Price and Cost Proposal Sample Clauses

Price and Cost Proposal. A Purchase Order issued against the Master Agreement;
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
Price and Cost Proposal. Cost proposal must be submitted to the Lead State as a separate document in Offerors Proposal. Do not embed cost proposal in the technical proposal response. Offeror shall provide detailed costs for all costs associated with the responsibilities and related services, per Attachment 4. Cost for the NASPO ValuePoint Master Agreements shall be based on the following: Offeror must submit cost, prices and rates as required by (Pricing and Pricing Scenario Workbooks attached in APP within the Attachments Tab), Cost Sheets. Prices and rates shall include all anticipated charges, including but not limited to, freight and delivery, cost of materials and product, travel expenses, transaction fees, overhead, profits, and other costs or expenses incidental to the Offeror’s performance. The Lead State is exempt from federal excise taxes and no payment will be made for any taxes levied on the Offeror’s or any Subcontractor’s employee’s wages. The Lead State will pay for any applicable Lead State or local sales or use taxes on the products provided or the services rendered. If required by Lead State, Taxes shall be included as a separate line item on an Offeror’s invoice. The tax rules with respect to other Participating Entities may vary and are expected to be addressed in the Participating Amendments.
Sample 1Sample 2Sample 3See All (4)
Price and Cost Proposal. Cost proposals will be evaluated independent of the technical evaluation. Cost proposal must be submitted to the Lead State as a separate document in Suppliers Proposal. Do not embed cost proposal in the technical proposal response. Supplier shall provide detailed pricing for all costs associated with the responsibilities and related services, per Attachment D. Supplier may provide pricing for one category or all categories, with exception to category which contains data storage and software. These services are reserved to suppliers which also provide equipment mentioned. Supplier must submit cost, prices and rates as required by Attachment D Pricing Template. Pricing shall include all anticipated charges, including but not limited to, freight and delivery, cost of materials and product, travel expenses, transaction fees, overhead, profits, and other costs or expenses incidental to the Supplier’s performance. The Lead State is exempt from federal excise taxes and no payment will be made for any taxes levied on the Supplier’s or any Subcontractor’s employee’s wages. The tax rules with respect to other Participating Entities may vary and are expected to be addressed in the Participating Addenda. Generally, Government Agencies do not pay sales tax.
Sample 1Sample 2
Price and Cost Proposal. Pricing must be submitted on the attached price schedule. Cost in proposals will be evaluated independent of the technical evaluation. Cost proposal must be submitted to the Lead State as a separate document in Offerors Proposal. Do not embed cost proposal in the technical proposal response.
Sample 1
Price and Cost Proposal. ‌ a. Offeror must submit cost, prices and rates as required by Attachment C, Cost Sheets. Prices and Percentage rates shall include all anticipated charges, including but not limited to, freight and delivery, cost of materials and product, travel expenses, transaction fees, overhead, profits, and other costs or expenses incidental to the Offeror’s performance. b. The Lead State is exempt from federal excise taxes and no payment will be made for any taxes levied on the Offeror’s or any subcontractor’s employee’s wages. The Lead State will pay for any applicable Lead State or local sales or use taxes on the products provided or the services rendered. If required by Lead State, taxes shall be included as a separate line item on a Offeror’s invoice. The tax rules with respect to other Participating Entities may vary and are expected to be addressed in the Participating Addenda.
Sample 1
Price and Cost Proposal. The Cost Proposals will be evaluated independent of the technical evaluation. Cost proposals must be submitted to the Lead State as a separate document in the Offerors’ Proposals. Do not embed cost proposal in the technical proposal response. The Lead State is exempt from federal excise taxes and no payment will be made for any taxes levied on the Offeror’s or any subcontractor’s employee’s wages. The Lead State will pay for any applicable Lead State or local sales or use taxes on the products provided or the services rendered. If required by Lead State, taxes shall be included as a separate line item on an Offeror’s invoice. The tax rules with respect to other Participating Entities may vary and are expected to be addressed in the Participating Addenda.
Sample 1
AutoNDA by SimpleDocs
Price and Cost Proposal. The Cost Proposals will be evaluated independent of the technical evaluation. Cost proposals must be submitted to the Lead State as a separate document in the Offerors’ Proposals. Do not embed cost proposal in the technical proposal response. Offeror shall provide detailed costs for all costs associated with the responsibilities and related services, per Attachment C ~ Cost. Cost for the NASPO ValuePoint Master Agreements shall be based on the following: The Lead State is exempt from federal excise taxes and no payment will be made for any taxes levied on the Offeror’s or any subcontractor’s employee’s wages. The Lead State will pay for any applicable Lead State or local sales or use taxes on the products provided or the services rendered. If required by Lead State, taxes shall be included as a separate line item on a Offeror’s invoice. The tax rules with respect to other Participating Entities may vary and are expected to be addressed in the Participating Addenda.
Sample 1
Price and Cost Proposal 
Sample 1Sample 2

