Data Output definition

Data Output means the maps, reports or other information generated by analyzing or processing Subscription Data, including geocode coordinates or address corrections appended to Licensee database records.
Sample 1Sample 2Sample 3
Data Output means the maps, reports or other information generated by analyzing or processing Subscription Data, including geocode coordinates or address corrections appended to State database records.
Sample 1Sample 2
Data Output means data, reports or information of any kind made available to the Client and/or created directly or indirectly as a result of the Specified Services
Sample 1

Examples of Data Output in a sentence

  • When /CS is high the device is deselected and the Serial Data Output (DO, or IO0, IO1, IO2, IO3) pins are at high impedance.

  • During a /HOLD condition, the Serial Data Output (DO) is high impedance, and Serial Data Input (DI) and Serial Clock (CLK) are ignored.

  • The Data Output interface consists of the output parameters of the API functions.

  • Licensee may use Data Output to derive conclusions or recommendations that form part of Licensee’s services to its customers, but Licensee may not provide Data Output as part of those services.

  • This section describes the physical ports and the interfaces that provide for Data Input, Data Output, Control Input, and Status Output.

  • Any authorized disclosure of Data Output to third parties must prohibit those third parties from selling, sublicensing or disclosing the Data Output to additional third parties and from using the Data Output for any purpose other than as authorized in the applicable Order(s).

  • Additional terms of authorized use are as set forth in the applicable Order, and may include limitations on: (i) the number of Users; (ii) the Application authorized to access the Licensed Products and use the Data Output; and (iii) the number of Transactions processed or Data Records accessed using the Licensed Products.

  • The physical interfaces provided by the module are mapped to five FIPS 140-2 defined logical interfaces: Data Input, Data Output, Control Input, Status Output, and Power.

  • In master mode, this line is driven by the MSP; in slave mode, an external I2S word strobe has to be supplied.Pin 6, I2S_DA_OUT – I2S Data Output (Fig.

  • The W25N01GV is accessed through an SPI compatible bus consisting of four signals: Serial Clock (CLK), Chip Select (/CS), Serial Data Input (DI) and Serial Data Output (DO).


More Definitions of Data Output

Data Output means the maps, reports or other information that you generate by analyzing or processing Data Products, including geocode coordinates or cluster segmentation assignments appended to your database records. “Derived Data” means the result generated by combining, or performing mathematical calculations on, variables or fields of Data Products, extracting subsets of Data Products, and combining Data Products or portions of them with your data or third party data. “Derivative Works” means a work that is based upon, or that translates, recasts or adapts a Product. “Device” means a single personal computer, laptop, workstation, terminal, personal digital assistant, or other computing device. “Documentation” means the user documentation that accompanies the Products. “Effective Date” means the date when the parties entered into this Agreement. “Entitlement” is a proof of purchase of a particular type and number of Licences. “Maintenance” means Pitney Xxxxx MapInfo’s delivery to you of updates or upgrades to Software Products as they become commercially available. “Named User” means a single named person. “Order Form” means the order form attached to this licence or other ordering documentation such as your purchase order. “Power Unit” means one megahertz of power in a CPU. “Products” means the Software Products or Data Products we licence to you under this Agreement. “Server” means a computer with one or more central processing units that provides services to other computers over a network. “Server Licence” means a Power Unit, CPU or SAU licence. “Service Bureau” means a data processing center performing processing, cleansing, analysis and other services on data for third parties. “Single Application User” or “SAU” means a single named person or Device authorized to access a single application.
Sample 1
Data Output means any data, reports, analysis or other output developed by or on behalf of Client that are derived from FullContact Data.
Sample 1
Data Output means the maps, reports or other information that you generate by analyzing or processing Data Products, including geocode coordinates or cluster segmentation assignments appended to your database records. “Derived Data” means the result generated by combining, or performing mathematical calculations on, variables or fields of Data Products, extracting subsets of Data Products, and combining Data Products or portions of them with your data or third party data. “Derivative Works” means a work that is based upon, or that
Sample 1

Related to Data Output

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • Data Log means a complete record of all Data Interchanged representing the Messages and their Associated Data between the parties;

  • data user means a natural or legal person who has lawful access to certain personal or non-personal data and is authorised to use that data for commercial or non-commercial purposes;

  • Network Data Mover (NDM) or “Connect Direct” means the industry standard protocol for transferring information electrically.

  • Outputs means the goods or services that are produced by an entity or other person;

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Data Processing Equipment means any equipment, computer hardware, or computer software (and the lease or licensing agreements related thereto) other than Personal Computers, owned or leased by the Failed Bank at Bank Closing, which is, was, or could have been used by the Failed Bank in connection with data processing activities.

  • Attachment point means a point on the network at which network assets are connected to assets owned by another person.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Generation Interconnection Customer means an entity that submits an Interconnection Request to interconnect a new generation facility or to increase the capacity of an existing generation facility interconnected with the Transmission System in the PJM Region.

  • User Interface(s means any technologies thatiii. Customer owns and/or for which Customer has secured an appropriate license/subscription and is/areiv. used to develop/manage user interaction features and characteristics for ERP. Solely for clarity regarding ERP licensing requirements under a contract, User Interfaces for ERP shall be deemed part of ERP and therefore require human users Using ERP via such User Interfaces to have a “Named User” and/or “User” license for ERP, as applicable.

  • Interconnection Customer means a Generation Interconnection Customer and/or a Transmission Interconnection Customer.

  • Customer-generator means a user of a net metering system.

  • Net metering customer means a customer of the electric distribution company

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • User Interface means the interface for the Hosted Services designed to allow individual human users to access and use the Hosted Services.

  • Interconnector means a transmission line which crosses or spans a border between Member States for the purpose of connecting the national transmission system of those Member States or a transmission line between a Member State and a third country up to the territory of the Member States or the territorial sea of that Member State;

  • Processing Plant means plant systems, located on or off the Leased Premises, that include a gas processing plant, natural gasoline plant, gasoline plant, or other plant where raw unprocessed natural gas is processed to remove or extract Raw Mix from the natural gas stream to produce a Pipeline- Quality Natural Gas or Residue Gas and other products, and the Raw Mix is then either (i) separated by fractionation down to its base components prior to storage and/or transport that meets or conforms to all applicable Gas Processors Association (GPA) Standards and/or Specifications for the commercial sale of each liquefiable hydrocarbon product, or (ii) transported to another plant for separation down to its base components by fractionation prior to storage and/or transport for the commercial sale of each liquefiable hydrocarbon product. Any deductions, costs, or processing fees associated with the removal or recovery of Natural Gas Liquids is strictly limited to only that part of any Processing Plant or facility where Raw Mix is recovered, and if applicable at that plant, also fractionated to their component parts.

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Customer System means the Customer's computing environment (consisting of hardware, software and/or telecommunications networks or equipment) used by the Customer or the Supplier in connection with this Contract which is owned by or licensed to the Customer by a third party and which interfaces with the Supplier System or which is necessary for the Customer to receive the Services;

  • smart metering system means an electronic system that is capable of measuring electricity fed into the grid or electricity consumed from the grid, providing more information than a conventional meter, and that is capable of transmitting and receiving data for information, monitoring and control purposes, using a form of electronic communication;

  • Custom Local Area Signaling Service Features (CLASS) means certain call-management service features that are currently available from SBC-13STATE’s local networks. These could include: Automatic Call Back; Automatic Recall; Call Trace; Caller Identification and related blocking features; Calling Number Delivery; Customer Originated Trace; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.

  • Excluded Downtime has the meaning set forth in Section 2 below.