Site Specific Generation Conditions Sample Clauses

Site Specific Generation Conditions. 3.1 The specification of the Customer's Generating Plant is in accordance with Table 1. 3.2 Under the terms of this Connection Agreement the Customer's Generating Plant may operate in Parallel Mode. 3.3 The means of connecting and disconnecting the Customer's Generating Plant is shown on drawing [XXXX]. 3.4 The design and installation of the Earthing System for the Customer's Premises is the Customer's responsibility. The Customer may connect the Customer's High Voltage Apparatus to the Company's High Voltage Earthing System. It is the Customer's responsibility to ensure the earthing arrangements are adequate for the Customer's premises and no liability will be accepted by the Company if the Company's Earthing System is used. 3.5 The design and installation of the Protection for the Customer's Generating Plant is the Customer's responsibility. 3.6 The Customer warrants to the Company that the Customer has taken all reasonable measures and in any event acted in accordance with Good Industry Practice to design and install Protection systems which adequately protect the Customer's Plant and Apparatus and the Company's Distribution System. 3.7 The Customer's Protection and control systems shall be designed, operated and maintained so as to safely connect, operate and disconnect the Customer's Generating Plant in accordance with National Engineering Recommendation G59/2 (as may be updated or superseded from time to time). 3.8 Protection settings on the Customer's Plant and Apparatus at the Ownership Boundary and on the Interface Protection shall be agreed with the Company. The agreed Protection and settings are specified in Table 2. 3.9 The Customer shall allow the Company all reasonable access to witness the commissioning of the Customer's Interface Protection equipment when it is initially installed and following any future modifications to the arrangement and Operation of the Generating Plant, or Protection equipment. 3.10 The Customer shall re-test the Interface Protection at intervals not exceeding 3 years. The Customer shall, on request by the Company, provide the Company, within ten (10) working days of the request, with records of the Customer's Protection settings, test results, and any other applicable records, accounts, or documentation.
Sample 1
AutoNDA by SimpleDocs
Site Specific Generation Conditions. 3.1 The specification of the Customer's Generating Plant is in accordance with Table 1. 3.2 The means of connecting and disconnecting the Customer's Generating Plant is shown on drawing xx/xx/xxxx/A. 3.3 The design and installation of the Earthing System for the Customer's Premises is the Customer's responsibility. The Customer may connect the Customer's High Voltage Apparatus to the Company's High Voltage Earthing System. It is the Customer's responsibility to ensure the earthing arrangements are adequate for the Customer's premises and no liability will be accepted by the Company if the Company's Earthing System is used. 3.4 The design and installation of the Protection for the Customer's Generating Plant is the Customer's responsibility. The Customer warrants to the Company that the Customer has taken all reasonable measures and in any event acted in accordance with Good Industry Practice to design and install Protection systems which adequately protect the Customer's Plant and Apparatus and the Company's Distribution System.
Sample 1

Related to Site Specific Generation Conditions

  • ADDITIONAL SPECIAL CONTRACT CONDITIONS Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Interconnection Facilities Engineering Procurement and Construction Interconnection Facilities, Network Upgrades, and Distribution Upgrades shall be studied, designed, and constructed pursuant to Good Utility Practice. Such studies, design and construction shall be based on the assumed accuracy and completeness of all technical information received by the Participating TO and the CAISO from the Interconnection Customer associated with interconnecting the Large Generating Facility.

  • – OTHER SPECIAL CONDITIONS ARTICLE 8.01 - INAPPLICABILITY OF THE NO-PROFIT PRINCIPLE

  • System Upgrade Facilities and System Deliverability Upgrades Connecting Transmission Owner shall design, procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Appendix A hereto. The responsibility of the Developer for costs related to System Upgrade Facilities and System Deliverability Upgrades shall be determined in accordance with the provisions of Attachment S to the ISO OATT.

  • Notice to Proceed - Site Improvements The Recipient shall not commence, or cause to be commenced, any site improvements or other work on the Land until the Director has issued a Notice to Proceed to the Recipient. Such Notice to Proceed will not be issued until the Director is assured that the Recipient has complied with all requirements for the approval of a grant under Revised Code Sections 164.20 through 164.27 and has completed any land acquisition required by the Project. A Notice to Proceed shall be required for all Project prime contractors or direct procurement initiated by the Recipient following execution of this Agreement.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Connecting Transmission Owner’s Scope of Work and Responsibilities The Connecting Transmission Owner will design, construct, own, operate and maintain all Connecting Transmission Owner’s Interconnection Facilities, except as otherwise stated above and in the Project Specific Specifications. The Connecting Transmission Owner will complete all engineering reviews, field verifications and witness testing, etc. in accordance with the ESBs and the Project Specific Specifications. Connecting Transmission Owner shall provide the revenue metering CT/PT units and meter socket enclosure. The Connecting Transmission Owner shall: • provide, run, and wire both ends of the color-coded cable for the revenue metering instrument transformer secondary wiring; • perform all terminations; and • supply and install the meter. The revenue meter may require a communications link to the RTU. The Connecting Transmission Owner will specify and run those communications cables. The Connecting Transmission Owner shall complete all wiring, testing and commissioning of the RTU.

  • CLOUD SPECIFIC TERMS AND CONDITIONS To the extent that Contractor has received an award for Lot 3, Cloud, the following terms and conditions apply to Lot 3, Cloud. For the duration of an Authorized User Agreement, the Cloud Solution shall conform to the Cloud Solution Manufacturer’s specifications, Documentation, performance standards (including applicable license duration, warranties, guarantees, Service Level Agreements, service commitments, and credits). Contractor is responsible for providing physical and logical security for all Data, infrastructure (e.g. hardware, networking components, physical devices), and software related to the services the Contractor is providing under the Authorized User Agreement. All Data security provisions agreed to by the Authorized User and Contractor within the Authorized User Agreement may not be diminished for the duration of the Authorized User Agreement without prior written agreement by the parties amending the Authorized User Agreement.

  • Construction Phase Services 3.1.1 – Basic Construction Services

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!