Related to Price and Cost Proposal

  • Cost Proposal After the Approved Working Drawings are approved by Landlord and Tenant, Landlord shall provide Tenant with a cost proposal in accordance with the Approved Working Drawings, which cost proposal shall include, as nearly as possible, the cost of all TI Allowance Items to be incurred by Tenant in connection with the construction of the Tenant Improvements (the "Cost Proposal"). Landlord does not guaranty the accuracy of the Cost Proposal. Notwithstanding the foregoing, portions of the cost of the Tenant Improvements may be delivered to Tenant as such portions of the Tenant Improvements are priced by Contractor (on an individual item-by-item or trade-by-trade basis), even before the Approved Working Drawings are completed (the "Partial Cost Proposal"). Tenant shall either (i) approve and deliver the Cost Proposal to Landlord within five (5) business days of the receipt of the same (or, as to a Partial Cost Proposal, within two (2) business days of receipt of the same), or (ii) notify Landlord within five (5) business days after Tenant's receipt of the Cost Proposal (or Partial Cost Proposal, as the case may be) that Tenant desires to revise the Approved Working Drawings to reduce the amount of the Cost Proposal (or Partial Cost Proposal, as the case may be), in which case such changes shall be made to the Approved Working Drawings only in accordance with Section 2.7 above and the revised Working Drawings shall be provided to the Contractor for repricing whereupon Landlord shall revise the Cost Proposal (or Partial Cost Proposal, as the case may be) for Tenant's approval. This procedure shall be repeated until the Cost Proposal (or Partial Cost Proposal, as the case may be) is approved by Tenant. The date by which Tenant has approved the Cost Proposal, or the last Partial Cost Proposal, as the case may be, shall be known hereafter as the "Cost Proposal Delivery Date." The total of all Partial Cost Proposals, if any, shall be known as the Cost Proposal.

  • Technical Proposal The technical proposal may be presented in free format. It shall not exceed ten pages, not counting the CVs. It shall respect the following page limit and structure: • Technical methodology (max. 7 pages) • Quality management (max. 1 page) • Project management (max. 1 page) • Resource management (proposal (max. 1 page) + CVs of experts)

  • Proposal Proposal means any information supplied by or on behalf of the insured, deemed to be a completed proposal form and medical questionnaire and other relevant information that the insurer may require.

  • Solicitation Exceptions/Deviations Explanation If the bidder intends to deviate from the General Conditions Standard Terms and Conditions or Item Specifications listed in this proposal invitation, all such deviations must be listed on this attribute, with complete and detailed conditions and information included or attached. TIPS will consider any deviations in its proposal award decisions, and TIPS reserves the right to accept or reject any bid based upon any deviations indicated below or in any attachments or inclusions. In the absence of any deviation entry on this attribute, the proposer assures TIPS of their full compliance with the Standard Terms and Conditions, Item Specifications, and all other information contained in this Solicitation.

