PRODUCT DESIGN AND DEVELOPMENT Sample Clauses

PRODUCT DESIGN AND DEVELOPMENT. 7.8.1 When design responsible, the supplier shall complete the initial product design and maintain a record of all changes for each product. Xxxxxx Scientific shall be notified of all changes impacting product form, fit function or potential influence on user experience. All changes shall be reviewed, verified and validated, prior to the implementation and acceptance by Xxxxxx Scientific. 7.8.2 The supplier shall verify that the product meets the requirements established during the planning activities. The supplier may be required to participate in design reviews with the Xxxxxx Scientific project team.
AutoNDA by SimpleDocs
PRODUCT DESIGN AND DEVELOPMENT. BUYER will design and develop Products in its facility in the United States.
PRODUCT DESIGN AND DEVELOPMENT. 3.1 Supplier shall design and develop the Products in accordance with the Requirements and the milestone processes specified by SOUND UNITED as set forth in Schedule II, as well as other instructions provided by SOUND UNITED from time to time (such act of designing and developing, the “Development Work”). Supplier shall obtain SOUND UNITED’s written approvals at each milestone required in Schedule II. 3.2 Upon SOUND UNITED’s request from time to time, Supplier shall produce a written report with respect to the progress of the Development Work, in the form separately designated by SOUND UNITED. 3.3 In the event Supplier becomes aware of any factor which adversely affects or may reasonably adversely affect the progress of the Development Work, Supplier shall notify SOUND UNITED immediately and propose to SOUND UNITED possible alternative course(s) of action reasonably acceptable to SOUND UNITED. Any alternative course of action agreed by the Parties to be taken shall be reduced to writing by Supplier and approved by SOUND UNITED. Compliance with this Section or acceptance by SOUND UNITED of any alternative course of action shall not prejudice SOUND UNITED’s right to claim for damages, losses, demands, costs and expenses, including but not limited to reasonable attorneys’ fees and court costs (collectively, the “Damages”) under this Agreement. 3.4 The Parties acknowledge and agree that performance of the Development Work in accordance with the Schedule is critical in the timely launch of a new Product or a model of a Product and that any delay in the Schedule may cause SOUND UNITED to incur Damages, which may include, without limitation, additional costs and expenses to speed up any processes or to take alternative courses of action relating to the Development Work to make up for the delay in the Schedule (e.g., sending of SOUND UNITED staff to Supplier’s facility to assist or give instructions to Supplier’s staff; expedited shipment of the Products (including samples); updating of software in the Products in warehouse; procurement of replacement goods and services from an alternate source; etc.). Accordingly, any delay in the Development Work caused by Supplier or a situation where departure from the Schedule is inevitable due to causes attributable to Supplier will entitle SOUND UNITED to (i) compensation by Supplier for such Damages incurred thereby; and (ii) at SOUND UNITED’s option, cancel the applicable Award and terminate this Agreement. Supplier’s com...

Related to PRODUCT DESIGN AND DEVELOPMENT

  • Research and Development (i) Advice and assistance in relation to research and development of Party B; (ii) Advice and assistance in strategic planning; and

  • Training and Development 3.1 Authorities will develop local 'Workforce Development Plans (see Part 4.8),' closely linked to their service delivery plans, which will provide the focus for the establishment of training and development priorities. Training and development should be designed to meet the corporate and service needs of authorities both current and in the future, taking into account the individual needs of employees. Local schemes on training and development should enable authorities to attain their strategic objectives through development of their employees. Training and development provisions should be shaped to local requirements and take account of the full range of learning methods. Such an approach should enable access to learning for all employees. The needs of part time employees and shift workers need particular consideration. 3.2 Employees attending or undertaking required training are entitled to payment of normal earnings; all prescribed fees and other relevant expenses arising. Employees are also entitled to paid leave for the purpose of sitting for required examinations. When attending training courses outside contracted daily hours, part-time employees should be paid on the same basis as full- time employees. (Assistance for other forms of learning, for example that directed at individual development, will be locally determined). Some training can be very expensive and authorities may require repayment of all or part of the costs incurred should an employee leave the authority before a reasonable time period has expired. The authority's policy in this regard should be made explicit. 3.3 Objectives for training and development programmes should include the following: • To enable Councils to attain their strategic objectives via investment in their employees. • To promote equity of access to learning. • To encourage employees to develop their skills and level of responsibility to the maximum of their individual potential. • To widen and modernise the skills profile of employees to maximise their versatility, employability and so, job security. • To enable employees to raise productivity, quality and customer service in pursuit of sustainable improvement 3.4 Authorities should establish local partnership arrangements, to include recognised trade unions, to develop their local workforce development plans. 3.5 The NJC endorses partnership provision such as the "Return to Learn" scheme. Authorities and the recognised trade unions shall encourage and support employees taking on the statutory Union Learning Representative (ULR) role. This will include agreeing facilities and paid release in accordance with statutory provisions. ULRs should be enabled to play a full part in promoting and implementing local training and development programmes.

