Utility Bill Energy Audit Sample Clauses

Utility Bill Energy Audit for Option C verified ECMs – HONEYWELL will provide Option C energy guarantee auditing services as detailed in Attachment F, Attachment G, and Exhibits to Attachment G for specific Energy Conservation Measures (ECMs) identified in Attachment G and/or Exhibits to Attachment G as using Option C methodologies for Measurement and Verification to quantify the derived Energy Cost Avoidance of the CUSTOMER’s facility. Under Option C services, HONEYWELL will analyze CUSTOMER’S energy use and costs against an “established baseline” described in Attachment G and Exhibits to Attachment G. HONEYWELL will use energy auditing software to track monthly facility costs, energy consumption, and Energy Cost Avoidance and to quantify and report on changes in energy usage due to changes in billing periods and weather. HONEYWELL will adjust the baseline for changes in energy usage due to changes in variables including, but not limited to billing periods, weather, production, occupancy, building load, conditioned building area, equipment operation, and scheduling methodologies etc. as defined in Attachment F and G. These routine and non-routine baseline adjustments will be calculated using industry-standard engineering calculations. As applicable per Attachment F and G, HONEYWELL will adjust the energy cost baseline for changes in the unit cost of energy. Work Coverage: Fuel Savings Only for All Applicable ECMs Term Coverage: Year 1 to End of Term Option C Audit Report section will be submitted: 1-Time Only Semi-Annually Quarterly Annually 1.1 Scope – HONEYWELL will maintain and inspect the building automation hardware and software listed below: List of Covered Equipment:
Sample 1
AutoNDA by SimpleDocs
Utility Bill Energy Audit for Option C verified ECMs – HONEYWELL will provide Option C energy guarantee auditing services as detailed in Attachment D and Exhibits to Attachment D for specific Energy Conservation Measures (ECMs) identified in Attachment D and/or Exhibits to Attachment D as using Option C methodologies for Measurement and Verification to quantify the derived Energy Cost Avoidance of the CUSTOMER’s facility. Under Option C services, HONEYWELL will analyze CUSTOMER’S energy use and costs against an “established baseline” described in Attachment D and Exhibits to Attachment D. HONEYWELL will use energy auditing software to track monthly facility costs, energy consumption, and Energy Cost Avoidance and to quantify and report on changes in energy usage due to changes in billing periods and weather. HONEYWELL will adjust the baseline for changes in energy usage due to changes in variables including, but not limited to billing periods, weather, production, occupancy, building load, conditioned building area, equipment operation, and scheduling methodologies etc. as defined in Attachment D and Exhibits to Attachment D. These routine and non-routine baseline
Sample 1

Related to Utility Bill Energy Audit

  • Payment of Utilities Pay for electricity and all other utilities consumed in or relating to the Subject Unit and proportionately for the Common Portions.

  • Utility Services Company agrees to pay the full cost and expense associated with its use of all utilities, including but not limited to water, sanitary sewer, electric, storm drainage, and telecommunication services.

  • Statewide HUB Program Statewide Procurement Division Note: In order for State agencies and institutions of higher education (universities) to be credited for utilizing this business as a HUB, they must award payment under the Certificate/VID Number identified above. Agencies, universities and prime contractors are encouraged to verify the company’s HUB certification prior to issuing a notice of award by accessing the Internet (xxxxx://xxxxx.xxx.xxxxx.xx.xx/tpasscmblsearch/index.jsp) or by contacting

  • Local Utility Services XOOM is an independent retail marketer of natural gas and is not affiliated with your local utility. Your local utility will continue to deliver your natural gas, read your meter, send your bill, and make necessary repairs. Your local utility will also respond to emergencies and provide other basic utility services as required. XOOM is not an agent of your local utility and your utility will not be liable for any of XOOM’s acts, omissions, or representations.

  • Information Systems Acquisition Development and Maintenance a. Client Data – Client Data will only be used by State Street for the purposes specified in this Agreement.

