Security Program Contractor will develop and implement an effective security program for the Project Site, which program shall require the Contractor and subcontractors to take measures for the protection of their tools, materials, equipment, and structures. As between Contractor and Owner, Contractor shall be solely responsible for security against theft of and damage of all tools and equipment of every kind and nature and used in connection with the Work, regardless of by whom owned.
Security Protocols Both parties agree to maintain security protocols that meet industry standards in the transfer or transmission of any data, including ensuring that data may only be viewed or accessed by parties legally allowed to do so. Provider shall maintain all data obtained or generated pursuant to the Service Agreement in a secure digital environment and not copy, reproduce, or transmit data obtained pursuant to the Service Agreement, except as necessary to fulfill the purpose of data requests by LEA.
Information Security Program (1) DTI shall implement and maintain a comprehensive written information security program applicable to the Personal Information ("Information Security Program") which shall include commercially reasonable measures, including, as appropriate, policies and procedures and technical, physical, and administrative safeguards that are consistent with industry standards, providing for (i) the security and confidentiality of the Personal Information, (ii) protection of the Personal Information against reasonably foreseeable threats or hazards to the security or integrity of the Personal Information, (iii) protection against unauthorized access to or use of or loss or theft of the Personal Information, and (iv) appropriate disposal of the Personal Information. Without limiting the generality of the foregoing, the Information Security Program shall provide for (i) continual assessment and re-assessment of the risks to the security of Personal Information acquired or maintained by DTI and its agents, contractors and subcontractors in connection with the Services, including but not limited to (A) identification of internal and external threats that could result in unauthorized disclosure, alteration or destruction of Personal Information and systems used by DTI and its agents, contractors and subcontractors, (B) assessment of the likelihood and potential damage of such threats, taking into account the sensitivity of such Personal Information, and (C) assessment of the sufficiency of policies, procedures, information systems of DTI and its agents, contractors and subcontractors, and other arrangements in place, to control risks; and (ii) appropriate protection against such risks.
(2) The Information Security Program shall require encryption of any Personal Information in electronic format while in transit or in storage, and enhanced controls and standards for transport and disposal of physical media containing Personal Information. DTI shall, and shall require its agents, contractors and subcontractors who access or use Personal Information or Confidential Information to, regularly test key controls, systems and procedures relating to the Information Security Program ("ISP Tests"). DTI shall advise the Funds of any material issues identified in the ISP Tests potentially affecting the Information Security Program.
(3) DTI shall comply with its Information Security Program.
Program Overview Microsoft extends to eligible partners the opportunity to participate in the Program referenced above subject to these Program Terms & Conditions (“Program Terms”). Each entity participating in the Program is hereinafter referred to as a “Participant.” Participation in the Program is voluntary. The Program is governed by the Program Terms, which incorporate by reference the Microsoft Partner Network Agreement (as in effect between Microsoft and Participant, the “MPN Agreement”). Capitalized terms used but not defined in these Program Terms have the meanings assigned to them in the MPN Agreement. These Program Terms are subject to local requirements and may vary by jurisdiction, and Participant retains sole discretion to set pricing for sales of applicable products.
Safety Program The Contractor shall design a specific safety program for the Work for the site(s). The Contractor shall establish and require all Subcontractors to establish reasonable safety programs. The Contractor shall also submit its standard monthly safety reports to the Owner and Design Professional. No imposition of responsibility on the Contractor for safety under this Contract shall relieve any subcontractor of its responsibility for safety of persons or property on or near the Project Site. The Contractor shall include in his plant he names of the person in charge of Safety.
Security Procedure The Client acknowledges that the Security Procedure it has designated on the Selection Form was selected by the Client from Security Procedures offered by State Street. The Client agrees that the Security Procedures are reasonable and adequate for its wire transfer transactions and agrees to be bound by any payment orders, amendments and cancellations, whether or not authorized, issued in its name and accepted by State Street after being confirmed by any of the selected Security Procedures. The Client also agrees to be bound by any other valid and authorized payment order accepted by State Street. The Client shall restrict access to confidential information relating to the Security Procedure to authorized persons as communicated in writing to State Street. The Client must notify State Street immediately if it has reason to believe unauthorized persons may have obtained access to such information or of any change in the Client’s authorized personnel. State Street shall verify the authenticity of all instructions according to the Security Procedure.
