Timer Sample Clauses

Timer. Power to main canopy/fascia signage shall be controlled through a 24-hour, seven-day timer to be installed and maintained by the Lessor. The location of sign timer shall be in the vicinity of the multi-circuit electrical panel.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Timer. 4. Whenever a bargaining unit member is to be assigned in excess of adjunct hours to any duties described in C2 or C3 above, the District shall use the following procedure.
Sample 1
Timer. ‌ The Timer step inserts a delay in the test sequence. The Timer step design window is shown below. Use the Time Controls to enter the desired delay time. The SECONDS value can be entered in SS.SSSS format. The time value is also shown in the value column of the step table. When a test sequence runs a Timer step, the progress/time indicators update. Pressing the Stop Button in the Run Toolbar stops the test with "Stopped" results. When the Timer step is allowed to complete the test sequence proceeds with the next step. The text Test Engineer enter in the Comment box automatically appears in the step table and test report.
Sample 1
Timer. The time displayed in the application’s timer is approximate. Unavailability The Service may be temporarily unavailable due to technical difficulties, defects, weather conditions or other situations beyond our control. In such cases, you are responsible for paying for parking directly at a physical pay station in order to avoid being issued a parking ticket. Prohibitions As a condition to use of the Service, you agree not to:
Sample 1
Timer. The time after which an automatic switching to the next step. Value should be in milliseconds (ms).
Sample 1
Timer. For shock: PDT56ED drop tester Requires at a minimum a 6’ x 6’ space 110 volts with 6 amps 90 psi of air For vibration: MS400 mechanical shaker Requires at a minimum a 10’ x 10’ space 220 volt single phase with 15 amps For Compression: Squeezer compression machine Requires at a minimum a 6’ x 6’ space 220 volts single phase with 5 amps
Sample 1
Timer. SECTION 1 The Company may recruit part time employees (whom will not work less than 20 hours a week not more than 26 hours a week). The schedule of monthly hours will be distributed equitably using seniority as criteria and will be notified with ten (10) days in advance. The regular part timers employees will be recruited as Sales Consultant and Customer Service Coordinators (ACD) and Customer Service Coordinators in Financial Services Division in the Sections of In Bound and Hot Line, Operational Support Technician I (1283027), Information Systems Support Technician I (1083025), Customer Service Consultant I (1084004), Whole Sales Coordinator I (1085025), Whole Sales Accounts Specialist I (0000000), Customer Services Technical Adviser I (1383013), and Wireline Service Coordinator I (1282023). The benefits and dispositions included in this contract will apply in proportion to the hours worked: Vacations, Sick Leave, Extended Sick Leave, Occupational Sick Leave and Economic Aid for Studies. Section 1 and 2 of the Article 51 - Publication of Work Shifts and the last sentence of Section 1 of Article 26 - Workday and Overtime, will not apply to regular part time employees. The disposition in Article 12 - Probationary Period will apply to these employees.
Sample 1
AutoNDA by SimpleDocs
Timer. This block performs a counting operation. It counts in either the up or down direction, from a pre-set value to a target value. Upon reaching the target or timeout condition, a contact may be closed. This block also supports conditional next block processing. This block will time up to one (1) year. The timer block may be started, stopped, reset or resumed based on a sensed condition or operator command.
Sample 1

Related to Timer

  • Licensor any Person from whom a Grantor obtains the right to use any Intellectual Property. Lien: any Person’s interest in Property securing an obligation owed to, or a claim by, such Person, whether such interest is based on common law, statute or contract, including liens, security interests, pledges, hypothecations, statutory trusts, reservations, exceptions, encroachments, easements, rights-of-way, covenants, conditions, restrictions, leases, and other title exceptions and encumbrances affecting Property. Lien Waiver: an agreement, in form and substance satisfactory to Collateral Agent, by which (a) for any material Collateral located on leased premises, the lessor waives or subordinates any Lien it may have on the Collateral, and agrees to permit Collateral Agent to enter upon the premises and remove the Collateral or to use the premises to store or dispose of the Collateral; (b) for any Collateral held by a warehouseman, processor, shipper, customs broker or freight forwarder, such Person waives or subordinates any Lien it may have on the Collateral, agrees to hold any Documents in its possession relating to the Collateral as agent for Collateral Agent, and agrees to deliver the Collateral to Collateral Agent upon request; (c) for any Collateral held by a repairman, mechanic or bailee, such Person acknowledges Collateral Agent’s Lien, waives or subordinates any Lien it may have on the Collateral, and agrees to deliver the Collateral to Collateral Agent upon request; and (d) for any Collateral subject to a Licensor’s Intellectual Property rights, the Licensor grants to Collateral Agent the right, vis-à-vis such Licensor, to enforce Collateral Agent’s Liens with respect to the Collateral, including the right to dispose of it with the benefit of the Intellectual Property, whether or not a default exists under any applicable License.

  • Licensee Licensee represents and warrants that:

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • IBM Credit may in its sole discretion from time to time decide the amount of credit IBM Credit extends to Customer, notwithstanding any prior course of conduct between IBM Credit and Customer. IBM Credit may combine all of its advances to make one debt owed by Customer.

  • AMD AMD shall keep records in sufficient detail to enable FoundryCo to determine that AMD has complied with its second sourcing limitations in Section 2.1(b) and its GPU Product volume sourcing commitments in Section 2.1(c). AMD shall permit said records to be inspected, at FoundryCo’s expense, upon reasonable advance notice, during regular business hours by an independent auditor selected by FoundryCo and approved by AMD, which approval shall not be unreasonably withheld. The audit shall be for the purpose of verifying that AMD has complied with its second source restrictions in Section 2.1(b) and its GPU Product sourcing commitments in Section 2.1(c). Inspections conducted under this Section 8.1(b) shall be at FoundryCo’s expense, unless AMD has a non-compliance variance adverse to FoundryCo of [****] percent ([****]%) or more of (i) the relevant [****] percent ([****]%) second source restriction or (ii) the GPU Minimum Percentage for the applicable audited period, in which case AMD shall bear the reasonable expenses of such audit.

  • Manufacturing and Marketing Rights The Company has not granted rights to manufacture, produce, assemble, license, market, or sell its products to any other person and is not bound by any agreement that affects the Company's exclusive right to develop, manufacture, assemble, distribute, market, or sell its products.

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

  • Supplier A manufacturer, fabricator, distributor, supplier, or vendor of goods or equipment in connection with the Work, or any other party having a Contract or Purchase Order with the Contractor or with a Subcontractor to furnish materials or equipment to be incorporated in the Work by the Contractor or a Subcontractor.

  • Compatibility 1. Any unresolved issue arising from a mutual agreement procedure case otherwise within the scope of the arbitration process provided for in this Article and Articles 25A to 25G shall not be submitted to arbitration if the issue falls within the scope of a case with respect to which an arbitration panel or similar body has previously been set up in accordance with a bilateral or multilateral convention that provides for mandatory binding arbitration of unresolved issues arising from a mutual agreement procedure case.

Time is Money Join Law Insider Premium to draft better contracts faster.