  • GUARANTEED MAXIMUM PRICE PROPOSAL 7.1 At the conclusion of the Design Development phase the Contractor shall prepare and submit a Guaranteed Maximum Price Proposal to Owner based on the Design Development phase documents and review comments. The GMP shall be delivered to the Owner within three (3) weeks of the Design Development review meeting or a date established by the Owner. The GMP Proposal must be prepared in accordance with the guidelines established by Owner and delivered in the format specified by Owner in Exhibit “E” attached to this Agreement. Owner, at its sole option and discretion, may specify different requirements for the GMP Proposal. Contractor shall not withdraw its Guaranteed Maximum Price Proposal for ninety (90) days following submission to Owner. 7.2 In developing the GMP Proposal, Contractor shall coordinate efforts with A/E to identify qualifications, clarifications, assumptions, exclusions, value engineering and any other factors relevant to establishment of a GMP. Contractor shall review development of the GMP Proposal with Owner on an ongoing basis to address clarifications of scope and pricing, distribution of contingencies, schedule, assumptions, exclusions, and other matters relevant to the establishment of a GMP. 7.3 The GMP Proposal must include a written description of how it was derived that specifically identifies the clarifications and assumptions made by Contractor in the GMP and the monetary amounts attributable to them. The GMP Proposal shall include, without limitation, a breakdown of Contractor’s estimated General Conditions Costs and estimated Cost of the Work organized by trade and Masterformat 2004; contingency amounts; the Construction Phase Fee; and the proposed Contract Time, including dates for Notice to Proceed, Substantial Completion and Final Completion. Notwithstanding the breakdown of Contractor’s estimated costs, there are no line item guaranteed maximum amounts except for general conditions. 7.4 The Guaranteed Maximum Price Proposal shall allow for reasonably expected changes and refinements in the Drawings and Specifications through completion of the Construction Documents, except for material changes in scope. 7.5 The GMP Proposal shall include a Contractor’s Contingency amount. 7.6 Included with its GMP Proposal, Contractor shall provide three complete, bound sets of the drawings, specifications, plans, sketches, instructions, requirements, materials, equipment specifications and other information or documents that fully describe the Project as developed at the time of the GMP Proposal and that are relevant to the establishment of the GMP. The bound supporting documents shall be referenced in and incorporated into the GMP Proposal. 7.7 The GMP Proposal and all supporting documents shall identify and describe all items, assumptions, costs, contingencies, schedules and other matters necessary and relevant for proper execution and completion of the Work and for establishment of the GMP. The GMP Proposal and the supporting documents are complementary and, in the event of an irreconcilable conflict between or among them, the interpretation that provides for the higher quality or quantity of material and/or workmanship shall prevail over all other interpretations. 7.8 In submitting the GMP Proposal, Contractor represents that it will provide every item, system or element of performance that is identified, shown or specified in the GMP Proposal or the supporting documents, along with those necessary or ancillary materials that are reasonably inferable and equipment for their complete operating installation, unless specifically accepted in writing by Owner. Upon Owner’s written acceptance of the GMP Proposal, Contractor shall not be entitled to any increase in the GMP due to the continued refinement of the Construction Documents or the absence or addition of any detail or specification that may be required in order to complete the construction of the Project as described in and reasonably inferable from the GMP Proposal or the supporting documents used to establish the GMP. 7.9 The GMP Proposal shall adopt and incorporate all of the terms and conditions of this Agreement and all attachments to this Agreement. Any proposed deviation from the terms and conditions of this Agreement must be clearly and conspicuously identified to Owner in writing and specifically accepted in writing by Owner. In the event of a conflict between any term of the GMP Proposal that was not clearly and conspicuously identified and approved by Owner and the terms of this Agreement and its attachments, the terms of the Agreement and its attachments shall control. 7.10 Owner may accept or reject the Guaranteed Maximum Price Proposal or attempt to negotiate its terms with Contractor. Upon acceptance by Owner of the GMP Proposal in writing, both parties shall execute the GMP Proposal which shall become part of this Agreement. If Owner rejects the GMP Proposal or the parties are unable or unwilling to agree on a GMP, Owner may terminate this Agreement. 7.11 Following Owner’s acceptance of the GMP Proposal, Contractor shall continue to monitor the development of the Construction Documents so that, when complete, the Construction Documents adequately incorporate and resolve all qualifications, assumptions, clarifications, exclusions and value engineering issues identified in the GMP Proposal. During the Construction Documents stage, Contractor and A/E shall jointly deliver a monthly written status report to Owner describing the progress on the incorporation of all qualifications, assumptions, clarifications, exclusions, value engineering issues and all other matters relevant to the establishment of the GMP into the Construction Documents. 7.12 Contractor shall be entitled to an equitable adjustment of the GMP if it is required to pay or bear the burden of any new federal, state, or local tax, or any rate increase of an existing tax, except taxes on income, adopted through statute, court decision, written ruling, or regulation taking effect after acceptance of the GMP Proposal. This equitable adjustment does not apply to tax increases borne solely by Subcontractors. 7.13 The parties may agree to convert the GMP to a lump sum contract amount at any time after Contractor has received bids or proposals from trade Contractors or Subcontractors for the performance of all major elements of the Project. In proposing a lump sum amount, Contractor shall consider the buyout savings, any unused contingency amounts and the trade package contracts that have not been finalized. In preparing a lump sum conversion proposal, Contractor must provide the following information: 7.13.1 The stage of completion of the Project; 7.13.2 The trade packages that have been completely bought out; 7.13.3 The trade packages remaining that have not been bought out; 7.13.4 A complete line item breakdown of the calculations used to establish a lump sum amount based on the GMP Schedule of Values; 7.13.5 An accounting of all savings amounts that are to be returned to Owner as part of the lump sum calculation; and 7.13.6 Any other Project information requested by Owner. 7.14 Contractor shall document the actual Cost of the Project at buyout as compared to the Guaranteed Maximum Price Proposal and shall report this information to Owner monthly and with Contractor’s recommendation for selection of a bid/proposal for each subcontracting package. 7.15 Notwithstanding anything to the contrary herein, Contractor shall have no liability for delay or liquidated damages if the parties are unable to reach an agreement on the GMP.

