Procedure Description Sample Clauses

Procedure Description. 5.1 SPECIFICATIONS [*] 5.1.1 GLOSSARY Ps = pico-seconds Km = kilometer nm = nanometer nm2 = nanometers square dB = decibels [Greek letter MU] m = micrometer m = meter lbf = pounds (force) kpsi = 1000 pounds per square inch mm = millimeters cm = centimeters in = inches [degree symbol] c = degrees centigrade This document is controlled only when printed on designated controlled watermark paper. * CONFIDENTIAL PORTIONS OMITTED AND FILED SEPARATELY WITH THE COMMISSION PURSUANT TO AN APPLICATION FOR CONFIDENTIAL TREATMENT PURSUANT TO RULE 24b-2 UNDER THE SECURITIES EXCHANGE ACT OF 1934, AS AMENDED. ------------------------------------------------------------------------------ Document No: 1QP 008-0011 Revision Date: [*] Claremont Operations Fiber Optic Cable ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ 5.2 TABLE 1, PHYSICAL CHARACTERISTICS ----------------------------------- -------------------------------- PHYSICAL CHARACTERISTICS SINGLEMODE FIBER ----------------------------------- -------------------------------- [*] [*] ----------------------------------- -------------------------------- 5.3 TABLE 2, OPTICAL CHARACTERISTICS (UNLESS OTHERWISE SPECIFIED AND AGREED UPON BY COMMSCOPE) Note: For colored fiber, optical characteristics shall be measured and reported on the uncolored fiber, prior to being colored. This document is controlled only when printed on designated controlled watermark paper. * CONFIDENTIAL PORTIONS OMITTED AND FILED SEPARATELY WITH THE COMMISSION PURSUANT TO AN APPLICATION FOR CONFIDENTIAL TREATMENT PURSUANT TO RULE 24b-2 UNDER THE SECURITIES EXCHANGE ACT OF 1934, AS AMENDED. ------------------------------------------------------------------------------ Document No: 1QP 008-0011 Revision Date: [*] Claremont Operations Fiber Optic Cable ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ ----------------------------------- -------------------------------- [*] [*] ----------------------------------- -------------------------------- 5.4 TABLE 3, MECHANICAL REQUIREMENTS ----------------------------------- -------------------------------- ITEM DESCRIPTION SPECIFICATION ----------------------------------- -------------------------------- [*] [*] ----------------------------------- -------------------------------- 5.5 TABLE 4, SHIP...
Sample 1See All (5)
AutoNDA by SimpleDocs
Procedure Description. Compared the non-GAAP financial information to the reconciliation of that non-GAAP financial measures to the corresponding GAAP measure included in, or incorporated by reference in, the Registration Statement and the Preliminary Prospectus and against amounts in the Company’s internal books and records and found them to be in agreement, in some cases after rounding or truncation as appropriate.
Sample 1Sample 2Sample 3
Procedure Description. Compared the dollar amount, percentage, or numerical amount shown to the corresponding amounts shown in the Company’s audited consolidated financial statements including notes thereto, incorporated by reference in the Registration Statement, as of or for the period indicated, and found them to be in agreement, either before or after rounding.
Sample 1
Procedure Description. Selection Phase
Sample 1
Procedure Description. 2.1 Primuslabs, makes available to its registrants their e-mails, web pages, faxes or telephones to guarantee communication between the parties. 2.2 Primuslabs, makes available this form in physical and electronic form, the Evaluation Request Form and the Cost Chart. 2.3 The registrant will send the evaluation request form to the Certification Body, based on this form, the certification body will send the offer with the corresponding costs. 2.4 In the event that the registrant requires the services, the company shall send the communication to the Certification Body to initiate the evaluation process. 2.5 After complying with point 1.3 and before starting the evaluation process, the registrant must send the commercial label, bank transfer data, additional information requested by the certification body, the physical sample and, if necessary, the certification body shall request product analysis. The original page of the Evaluation Request Form and this document must be sent signed to the exact physical address provided by the Certification Body. 2.6 Once the evaluation process is completed, copies of the Confirmation of equivalence will be issued for reviewing, the Certification Body will only issue the original documents when it has received the confirmation of the copies sent, the registrant must send the document via mail. The original documents of the Confirmation of Equivalence will be sent via Courier. 2.7 In the event that the registrant is interested in including products that are identical in composition and process of elaboration to one that already has Confirmation of Equivalence and that only differ in the registered trademark it will be possible to include this one or the new commercial marks that are requested By the registrant, in this case the evaluation request form with the complete information and the commercial label must be sent for reviewing and acceptance by the certification body, in case it is necessary to request a commercial sample and / or additional information . 2.8 For annual renewal, the registrant must submit to the Certification Body a renewal confirmation stating that the product has not been modified in composition or processing. The letter will be provided by the Certification Body. The cost for the annual renewal will be less than the initial cost, which is specified in the Cost Table. 2.9 If the evaluation process has been initiated and the registrant does not send the requested information, the certification body can ...
Sample 1
Procedure Description 
Sample 1

