Redelivery Check definition

Redelivery Check means Lessee’s next due block “C” check in accordance with the Maintenance Program during the Term and the revision of the MPD in effect six months prior to the Expiry Date, and includes all inspections, checks and work up to and including those required every [REDACTED] of operation;
Sample 1
Redelivery Check has the meaning given in the Aircraft Lease Agreement.
Sample 1Sample 2Sample 3
Redelivery Check is defined in Appendix H.
Sample 1Sample 2

Examples of Redelivery Check in a sentence

  • All Documents and Records shall reflect the Redelivery condition and current status of the Aircraft at time of Redelivery, including all modifications and maintenance activity performed on the Redelivery Check.

  • Lessee will notify and provide Lessor with a schedule for the Redelivery of the Aircraft not later than 30 days prior to the commencement of the Redelivery Check, and Schedule 4 shall apply in relation to the Redelivery Check.

  • All expenses associated with the Redelivery Check, in accordance with this Clause 12 and Schedule 4, and any other Redelivery requirement, will be at the expense of the Lessee, unless specifically noted in this Agreement, or otherwise mutually agreed in writing.

  • During the Redelivery Check, the Lessee shall, at its own expense, make the Aircraft and all records relating to the Aircraft available to the Lessor for inspection in order to verify that the condition of the Aircraft complies with the provisions of the Lease.

  • Save for the Lessor’s payment of the C-Check Costs, the remaining costs of such Redelivery Check and of all other work necessary to get the Aircraft into the condition required by the Lease at the time of redelivery to the Lessor, ordinary wear and tear excepted, shall be borne by the Lessee.

  • FINAL INSPECTION The series of inspections to be conducted by Lessor or Lessor's representative during the course of the Redelivery Check and up to Redelivery of the Aircraft.


More Definitions of Redelivery Check

Redelivery Check. The next due heavy maintenance visit which shall include but not be limited to accomplishment of a block C Check so that all scheduled and out of phase inspection have been cleared for [***]Flight Hours and [***]Cycles and [***] months. Where relevant, the work-scope and intervals (calendar and/or hourly) shall not be less than those prescribed by the then current Manufacturer’s Maintenance Planning Document block maintenance program. Weights: The Aircraft shall have the following weights: MTOW of [***] Lbs. MZFW of [***] Lbs. MLW of [***] Lbs. Airworthiness certification basis and operational standard: FAA. In a condition suitable for immediate operation under FAR 121 requirements. AD Compliance Period: ADs with clearance of [***] days or the equivalent flight hours and cycles and in the case of Engine fan blades with more than [***]cycles since new, the fan blade dovetail ultrasonic inspection per SB 72-1033 or eddy current inspection per ESM will have been performed no more than [***] cycles prior to Delivery. Aircraft configuration: Boeing 737-83N configuration with a Rigid Cargo Barrier and an ANCRA CLS capable of the following configurations full time: a) (11) 88” X 125” or b) (11) 88” X 108” or c) (9) 96” X 125” or d) (22) 62”X 88”, if the configuration in this (d) was provided to Sublessee on the Delivery Date. Livery: The fuselage shall be freshly painted a livery advised by Sublessor. Engine Thrust Setting: [***] Minimum APU Limit: [***] Minimum Component Calendar Life: [***] Minimum Component Cycles: [***] Minimum Component Flight Hours: [***] Minimum Engine Cycles: [***] Minimum Engine LLP Cycles: [***] Minimum Engine Flight Hours: [***] Minimum Landing Gear Calendar Time: [***] Minimum Landing Gear Cycles: [***] Required EGT Margin: Each Engine will have sufficient EGT margin to achieve the Minimum Engine Hours and Minimum Engine Cycles at full take-off thrust on flat rated sea level day. Redelivery Location: Location within the 48 contiguous United States as notified by Sublessee to Sublessor or such other location as may be agreed between Sublessor and Sublessee
Sample 1Sample 2
Redelivery Check means [***];
Sample 1Sample 2
Redelivery Check. Ex the next sequential "C" Check, or higher check if applicable, in block format so that all airframe inspections falling due within the next following ***** Flight Hours of operation in accordance with the Manufacturer's Maintenance Planning Document have been accomplished Required EGT Margin: AD Compliance Period: ***** days Additional Return Condition Requirements: Yes, as set forth on Schedule G TAX Lessor/Owner Tax Jurisdiction: United States MACRS indemnity applies: Yes, as set forth on Schedule H Foreign Tax Indemnity applies: Yes, as set forth on Schedule H CONFIDENTIAL TREATMENT HAS BEEN REQUESTED BY KITTY HAWK, INC. FOR CERTAIN PORTIONS OF THIS DOCUMENT. CONFIDENTIAL PORTIONS HAVE BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION. OMITTED PORTIONS ARE INDICATED IN THIS AGREEMENT WITH "*****". ALL THE PROVISIONS OF THE SCHEDULES HERETO AND THE COMMON TERMS AGREEMENT ARE INCORPORATED BY REFERENCE HEREIN AND ARE PART OF THIS AIRCRAFT LEASE AGREEMENT AS IF THEY WERE SET OUT IN FULL HEREIN. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, BY ITS SIGNATURE BELOW, LESSEE ACKNOWLEDGES AND AGREES THAT THE LEASE OF THE AIRCRAFT HEREUNDER IS ON AN "AS IS, WHERE IS" BASIS AND THAT THE DISCLAIMERS, EXCULPATIONS AND LIMITATIONS OF LIABILITY, INDEMNITIES, THE CHOICE OF NEW YORK LAW AS THE GOVERNING LAW, LESSEE'S SUBMISSION TO PERSONAL JURISDICTION IN NEW YORK, AND THE WAIVER OF ANY RIGHT TO A TRIAL BY JURY PROVIDED FOR IN THE COMMON TERMS AGREEMENT ARE INCORPORATED HEREIN BY SUCH REFERENCE AND ARE PART OF THIS AGREEMENT AS IF THE SAME WERE SET OUT IN FULL HEREIN. No provision of this Lease, including any provision of the Schedules or the Common Terms Agreement, may be amended, rescinded, changed, waived, discharged, terminated or otherwise modified in any way whatsoever, except by a writing signed by the party to be charged. Pursuant to and to comply with Section (2) of Section 2A-208 of the UCC, if and to the extent applicable, Lessor and Lessee acknowledge their agreement to the provisions of this Section by their signatures below. This Aircraft Lease Agreement may be executed in two or more counterparts, each of which shall be deemed an original, but all of which together shall constitute one and the same instrument.
Sample 1
Redelivery Check means Lessee’s next due [Boeing: block “C” check][Embraer: “base” check] in accordance with the Maintenance Program during the Term and the revision of the MPD in effect six months prior to the Expiry Date, and includes all inspections, checks and work up to and including those required every [12,000 Flight Hours, 6,600 Flight Cycles and 36 calendar months of operation] 20 [16,000 Flight Hours, 6,600 Flight Cycles and 36 calendar months of operation]21[16,000 Flight Hours and 36 calendar months of operation]22 [7,000 Flight Hours and 6,250 Flight Cycles of operation]23;
Sample 1
Redelivery Check. ’ means the C-Check;
Sample 1

