.1(b), 3.2, 3.3 and 4 (ii) of the Project in accordance with the provisions and requirements set forth or referred to in the Project Implementation Manual; (ii) submit recommendations to the Association for its consideration for changes and updates of the Project Implementation Manual as they may become necessary or advisable during Project implementation in order to achieve the objective of Parts 1.1, 1.3, 1.4, 2, 3.1(b), 3.2, 3.3 and 4(ii) of the Project; and (iii) not assign, amend, abrogate or waive the Project Implementation Manual or any of its provisions without the Association’s prior agreement. Notwithstanding the foregoing, if any of the provisions of the Project Implementation Manual is inconsistent with the provisions of this Agreement, the provisions of this Agreement shall prevail and govern.

  • Research Plan The Parties recognize that the Research Plan describes the collaborative research and development activities they will undertake and that interim research goals set forth in the Research Plan are good faith guidelines. Should events occur that require modification of these goals, then by mutual agreement the Parties can modify them through an amendment, according to Paragraph 13.6.

  • Study Population ‌ Infants who underwent creation of an enterostomy receiving postoperative care and awaiting enterostomy closure: to be assessed for eligibility: n = 201 to be assigned to the study: n = 106 to be analysed: n = 106 Duration of intervention per patient of the intervention group: 6 weeks between enterostomy creation and enterostomy closure Follow-up per patient: 3 months, 6 months and 12 months post enterostomy closure, following enterostomy closure (12-month follow-up only applicable for patients that are recruited early enough to complete this follow-up within the 48 month of overall study duration).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!