Pylon. 2.4.1 For the Pylon Main Structural Box
2.4.1.1 Spars
2.4.1.2 Ribs
2.4.1.3 Skin, doublers and stiffeners
2.4.1.4 Support structure and attachment fitting for engine supports
3.1 Fuselage structure
3.1.1 Fore and aft bulkheads
3.1.2 Pressurized floors and bulkheads surrounding the main and nose gear wheel well and center wing box
3.1.3 Skins with doublers, stringers and frames from the forward pressure bulkheads to the frame supporting the rear attachment of horizontal stabilizer
3.1.4 Window and windscreen attachment structure but excluding transparencies
3.1.5 Passenger and cargo doors internal structure
3.1.6 Xxxxx, excluding scuff plates, and upper beams surrounding passenger and cargo door apertures
3.1.7 Cockpit floor structure and passenger cabin floor beams excluding floor panels and seat rails
3.1.8 Keel beam structure
Pylon. If allowed by local codes, furnish, install and maintain store signage, or equal identification as approved by the Construction Manager, on roadway pylon standard. Its size may be based on PLCB's proportionate area of occupancy with respect to other tenants. Non-graphic elements (type of material, method of illumination, etc.) shall be consistent with those of other tenants' pylon signage. Graphics shall be provided by the Construction Manager as specified in 16.1.
Pylon. The Contractor shall be responsible for maintaining the lamp and control on a temporary pylon installed by others. The Contractor is not required to install pylons unless directed by the EIU.
Pylon. 2.4.1 For the Pylon Main Structural Box
Pylon. A tract of land situated in the Southeast one-quarter of Section 27, Township 1 North, Range 1 East, of the Willamette Meridian, in the City of Portland, County of Multnomah and State of Oregon, being more particularly described as follows: Commencing at a monument at the intersection of the center line of vacated X. Xxxxxx Street and the xxxxxx line of vacated X. Xxxxxxx Avenue; thence North 51° 30' 58" East along the center line of said X. Xxxxxx Street a distance of 809.35 feet; thence North 38° 29' 02" West a distance of
Pylon. [CONFIDENTIAL PORTION HAS BEEN OMITTED BECAUSE IT (I) IS NOT MATERIAL AND (II) WOULD BE COMPETITIVELY HARMFUL IF PUBLICLY DISCLOSED]
Pylon. [CONFIDENTIAL PORTION OMITTED AND FILED SEPARATELY WITH THE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]
Pylon. Provided Tenant is not then in default under the terms and conditions of the Lease Agreement, should Landlord erect a pylon sign with respect to the strip portion of Laurel Mall, Tenant, at its sole cost and expense, and subject to all applicable codes and Landlord's approval, shall have the right to install its sign face on the main pylon sign, provided there are at lease three (3) positions available on such pylon sign. In the event Tenant is allowed a pylon sign slot position, Tenant shall pay Landlord a fee to be determined by Landlord as well as Tenant's proportionate share of the installation cost, within fifteen (15) days of Tenant's receipt of an invoice therefor. Tenant shall be responsible for the maintenance, repair and removal upon expiration of earlier termination, of its pylon sign face.
Pylon. 2.4.1 For the Pylon Main Structural Box
2.4.1.1 Spars
2.4.1.2 Ribs EXECUTION VERSION – Air Lease Corporation Page 109 of 158 A350XWB Family Purchase Agreement – Ref. CLC-CT1103521
2.4.1.3 Skin, doublers and stiffeners
2.4.1.4 Support structure and attachment fitting for engine supports
3.1 Fuselage structure
3.1.1 Fore and aft bulkheads
3.1.2 Pressurized floors and bulkheads surrounding the main and nose gear wheel well and center wing box
3.1.3 Skins, doublers, stringers and frames from the forward pressure bulkheads to the frame supporting the rear attachment of horizontal stabilizer
3.1.4 Window and windscreen attachment structure but excluding transparencies
3.1.5 Passenger and cargo doors internal structure
3.1.6 Xxxxx, excluding scuff plates, and upper beams surrounding passenger and cargo door apertures
3.1.7 Cockpit floor structure and passenger cabin floor beams excluding floor panels and seat rails
3.1.8 Keel beam structure
Pylon. 2.4.1 For the Pylon Main Structural Box
2.4.1.1 Spars
2.4.1.2 Ribs
2.4.1.3 Skin, doublers and stiffeners
2.4.1.4 Support structure and attachment fitting for engine supports