  • Public Utilities No Restricted Entity or Affiliate thereof is a "holding company," or a "subsidiary company" of a "holding company," or an "affiliate" of a "holding company" or of a "subsidiary company" of a "holding company," within the meaning of the Public Utility Holding Company Act of 1935, as amended. No Restricted Entity or Affiliate thereof is a regulated public utility.

  • Construction Phase Services 3.1.1 – Basic Construction Services

  • Interconnection Customer Compensation If the CAISO requests or directs the Interconnection Customer to provide a service pursuant to Articles 9.6.3 (Payment for Reactive Power) or 13.5.1 of this LGIA, the CAISO shall compensate the Interconnection Customer in accordance with the CAISO Tariff.

  • Electric Storage Resources Developer interconnecting an electric storage resource shall establish an operating range in Appendix C of its LGIA that specifies a minimum state of charge and a maximum state of charge between which the electric storage resource will be required to provide primary frequency response consistent with the conditions set forth in Articles 9.5.5, 9.5.5.1, 9.5.5.2, and 9.5.5.3 of this Agreement. Appendix C shall specify whether the operating range is static or dynamic, and shall consider (1) the expected magnitude of frequency deviations in the interconnection; (2) the expected duration that system frequency will remain outside of the deadband parameter in the interconnection; (3) the expected incidence of frequency deviations outside of the deadband parameter in the interconnection; (4) the physical capabilities of the electric storage resource; (5) operational limitations of the electric storage resources due to manufacturer specification; and (6) any other relevant factors agreed to by the NYISO, Connecting Transmission Owner, and Developer. If the operating range is dynamic, then Appendix C must establish how frequently the operating range will be reevaluated and the factors that may be considered during its reevaluation. Developer’s electric storage resource is required to provide timely and sustained primary frequency response consistent with Article 9.5.5.2 of this Agreement when it is online and dispatched to inject electricity to the New York State Transmission System and/or receive electricity from the New York State Transmission System. This excludes circumstances when the electric storage resource is not dispatched to inject electricity to the New York State Transmission System and/or dispatched to receive electricity from the New York State Transmission System. If Developer’s electric storage resource is charging at the time of a frequency deviation outside of its deadband parameter, it is to increase (for over-frequency deviations) or decrease (for under-frequency deviations) the rate at which it is charging in accordance with its droop parameter. Developer’s electric storage resource is not required to change from charging to discharging, or vice versa, unless the response necessitated by the droop and deadband settings requires it to do so and it is technically capable of making such a transition.

  • New utilities (i) The Contractor shall allow, subject to the permission from the Authority and such conditions as the Authority may specify, access to, and use of the Site for laying telephone lines, water pipes, electricity lines/ cables or other public utilities. Where such access or use causes any financial loss to the Contractor, it may require the user of the Site to pay compensation or damages as per Applicable Laws. For the avoidance of doubt, it is agreed that use of the Site under this Clause 9.3 shall not in any manner relieve the Contractor of its obligation to construct and maintain the Project Highway in accordance with this Agreement and any damage caused by such use shall be restored forthwith at the cost of the Authority. (ii) The Authority may, by notice, require the Contractor to connect any adjoining road to the Project Highway, and the connecting portion thereof falling within the Site shall be constructed by the Contractor at the Authority’s cost in accordance with Article 10. (iii) The Authority may by notice require the Contractor to connect, through a paved road, any adjoining service station, hotel, motel or any other public facility or amenity to the Project Highway, whereupon the connecting portion thereof that falls within the Site shall be constructed by the Contractor on payment of the cost. The cost to be paid by the Authority to the Contractor shall be determined by the Authority’s Engineer. For the avoidance of doubt, in the event such road is to be constructed for the benefit of any entity, the Authority may require such entity to make an advance deposit with the Contractor or the Authority, as the case may be, of an amount equal to the estimated cost as determined by the Authority’s Engineer and such advance shall be adjusted against the cost of construction as determined by the Authority’s Engineer hereunder. (iv) In the event construction of any Works is affected by a new utility or works undertaken in accordance with this Clause 9.3, the Contractor shall be entitled to a reasonable Time Extension as determined by the Authority’s Engineer.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!