PROPOSED MOBILITY PROGRAMME The proposed mobility programme includes the indicative start and end months of the agreed study programme that the student will carry out abroad. The Learning Agreement must include all the educational components to be carried out by the student at the receiving institution (in table A) and it must contain as well the group of educational components that will be replaced in his/her degree by the sending institution (in table B) upon successful completion of the study programme abroad. Additional rows can be added as needed to tables A and B. Additional columns can also be added, for example, to specify the study cycle-level of the educational component. The presentation of this document may also be adapted by the institutions according to their specific needs. However, in every case, the two tables A and B must be kept separated, i.e. they cannot be merged. The objective is to make clear that there needs to be no one to one correspondence between the courses followed abroad and the ones replaced at the sending institutions. The aim is rather that a group of learning outcomes achieved abroad replaces a group of learning outcomes at the sending institution, without having a one to one correspondence between particular modules or courses. A normal academic year of full-time study is normally made up of educational components totalling 60 ECTS* credits. It is recommended that for mobility periods shorter than a full academic year, the educational components selected should equate to a roughly proportionate number of credits. In case the student follows additional educational components beyond those required for his/her degree programme, these additional credits must also be listed in the study programme outlined in table A. When mobility windows are embedded in the curriculum, it will be enough to fill in table B with a single line as described below: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Mobility window … Total: 30 Otherwise, the group of components will be included in Table B as follows: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Course x … 10 Module y … 10 Laboratory work … 10 Total: 30 The sending institution must fully recognise the number of ECTS* credits contained in table A if there are no changes to the study programme abroad and the student successfully completes it. Any exception to this rule should be clearly stated in an annex of the Learning Agreement and agreed by all parties. Example of justification for non-recognition: the student has already accumulated the number of credits required for his/her degree and does not need some of the credits gained abroad. Since the recognition will be granted to a group of components and it does not need to be based on a one to one correspondence between single educational components, the sending institution must foresee which provisions will apply if the student does not successfully complete some of the educational components from his study programme abroad. A web link towards these provisions should be provided in the Learning Agreement. The student will commit to reach a certain level of language competence in the main language of instruction by the start of the study period. The level of the student will be assessed after his/her selection with the Erasmus+ online assessment tool when available (the results will be sent to the sending institution) or else by any other mean to be decided by the sending institution. A recommended level has been agreed between the sending and receiving institutions in the inter-institutional agreement. In case the student would not already have this level when he/she signs the Learning Agreement, he/she commits to reach it with the support to be provided by the sending or receiving institution (either with courses that can be funded by the organisational support grant or with the Erasmus+ online tutored courses). All parties must sign the document; however, it is not compulsory to circulate papers with original signatures, scanned copies of signatures or digital signatures may be accepted, depending on the national legislation. * In countries where the "ECTS" system it is not in place, in particular for institutions located in partner countries not participating in the Bologna process, "ECTS" needs to be replaced in all tables by the name of the equivalent system that is used and a weblink to an explanation to the system should be added. The section to be completed during the mobility is needed only if changes have to be introduced into the original Learning Agreement. In that case, the section to be completed before the mobility should be kept unchanged and changes should be described in this section. Changes to the mobility study programme should be exceptional, as the three parties have already agreed on a group of educational components that will be taken abroad, in the light of the course catalogue that the receiving institution has committed to publish well in advance of the mobility periods and to update regularly as ECHE holder. However, introducing changes might be unavoidable due to, for example, timetable conflicts. Other reasons for a change can be the request for an extension of the duration of the mobility programme abroad. Such a request can be made by the student at the latest one month before the foreseen end date. These changes to the mobility study programme should be agreed by all parties within four to seven weeks (after the start of each semester). Any party can request changes within the first two to five-week period after regular classes/educational components have started for a given semester. The exact deadline has to be decided by the institutions. The shorter the planned mobility period, the shorter should be the window for changes. All these changes have to be agreed by the three parties within a two-week period following the request. In case of changes due to an extension of the duration of the mobility period, changes should be made as timely as possible as well. Changes to the study programme abroad should be listed in table C and, once they are agreed by all parties, the sending institution commits to fully recognise the number of ECTS credits as presented in table C. Any exception to this rule should be documented in an annex of the Learning Agreement and agreed by all parties. Only if the changes described in table C affect the group of educational components in the student's degree (table B) that will be replaced at the sending institution upon successful completion of the study programme abroad, a revised version should be inserted and labelled as "Table D: Revised group of educational components in the student's degree that will be replaced at sending institution". Additional rows and columns can be added as needed to tables C and D. All parties must confirm that the proposed amendments to the Learning Agreement are approved. For this specific section, original or scanned signatures are not mandatory and an approval by email may be enough. The procedure has to be decided by the sending institution, depending on the national legislation.
Security Procedures The Fund shall comply with data access operating standards and procedures and with user identification or other password control requirements and other security procedures as may be issued from time to time by State Street for use of the System on a remote basis and to access the Data Access Services. The Fund shall have access only to the Fund Data and authorized transactions agreed upon from time to time by State Street and, upon notice from State Street, the Fund shall discontinue remote use of the System and access to Data Access Services for any security reasons cited by State Street; provided, that, in such event, State Street shall, for a period not less than 180 days (or such other shorter period specified by the Fund) after such discontinuance, assume responsibility to provide accounting services under the terms of the Custodian Agreement.
Safety and Security Procedures Contractor shall maintain and enforce, at the Contractor Work Locations, industry-standard safety and physical security policies and procedures. While at each Court Work Location, Contractor shall comply with the safety and security policies and procedures in effect at such Court Work Location.
Review of Documentation The Depositor, by execution and delivery hereof, acknowledges receipt of the Mortgage Files pertaining to the Mortgage Loans listed on the Mortgage Loan Schedule, subject to review thereof by Xxxxx Fargo Bank National Association, LaSalle Bank National Association, Deutsche Bank National Trust Company and U.S. Bank National Association as applicable (each, a “Custodian” and, together, the “Custodians”), for the Depositor. Each Custodian is required to review, within 45 days following the Closing Date, each applicable Mortgage File. If in the course of such review the related Custodian identifies any Material Defect, the Seller shall be obligated to cure such Material Defect or to repurchase the related Mortgage Loan from the Depositor (or, at the direction of and on behalf of the Depositor, from the Trust Fund), or to substitute a Qualifying Substitute Mortgage Loan therefor, in each case to the same extent and in the same manner as the Depositor is obligated to the Trustee and the Trust Fund under Section 2.02(c) of the Trust Agreement.
