Prototype Installation Sample Clauses

Prototype Installation. 2.1 The Purchaser will submit engineering drawings. The drawings will detail: *
AutoNDA by SimpleDocs
Prototype Installation. For the first Large Load Customer in each Viable Industry Target that is serviced by an Electric Utility that receives Services, Air Products will assist Comverge on prototype installations for such Large Load Customer by assisting Comverge in applying the general principles of the Business Model to the specific circumstances of such Large Load Customer. Notwithstanding anything to the contrary herein, Comverge will provide any and all equipment needed to execute any prototype installations or Services. Further, Comverge will be solely responsible for specifying, installing and maintaining equipment required for each prototype installation and providing the Services.
Prototype Installation. The contractor shall install prototypes on vehicles, platforms, ships, submarines, facilities, at-sea buoys, and the ocean floor. The contractor shall use materials and methods that promote operational reliability and resistance to water induced corrosion for the duration of the test. The contractor shall supply professional diver support to install equipment under the water line in the case of a sea-going platform. The contractor shall verify that the equipment is installed in accordance with installation drawings, alteration documents, and alteration schematics according to design requirements specified in the TEMPALT and is operating as defined in the system technical manuals. The contractor shall provide any custom mechanical or electrical interfaces between the prototype and the host platform and location. The contractor shall integrate the custom interface devices with the prototype to complete the installation according to design requirements specified in the TEMPALT.
Prototype Installation. The Contractor shall provide for all aspects of prototype installations. Prototype installations are defined as the first installation of a new design. The purpose of this effort is to have the Contractor work with the Government activity to correct, improve or otherwise validate the installation technical information. This effort by the Contractor is to perform the installation per the delivery order and provide feedback comments, input, marked-up technical information, marked-up drawings such that future installations will result in more efficient costs to the Government. The Contractor shall notify the Government should problems be identified prior to performing the installation where the direction will result in costly mistakes.

Related to Prototype Installation

  • Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations 7.1 Lessee's Obligations.

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless otherwise designated on the Contract or purchase order. Contractor’s authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Communications Equipment Members of the board of directors or any committee thereof may participate in and act at any meeting of such board or committee through the use of a conference telephone or other communications equipment by means of which all persons participating in the meeting can hear each other, and participation in the meeting pursuant to this section shall constitute presence in person at the meeting.

  • Maintenance Repairs and Alterations Landlord hereby covenants that the Premises shall be in reasonably good and usable condition as of the effective date of this Agreement. Replacements made by Landlord, if any, shall belong to it. Landlord shall keep access to the Premises free and clear of any and all obstructions including snow and ice. ** Portions of this agreement have been omitted and filed separately with the SEC pursuant to a confidential treatment request CONFIDENTIAL EXECUTION VERSION In the event of an emergency, Tenant shall have the right to perform any obligation of Landlord under this Agreement and recover from Landlord any reasonable amounts so expended by Tenant within thirty (30) days of the date of demand or, in the alternative, to offset amounts so expended against Rent. Landlord shall, at its sole expense, make structural repairs and replacements to the footings, foundation and structural elements of walls and roofs of the Premises and also shall be responsible for maintenance, repairs and replacements, at its sole expense, of heating, ventilating, air conditioning systems, plumbing systems, and electrical systems, provided, however, that Tenant, at its sole expense, shall be responsible for maintenance, repairs and replacements regarding the irrigation system on the Premises as well as Tenant's occupancy costs as described above in Section 4 of this Agreement and shall also be responsible for maintenance, repairs or replacements necessitated by Tenant's actions. Contact information for the Landlord in case of any maintenance, repair or replacement issues is as follows: [**]1 Additions, improvements and alterations made by Tenant, whether temporary or permanent in nature, shall be subject to the prior approval of Landlord and upon completion shall belong to Tenant, provided that removal may be made without damage to the Premises at the expiration of the Agreement term. If removal of the improvements or alterations would cause damage to the Premises, said improvements and alterations shall automatically become the property of Landlord. Tenant, at its sole expense, shall be responsible for maintenance, repairs and replacements of any additions, improvements or alterations made by Tenant on, in or to the Premises. Tenant shall keep the Premises in good order, repair and condition at all times during the Agreement term, except for ordinary wear and tear.

