PERMITS TO WORK AND ISOLATION & LOCKOUT PROCEDURES Sample Clauses

PERMITS TO WORK AND ISOLATION & LOCKOUT PROCEDURES. 34.1 Isolation & Lockout  Isolation, lockout and permit to work procedures apply to all work situations identified as hazardous to ensure that it is impossible to inadvertently start any system, plant or equipment so isolated. This include mobile equipment and light vehicles.  Risks must be assessed when isolation & lockouts take place to ensure that effective controls and safe work procedures are in place.  Isolation must always be carried out on the main supply and not on the control circuit of equipment.  This must be done by an approved competent person, and everybody working on the system shall have a personal lock, with all required identification markings, affixed.  Isolation officers shall be appointed as per ICVL requirements. These appointments and records of training will be available in the Contractors Pack.  On completion of an isolation/lockout, both mechanical and electrical tests are required to ensure that the isolation is effective.  If work needs to be performed on live equipment, that would normally be isolated and locked‐out, it must be done in accordance with the ICVL requirements.  All employees required to isolate & lockout or who need to work on isolated & locked‐out systems is only allowed to do so after receiving appropriate training.
AutoNDA by SimpleDocs

Related to PERMITS TO WORK AND ISOLATION & LOCKOUT PROCEDURES

  • Safety Procedures The Contractor shall: (a) comply with all applicable safety regulations according to Attachment H; (b) take care for the safety of all persons entitled to be on the Site; (c) use reasonable efforts to keep the Site and Works clear of unnecessary obstruction so as to avoid danger to these persons; (d) provide fencing, lighting, guarding and watching of the Works until completion and taking over under clause 10 [Employer's Taking Over]; and (e) provide any Temporary Works (including roadways, footways, guards and fences) which may be necessary, because of the execution of the Works, for the use and protection of the public and of owners and occupiers of adjacent land.

  • Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.

  • Project Delivery Order Procedures The TIPS Member having approved and signed an interlocal agreement, or other TIPS Membership document, may make a request of the awarded vendor under this Agreement when the TIPS Member has services that need to be undertaken. Notification may occur via phone, the web, email, fax, or in person. Upon notification of a pending request, the awarded vendor shall make contact with the TIPS Member as soon as possible, but must make contact with the TIPS Member within two working days. Scheduling of projects (if applicable) may be accomplished when the TIPS Member issues a Purchase Order and/or an Agreement or Contract that will serve as “the notice to proceed” as agreed by the Vendor and the TIPS Member. The period for the delivery order will include the mobilization, materials purchase, installation and delivery, design, weather, and site cleanup and inspection. No additional claims may be made for delays as a result of these items. When the tasks have been completed the awarded vendor shall notify the client and have the TIPS Member or a designated representative of the TIPS Member inspect the work for acceptance under the scope and terms in the Purchase Order and/or Agreement or Contract. The TIPS Member will issue in writing any corrective actions that are required. Upon completion of these items, the TIPS Member will issue a completion notice and final payment will be issued per the contractual requirements of the project with the TIPS Member. Any Construction contract prepared by the TIPS Member’s Legal Counsel may alter the terms of this subsection, “Scheduling of Projects”.

  • Induction Procedures a) The parties to this Agreement acknowledge that it is in the interests of the industry that all new employees and employers on a building project understand their obligations to this Agreement and are introduced to their jobs in a manner which will help them work safely and efficiently. b) In order to achieve this it is recommended that, in conjunction with the Site Management, Job Xxxxxxx and Safety Supervisor/Safety Committee, new employees and new employers be given an explanation of the following: ⮚ The Rights and Obligations of this Agreement including its disputes/grievance resolution procedures; ⮚ The appropriate issue of work clothing and safety equipment as per this Agreement; ⮚ Safety Rules and Procedures including relevant legislation; ⮚ Superannuation entitlements; ⮚ Long Service Leave provisions; ⮚ Redundancy Pay entitlements; ⮚ Site Emergency procedures; ⮚ Award or Enterprise Agreement rates of pay; ⮚ Site-specific matters such as security, etc. procedures; ⮚ Rights, obligations and benefits of union membership. c) The induction presentation and material shall have regard to the language skills of the employee/employer.

  • Quality Control Procedures The Seller shall have an internal quality control program that verifies, on a regular basis, the existence and accuracy of the legal documents, credit documents, property appraisals, and underwriting decisions. The program shall include evaluating and monitoring the overall quality of the Seller's loan production and the servicing activities of the Seller. The program is to ensure that the Mortgage Loans are originated and serviced in accordance with Accepted Servicing Standards and the Underwriting Guidelines; guard against dishonest, fraudulent, or negligent acts; and guard against errors and omissions by officers, employees, or other authorized persons.

  • Grievance Procedures The AGENCY agrees to establish a formal written grievance process with procedures through which clients and recipients of services may present grievances to the governing authority of the AGENCY regarding services being provided under this Contract. Additionally, the AGENCY agrees to establish fair hearing procedures that ensure all persons will be advised of their rights to a fair hearing to appeal a denial or exclusion from services and/or the failure of staff to take into account the individual’s choice of service. The AGENCY’S internal grievance procedure must document and include, at a minimum, the following: date of grievance, a written response to the applicant sent within thirty (30) days, and the opportunity for the applicant to meet with the AGENCY Executive Director or designee. Upon request by the COUNTY, the AGENCY shall provide a written report as to the grievance outcome within five (5) normal COUNTY working days. The AGENCY will maintain these documents on file for review by the COUNTY.

  • DISCIPLINE PROCEDURES The Employer agrees to provide the employee with written notification of a disciplinary document that is to be made a part of the employee’s personnel file. In instances where the Employer desires to conduct an investigatory interview with an employee, the employee shall be entitled upon request to have an Association representative present at the interview. A copy of all disciplinary actions involving suspension or discharge will also be provided to the Association, unless the employee requests that the matter be kept confidential.

  • Testing Procedures Testing will be conducted by an outside certified Agency in such a way to ensure maximum accuracy and reliability by using the techniques, chain of custody procedures, equipment and laboratory facilities which have been approved by the U.S. Department of Health and Human Services. All employees notified of a positive controlled substance or alcohol test result may request an independent test of their split sample at the employee’s expense. If the test result is negative the Employer will reimburse the employee for the cost of the split sample test.

  • WARRANTY PROCEDURES You need proof of purchase for warranty service.

  • Food Service Waste Reduction Requirements Contractor shall comply with the Food Service Waste Reduction Ordinance, as set forth in San Francisco Environment Code Chapter 16, including but not limited to the remedies for noncompliance provided therein.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!