  • Negotiation; Alternative Dispute Resolution The Parties will attempt in good faith to resolve any dispute or controversy arising out of or relating to the performance of services under this Agreement. If the Parties are unable to resolve the dispute, then, pursuant to San Francisco Administrative Code Section 21.36, Contractor may submit to the Contracting Officer a written request for administrative review and documentation of the Contractor's claim(s). Upon such request, the Contracting Officer shall promptly issue an administrative decision in writing, stating the reasons for the action taken and informing the Contractor of its right to judicial review. If agreed by both Parties in writing, disputes may be resolved by a mutually agreed-upon alternative dispute resolution process. If the parties do not mutually agree to an alternative dispute resolution process or such efforts do not resolve the dispute, then either Party may pursue any remedy available under California law. The status of any dispute or controversy notwithstanding, Contractor shall proceed diligently with the performance of its obligations under this Agreement in accordance with the Agreement and the written directions of the City. Neither Party will be entitled to legal fees or costs for matters resolved under this section.

  • Agreement Exceptions/Deviations Explanation If the proposing Vendor desires to deviate form the Vendor Agreement language, all such deviations must be listed on this attribute, with complete and detailed conditions and information included. TIPS will consider any deviations in its proposal award decisions, and TIPS reserves the right to accept or reject any proposal based upon any deviations indicated below. In the absence of any deviation entry on this attribute, the proposer assures TIPS of their full compliance with the Vendor Agreement.

  • Acquisition Proposal “Acquisition Proposal” shall mean any offer or proposal (other than an offer or proposal made or submitted by Parent) contemplating or otherwise relating to any Acquisition Transaction.

  • Additional proposals If the Company at any time during the continuance of this Agreement desires to modify expand or otherwise vary its activities carried on pursuant to this Agreement beyond those specified in any approved proposal, it shall give notice of such desire to the Minister and within 2 months after giving such notice shall submit to the Minister detailed proposals in respect of such modifications expansions or variations and such other matters as the Minister may require. The provisions of clause 4 and 5 (including (for the avoidance of doubt) clause 5(9)) shall apply, the necessary changes being made, to proposals submitted pursuant to this clause.

  • Arbitration Decision The arbitrator’s decision will be final and binding. The arbitrator shall issue a written arbitration decision revealing the essential findings and conclusions upon which the decision and/or award is based. A party’s right to appeal the decision is limited to grounds provided under applicable federal or state law.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!