  • Product Development (a) Supplier may develop enhancements it intends to incorporate into the BioGlue Surgical Adhesive during the term of this Agreement that have potential application to the Company Product (“Enhancements”). Unless otherwise agreed by the parties, at least once every six months during the Term, representatives of each of BioForm and Supplier shall hold a meeting in accordance with Sections 4.4 and 8.4 (the “Product Development Meeting”) at which Supplier will present Enhancements for BioForm to consider for application to the Company Product. At such Product Development Meeting, BioForm will also present its marketing plans (pursuant to Section 4.4) for the period and any information or feedback that BioForm reasonably believes may lead to Improvements. Within 30 calendar days following each Product Development Meeting, Supplier shall deliver a notice to BioForm (the “Enhancements Notice”) that shall describe the Enhancements that were presented by Supplier at such Product Development Meeting. Within 30 calendar days following receipt of the Enhancements Notice, BioForm may notify Supplier in writing if BioForm elects that any Enhancement described in the Enhancements Notice shall become an Improvement. If BioForm does provide such notice to Supplier during such 30-calendar day period, then BioForm and Supplier shall agree on a timeline for implementation of the Improvement in new Product Specifications for Company Product. If BioForm does not provide such a notice, said Enhancement shall not be implemented into the Company Product. The Enhancements Notice may also describe any potential Enhancements presented by Supplier at the Product Development Meeting, but BioForm shall not be required to take any action under this Section 8.4 with respect to such potential Enhancements until such time as they are presented by Supplier as Enhancements at a future Product Development Meeting. All Enhancements and potential Enhancement information provided by Supplier shall be considered Supplier Confidential Information. (b) From time to time, each party may request the other party to participate in joint projects to develop Improvements. Neither party is obligated to participate in such projects, and in each **** Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. instance, each party’s decision whether to participate will be made in such party’s sole discretion. If both parties mutually agree to participate in such a project (a “Program”), the parties will promptly prepare a mutually agreeable written development agreement specifying the development activities to be performed by and the research and development tasks assigned to each party (the “Development Agreement”). All allocation of Intellectual Property rights with respect to any Program will be set forth in writing in the Development Agreement. (c) In the absence of a Development Agreement, (i) BioForm and Supplier shall retain joint ownership of Intellectual Property rights in which there is joint inventorship by BioForm (or its Affiliates) and Supplier, as determined in accordance with United States patent law, with Supplier’s rights in such joint ownership being subject to the license rights of BioForm under this Agreement, (ii) any Intellectual Property rights related to the Company Products, Enhancements, and Improvements that are created solely by employees or consultants of Supplier during the Term shall be considered to be Intellectual Property rights of Supplier, subject to the license rights of BioForm under this Agreement, and (iii) any Intellectual Property rights related to the Company Products and Improvements that are created solely by employees or consultants of BioForm or any of its Affiliates during the Term shall be considered to be Intellectual Property rights of BioForm. BioForm hereby grants to Supplier a perpetual, royalty free, world-wide, nonexclusive license to Supplier under such Blocking Intellectual Property to make, use, and sell such Intellectual Property outside the Field. “Blocking Intellectual Property” for the purposes of Section 8.4(c)(iii) shall mean Intellectual Property necessary for Supplier to make, use, or sell SA Product.

  • Project Development a. Collaborate with COUNTY and project clients to identify requirements and develop a project Scope Statement. a. Develop a Work Breakdown Structure (WBS) for each project. b. Evaluate Scope Statement to develop a preliminary cost estimate and determinate whether project be vendor bid or be executed under a Job Order Contract (JOC).

  • Design Development An interim step in the design process. Design Development documents consist of plans, elevations, and other drawings and outline specifications. These documents will fix and illustrate the size and character of the entire project in its essentials as to kinds of materials, type of structure, grade elevations, sidewalks, utilities, roads, parking areas, mechanical and electrical systems, and such other work as may be required.

  • DEVELOPMENT OR ASSISTANCE IN DEVELOPMENT OF SPECIFICATIONS REQUIREMENTS/ STATEMENTS OF WORK

  • Curriculum Development This includes the analysis and coordination of textual materials; constant review of current literature in the field, some of which are selected for the college library collection, the preparation of selective, descriptive materials such as outlines and syllabi; conferring with other faculty and administration on curricular problems; and, the attendance and participation in inter and intra-college conferences and advisory committees.

  • Skills Development The Company acknowledges the changing pace of technology in the electrical contracting industry and the need for employees to understand those changes and have the necessary skill requirements to keep the Company at the forefront of the industry. The Parties to this Agreement recognise that in order to increase the efficiency, productivity and competitiveness of the Company, a commitment to training and skill development is required. Accordingly, the parties commit themselves to: i) Developing a more highly skilled and flexible workforce. ii) Providing employees with career opportunities through appropriate training to acquire the additional skills as required by the Company. Taking into account; The current and future skill needs of the Company. The size, structure and nature of the Company. The need to develop vocational skills relevant to the Company and the Electrical Contracting Industry. Where, by agreement between the employee and employer, an employee undertakes training providing skills, which are not a company specific requirement, any time spent in the completion of this training shall be unpaid.

  • Program Development NWESD agrees that priority in the development of new applications services by XXXXX shall be in accordance with the expressed direction of the XXXXX Board of Directors operating under their bylaws.

  • Staff Development ‌ The County and the Association agree that the County retains full authority to determine training needs, resources that can be made available, and the method of payment for training authorized by the County. Nothing in this subsection shall preclude the right of an employee to request specific training.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!