Related to Redelivery Check

  • Redelivery means the delivery of gas, excluding Firm Gas and Unauthorized Gas, to a Customer by KUB.

  • Delivery Charge means the total amount charged to the Authorized User for shipment of the Vehicle(s) from the Delivery Origin to the location(s) designated by the Authorized User on Form A: Mini-Bid Request, and on the Purchase Order.

  • Delivery vessel means tank trucks or trailers equipped with a storage tank and used for the transport of gasoline from sources of supply to stationary tanks of gasoline dispensing facilities.

  • Delivery Instructions means the instructions set out in the Contract for the provision of the Goods and Services, including any other information the Authority considers appropriate to the provision of the Goods and Services.

  • Delivery Month means each month specified as such by the Exchange pursuant to

  • Delivery charges means charges by the seller for preparation and delivery to a location designated by the purchaser of tangible personal property or services. Delivery charges include, but are not limited to, transportation, shipping, postage, handling, crating, and packing. Beginning September 1, 2004, delivery charges do not include the charges for delivery of direct mail if the charges are separately stated on an invoice or similar billing document given to the purchaser. If a shipment includes both exempt property and taxable property, the seller shall allocate the delivery charge using 1 of the following methods:

  • Delivery Location means the Supplier's premises or other location where the Services are to be supplied, as set out in the Order;

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Delivery Site means the places specified in the Delivery Schedule for the purpose of Delivery or Installation of the Supplies and Services, or any other places nominated by the Engineer and notified in writing to the Contractor;

  • Delivery Point means the point(s) of connection(s) at which energy is delivered into the Grid System i.e. the Interconnection Point.

  • Delivery Points means: (i) for natural gas transported by interstate pipelines, the city gate stations of your Utility, and (ii) for electricity, one or more points at which Company, as your agent, has arranged for the delivery of electricity to a third party (such as your Utility) for your account or at your premises.

  • Delivery Schedule means the schedule for the delivery of Services as set forth in attached Annex 3.

  • Periodic Billing Requirement means, for any Remittance Period, the aggregate amount of Charges calculated by the Servicer as necessary to be billed during such period in order to collect the Periodic Payment Requirement on a timely basis.

  • Delivery Time means the time for Delivery stated in the Purchase Order.

  • Delivery service means the providing of electric transmission or distribution to a retail customer.

  • Delivery Services means those services provided by the

  • Service delivery area means the defined geographic area for delivery of program services.

  • Loading Port means the port of Port Hedland or if iron ore is not shipped, or is not shipped from that port, then such port (which may include the port of Port Hedland) as the Minister may determine for the purpose of this definition;

  • Purchase Order (PO) means a written offer made by a purchaser to a supplier formally stating the terms and conditions of a proposed transaction.

  • Contract Item or “Contract Items” means the list of items identified in Section

  • Firm Order Confirmation or "FOC" means the notice CenturyLink provides to CLEC to confirm that CLEC's Local Service Order (LSR) has been received and has been successfully processed. The FOC confirms the schedule of dates committed to by CenturyLink for the Provisioning of the service requested.

  • IITK Purchase Order means the IITK’s official Purchase Order document;

  • Dosimetry processor means an individual or an organization that processes and evaluates individual monitoring devices in order to determine the radiation dose delivered to the monitoring devices.

  • Punchlist Items means any items necessary at the time of the issuance of a temporary certificate of occupancy to complete fully the renovation of the Project Facilities in accordance with the Plans and Specifications for the Project Facilities, or required for the issuance of a final certificate of occupancy or its equivalent.

  • Attachment point means a point on the network at which network assets are connected to assets owned by another person.

  • Purchase Order means the form or format a Customer uses to make a purchase under the Contract (e.g., a formal written purchase order, electronic purchase order, procurement card, contract or other authorized means).