  • Removal of Alterations If Tenant fails to remove by the expiration or earlier termination of this Lease all of its personal property, or any Alterations identified by Landlord for removal, Landlord may, at its option, treat such failure as a hold-over pursuant to Subparagraph 11(b) above, and/or Landlord may (without liability to Tenant for loss thereof) treat such personal property and/or Alterations as abandoned and, at Tenant's sole cost and expense, and in addition to Landlord's other rights and remedies under this Lease, at law or in equity: (a) remove and store such items; and/or (b) upon ten (10) days prior notice to Tenant, sell, discard or otherwise dispose of all or any such items at private or public sale for such price as Landlord may obtain or by other commercially reasonable means. Tenant shall be liable for all costs of disposition of Tenant's abandoned property and Landlord shall have no liability to Tenant with respect to any such abandoned property. Landlord agrees to apply the proceeds of any sale of any such property to any amounts due to Landlord under this Lease from Tenant (including Landlord's attorneys' fees and other costs incurred in the removal, storage and/or sale of such items), with any remainder to be paid to Tenant.

  • Alterations Tenant agrees that it will not (a) demolish or undertake any structural alterations of any of the buildings or other improvements erected upon or otherwise comprising the Demised Premises, without the prior written consent of Landlord or (b) make any other alterations which would change the character of the buildings or other improvements comprising the Demised Premises or which would weaken, impair or otherwise in any way affect the structural aspects of integrity of or lessen the value of the Demised Premises and/or the buildings and other improvements comprising the Demised Premises. With respect to any alterations permitted to be made by Tenant pursuant to this Article Ten, Tenant shall (a) pay all costs, expenses and charges thereof, (b) make the same in accordance with all applicable laws and building codes in a good and workmanlike manner, (c) cause the same to be performed by qualified contractors who shall not create any labor or other disturbance at the Demised Premises while performing same, (d) fully and completely indemnify and hold harmless Landlord from and against any mechanic’s liens or other liens or claims in connection with the making thereof and (e) by reason of such alterations, not thereby and (e) by reason of such alterations, not thereby reduce the economic value of the Demised Premises. All alterations, improvements and additions to the Demised Premises permitted to be made by Tenant hereunder, shall be made in accordance with all applicable laws and plans and specifications previously submitted to Landlord for Landlord’s approval, which approval shall not be unreasonably withheld or delayed, and, except for removable trade fixtures, shall at once when made or installed be deemed to have attached to the freehold and to have become the property of Landlord and shall remain for the benefit of Landlord at the end of the term or other expiration of this Lease in as good order and condition as they were when installed, reasonable wear and tear excepted. In the event in the making of such alteration, improvements and additions as herein provided, Tenant further agrees to indemnify and hold harmless Landlord from and against all costs, expenses, liens, claims and damages arising out of, or resulting from the undertaking or making of such alterations, improvements and additions.

  • DELIVERY AND INSTALLATION Delivery

  • Lending Installations Each Lender may book its Loans at any Lending Installation selected by such Lender and may change its Lending Installation from time to time. All terms of this Agreement shall apply to any such Lending Installation and the Loans and any Notes issued hereunder shall be deemed held by each Lender for the benefit of any such Lending Installation. Each Lender may, by written notice to the Agent and the Borrower in accordance with Article XIII, designate replacement or additional Lending Installations through which Loans will be made by it and for whose account Loan payments are to be made.

  • Rooftop Equipment Provided that Tenant complies with the terms of ----------------- this Section, Tenant may, at its risk and expense, install a satellite dish and related communications equipment and wiring (collectively, the "Rooftop ------- Equipment") on the roof of the Building at a location approved by Landlord, --------- which equipment may be used solely by Tenant and its Permitted Transferees or Permitted Sublessees. Before installing the Rooftop Equipment, Tenant shall submit to Landlord for its approval (which approval shall be in Landlord's sole discretion) plans and specifications which (a) specify in detail the design, location, size, and, in the case of a satellite dish, frequency of the Rooftop Equipment and (b) are sufficiently detailed to allow for the installation of the Rooftop Equipment in a good and workmanlike manner and in accordance with all Laws (the "Legal Requirements"). If Landlord approves of such plans, Tenant ------------------ shall install (in a good and workmanlike manner), maintain and use the Rooftop Equipment in accordance with all Legal Requirements and shall obtain all consents and permits required for the installation and operation thereof; copies of all such permits and evidence of such consents must be submitted to Landlord before Tenant begins to install the Rooftop Equipment. Tenant shall thereafter maintain all permits necessary for the maintenance and operation of the Rooftop Equipment while it is on the Building and operate and maintain the Rooftop Equipment in such a manner so as not to unreasonably interfere with any other satellite, antennae, or other transmission facility on the Building's roof or in the Building. Landlord may require that Tenant screen the Rooftop Equipment with a parapet or other screening device acceptable to Landlord. Tenant shall maintain the Rooftop Equipment and screening device in good repair and condition. Tenant shall, at its risk and expense, remove the Rooftop Equipment (including all wiring related thereto), within five days after the occurrence of any of the following events: (1) the termination of Tenant's right to possess the Premises; (2) the termination of the Lease; (3) the expiration of the Term; or (4)

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!