Safety and Product Control Sample Clauses

Safety and Product Control. Contractor shall provide to the Court a current Material Safety Data Sheet (MSDS) binder, which includes MSDS sheets on all products used by the Contractor in the provision of Services. In addition, the Contractor shall provide and maintain all required MSDS information in an appropriate binder at each storage closet or location in which such chemicals or products are kept and are to be used during the performance of Services. Any and all fees, which may be required by the Judicial Council of California or San Xxxxxx County relating to the storage of hazardous materials on-site, shall be paid by the Contractor. No additional compensation shall be allowed for such fees. Failure to obtain proper licensing approval could result in termination of the Agreement. The Contractor shall ensure that Contractor Personnel are sufficiently experienced, trained and capable of handling all chemicals and cleaning products according to product directions, instructions, and precautions and in such a manner so as to minimize the possibility of exposure of Courthouse occupants to any materials. Whenever possible, the Contractor shall provide chemicals, which are in the neutral range of the pH scale and fragrance free. All chemicals and products to be used shall be pre-approved by the Court’s project manager. All materials that are stored in a liquid state shall be stored on shelves not higher than three (3) feet above the floor. All products stored in secondary containers shall be properly labeled as to the contents at all times. The Contractor shall dispose of all unused products and empty containers as required by federal, state and local laws and regulations. The Contractor shall provide the Court with documentation of proper disposal of all products and containers used in the performance of Services upon request.
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
Safety and Product Control. Contractor shall provide to the Court a current Material Safety Data Sheet (MSDS) binder, which includes MSDS sheets on all products used by the Contractor in the provision of Services. In addition, the Contractor shall provide and maintain all required MSDS information in an appropriate binder at each storage closet or location in
Sample 1
Safety and Product Control. A. 7.1 Safety & Product Control CONTRACTOR shall provide to the County's Custodial Contract Coordinator a current Material Safety Data Sheet (MSDS) binder, which includes MSDS sheets on ALL products used by the CONTRACTOR in the provision of services required by the Agreement. In addition, the CONTRACTOR shall provide all required MSDS information in an appropriate binder or folder at each storage closet or location in which such chemicals or products are kept and are to be used during the performance of work required by the Agreement. A.7.2 CONTRACTOR shall be responsible for payment of any and all fees required by the Monterey County Environmental Health Department relating to the storage of hazardous materials on-site. No additional compensation shall be allowed for such fees. A.7.3 CONTRACTOR shall ensure that employees are sufficiently experienced, trained and capable of handling all chemicals and cleaning products according to product directions, instructions and precautions and in such a manner as to minimize the possibility of exposure of facility occupants to any acid-based or caustic materials. CONTRACTOR shall provide documentation regarding training provided to employees. Documentation can include sign-in sheet with training format or topics listed. Whenever possible, the CONTRACTOR shall provide chemicals in the neutral range of the pH scale. All chemicals and products to be used shall be pre-approved by the County's Custodial Contract Coordinator. All materials that are stored in a liquid state shall be stored on shelves not higher than three (3) feet above the floor. All products stored in secondary containers shall be properly labeled as to the contents. The CONTRACTOR shall dispose of all unused products and empty containers as required by Federal, State and local laws and regulations. The CONTRACTOR shall provide the County with documentation of proper disposal of all products and containers used in the performance of services under the Agreement.
Sample 1

Related to Safety and Product Control

  • SAFETY PRECAUTIONS AND PROGRAMS The Contractor shall be responsible for initiating, maintaining and supervising all safety precautions and programs in connection with the Work.

  • Safety Program The Contractor shall design a specific safety program for the Work for the site(s). The Contractor shall establish and require all Subcontractors to establish reasonable safety programs. The Contractor shall also submit its standard monthly safety reports to the Owner and Design Professional. No imposition of responsibility on the Contractor for safety under this Contract shall relieve any subcontractor of its responsibility for safety of persons or property on or near the Project Site. The Contractor shall include in his plant he names of the person in charge of Safety.

  • Safety Boots Each employee, after 3 months’ continuous service, will be reimbursed (on production of a receipt), the cost of one pair of safety boots (approved by the employer), in each year, to a maximum of $110.00. All protective clothing such as wet weather jackets, safety helmets, welding jackets, welding xxxxxxx, welding gauntlets, rubber boots, etc, (which remain the property of the Company), will be supplied on all occasions deemed necessary.

  • Training and Promotion a. The contractor will assist in locating, qualifying, and increasing the skills of minorities and women who are applicants for employment or current employees. Such efforts should be aimed at developing full journey level status employees in the type of trade or job classification involved. b. Consistent with the contractor's work force requirements and as permissible under Federal and State regulations, the contractor shall make full use of training programs, i.e., apprenticeship, and on-the-job training programs for the geographical area of contract performance. In the event a special provision for training is provided under this contract, this subparagraph will be superseded as indicated in the special provision. The contracting agency may reserve training positions for persons who receive welfare assistance in accordance with 23 U.S.C. 140(a). c. The contractor will advise employees and applicants for employment of available training programs and entrance requirements for each. d. The contractor will periodically review the training and promotion potential of employees who are minorities and women and will encourage eligible employees to apply for such training and promotion.

  • Marketing and Promotion The School will be responsible for marketing and promoting the Sports Facilities in accordance with the agreed aims and targets. A marketing strategy will be prepared and implemented and reviewed on an annual basis.

  • Safety Plan Developer’s safety plan specifically adapted for the Project. Developer's Safety Plan shall comply with all provisions regarding Project safety, including all applicable provisions in these Construction Provisions.

  • Safety Footwear 1. The State will provide employees in the positions listed in Section 3 below, and employees who are currently required to wear safety footwear by Department Work Rules, an allowance of one hundred fifty dollars ($150.00) for replacement of safety footwear. This allowance will be paid to employees on a semiannual basis, with half paid in January and half paid in July to eligible employees on the payroll at the time of the payments. Employees of Departments with work rules that provide such safety footwear will not be eligible for the safety footwear allowance. 2. Safety footwear purchased must meet ANSI standards where applicable. Requirements for the wearing of safety footwear will be in accordance with work rules published by the State. 3. Positions required to wear safety footwear:

  • Export Control This Agreement is made subject to any restrictions concerning the export of products or technical information from the United States or other countries that may be imposed on the Parties from time to time. Each Party agrees that it will not export, directly or indirectly, any technical information acquired from the other Party under this Agreement or any products using such technical information to a location or in a manner that at the time of export requires an export license or other governmental approval, without first obtaining the written consent to do so from the appropriate agency or other governmental entity in accordance with Applicable Law.

  • Safety and Protection Where applicable, the PERFORMING PARTY shall be responsible for requiring employees, contractors, and subcontractors to maintain and supervise all necessary safety precautions and programs in connection with the Grant Activities. The PERFORMING PARTY shall take all necessary precautions to protect the health and safety of the public during performance of the Grant Activities.

  • PRICE LISTS AND PRODUCT INFORMATION Contractors should provide an electronic version of the proposed price list in an Excel format or pdf on a jump drive. Also provide a dealer list, if applicable in an Excel format with "read and write" capabilities on the same jump drive. No costs or expenses associated with providing this information in the required format shall be charged to the State of Arkansas. At the time of contract renewal contractor will furnish OSP with an updated dealer list and published price list.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!