Related to Procedure Description

  • System Description The wet detention basin is designed to trap 80% of sediment in runoff and maintain pre-development downstream peak flows. The basin has two forebays (smaller ponds) located at the low end of two grass xxxxxx. In addition to runoff conveyance, the grass xxxxxx also allow infiltration and filtering of pollutants, especially from smaller storms. The forebays are each 4 feet deep. They are connected to the main pool by 18 and 24-inch metal pipes that outlet onto a rock chute. The forebays will trap coarse sediments in runoff, such as road sands, thus reducing maintenance of the main basin. The main pool will trap the finer suspended sediment. To do this, the pond size, water level and outlet structures must be maintained as specified in this Agreement (see Figures 1, 2 and 3). The main basin receives runoff from a 67.1 acre drainage area (41.2 acres within the subdivision and 25.9 acres off-site drainage coming from the east). During high rainfall or snow melt events, the water level will temporarily rise and slowly drain down to the elevation of the control structure. The water level is controlled by a 12-inch concrete pipe extending through the berm in the northwest corner of the basin (see Figures 1 and 3). On the face of the 12-inch pipe, there is metal plate with a 3-inch drilled hole (orifice) with stone in front of it. This orifice controls the water level and causes the pond to temporarily rise during runoff events. Washed stone (1- 2” diameter) is placed in front of the orifice to prevent clogging. High flows may enter the grated concrete riser or flow over the rock lined emergency spillway. “As-built” construction drawings of the basin, showing actual dimensions, elevations, outlet structures, etc. will be recorded as an addendum(s) to this agreement within 60 days after [Municipality Name] accepts verification of construction from the project engineer.

  • Work Description T-804 Opening Roads - Removal of closure devices, cleaning ditches, removing berms, and blading the traveled-way T-811 Closing Roads - Water bar frequency per BMPs for remainder of road T-811 Closing Roads - Engineering Rep. or Construction Inspector must be notified prior to performing closeout 76A Single Lane / Level 1 76 0.00 Ending 0.70

  • ITEM DESCRIPTION Equipment (include VIN, make, model, year, serial no., accessories, or other identifying features): 12. NO. OF OPERATORS PER SHIFT 13. HRLY/ DAILY/ MILEAGE SHIFT BASIS 14. SPECIAL 15. GUARANTEE (8 HOURS) Portable Toilet Rental – Serviced(Includes first day delivery/last day pickup and daily rental rate per unit) 1 $75 Daily Ea. Portable Toilet Rental – Unserviced(Rental only, no daily service call) 1 $45 Daily Ea. Accessible Portable Toilet Rental – Serviced(Includes first day delivery/last day pickup and daily rental rate per unit) 1 $95 Daily Ea. Accessible Portable Toilet Rental – Unserviced(Rental only, no daily service call) 1 $65 Daily Ea.

  • Project Description In two or three brief sentences, provide a concise description of your exhibition. Include the subject matter, type of objects to be included (paintings, sculpture, manuscripts, etc.), those responsible for organizing the exhibition, and catalogue author(s).

  • Topic Description Remedies Xxxxxx Mae may seek immediate equitable relief to enjoin any unauthorized use or disclosure of Confidential Information, in addition to all other rights and remedies it may have at law or otherwise. Exclusions The obligations in this section do not apply to information that is or becomes public through no fault of Licensee, was previously known or is disclosed to Licensee free of any obligation to keep it confidential or is independently developed by Licensee without reference or access to the Confidential Information. Disclosure required by applicable law The restrictions on disclosure to a third party do not apply to the extent Licensee is required to disclose the Confidential Information by applicable law, provided that Licensee:  uses all reasonable efforts to give Xxxxxx Xxx notice at least ten business days prior to such disclosure, and  discloses only that portion of the Confidential Information that Licensee’s legal counsel determines is legally required to be furnished, and requests that the information remain confidential. This notice requirement is waived if Licensee is required by law to disclose in confidence confidential information in response to a request from a governmental agency, regulator or self‐regulatory authority that has authority to regulate or oversee Xxxxxx Mae’s business (including bank examiners, securities examiners, and regulators’ inspector general offices), so long as Licensee formally requests that the Confidential Information be treated in confidence and exempt from FOIA and other open records laws requests. Xxxxxx Xxx may remove from Xxxxxx Mae’s systems any material transmitted by Licensee that Xxxxxx Xxx determines is in violation of law or the Agreement or that Xxxxxx Mae determines may lead to a Performance Incident or Data Breach. Xxxxxx Xxx has no obligation to remove, screen, police, edit or monitor any data or other material generated by Licensee or its Related Parties. Licensee may provide feedback in connection with a new process, technology, technology upgrade, or service offering yet to be released into production by Xxxxxx Mae. The feedback may include comments and recommendations. When Licensee provides such feedback, it grants Xxxxxx Xxx an unlimited, worldwide, perpetual, and irrevocable license under Licensee’s intellectual property rights, without duty to account, to disclose, incorporate, practice, deploy, or adapt such feedback. Xxxxxx Mae may at times share loan quality and loan performance data and other NPI with Licensee in compliance with permitted purposes outlined in the Gramm‐Xxxxx‐Xxxxxx Act and other applicable privacy laws. Licensee must use such data only for those limited permitted purposes.

  • Service Description 2.1 General

  • Site Description {Buyer Comment: Provide a legal description of the Site, including the Site map.}

  • General Description Employer shall provide Employee with the compensation, incentives, benefits, and business expense reimbursement specified elsewhere in this agreement.

  • Long Description (If Applicable Training to provide the knowledge, skills and abilities needed as a result of agency mission, policies, or procedures. . Training to acquire the knowledge, skills and abilities needed as a result of assignment to new duties and responsibilities when such training is not part of a planned, career development program (e.g., training provided to a staffing specialist who has been newly assigned to a position involving classification duties).

  • Overtime Description For Paid Holidays: Holiday pay for all holidays shall be prorated based two hours per day for each day worked in the holiday week, not to exceed 8 hours of holiday pay. For Thanksgiving week, the prorated share shall be 5 1/3 hours of holiday pay for each day worked in Thanksgiving week. Overtime Time and one half the regular rate after an 8 hour day. Time and one half the regular rate for Saturday. Double time the regular rate for Sunday.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!