Sludge requirements definition

Sludge requirements means the following statutory provisions and reg- ulations or permits issued thereunder (or more stringent State or local regu- lations): Section 405 of the Clean Water Act; the Solid Waste Disposal Act (SWDA) (including title II more com- monly referred to as the Resource Con- servation Recovery Act (RCRA) and State regulations contained in any State sludge management plan pre- pared pursuant to subtitle D of SWDA); the Clean Air Act; the Toxic Sub- stances Control Act; and the Marine Protection, Research and Sanctuaries Act.(2) General. Any POTW receiving wastes from an Industrial User to which a categorical Pretreatment Standard(s) applies may, at its discre- tion and subject to the conditions of this section, grant removal credits to reflect removal by the POTW of pollut- ants specified in the categorical Pretreatment Standard(s). The POTW may grant a removal credit equal to or, at its discretion, less than its con- sistent removal rate. Upon being grant- ed a removal credit, each affected In- dustrial User shall calculate its revised discharge limits in accordance with Environmental Protection Agency § 403.7 paragraph (a)(4) of this section. Re- moval credits may only be given for in- dicator or surrogate pollutants regu- lated in a categorical Pretreatment Standard if the categorical Pretreatment Standard so specifies.(3) Conditions for authorization to give removal credits. A POTW is authorized to give removal credits only if the fol- lowing conditions are met:(i) Application. The POTW applies for, and receives, authorization from the Approval Authority to give a removal credit in accordance with the require- ments and procedures specified in para- graph (e) of this section.(ii) Consistent removal determination. The POTW demonstrates and continues to achieve consistent removal of the pollutant in accordance with paragraph
Sample 1Sample 2Sample 3
Sludge requirements means the following statutory provisions and regulations or permits issued pursuant to them: section 405 of the federal clean water act; 33 USC 1251 et seq.; the solid waste disposal act (SWDA), 42 USC 6901 et seq.; the federal clean air act, 42 USC 1857 et seq.; the toxic substances control act, 15 USC 2601 et seq.; the marine protection, research and sanctuaries act, 33 USC 1401 et seq.; and ch. 281, Stats.
Sample 1Sample 2Sample 3
Sludge requirements means any of the following permits or regulations: 35 Ill. Adm. Code 309.155 (NPDES Permits), 309.208 (Permits for Sites Receiving Sludge for Land Application), 703.121 (RCRA Permits), 807.202 (Solid Waste Permits); Section 39(b) of the Act (NPDES Permits); Section 405(b) of the federal Clean Water Act (federally-imposed sludge use and management requirements); and 40 CFR 501 and 503.
Sample 1Sample 2Sample 3

Examples of Sludge requirements in a sentence

  • The POTW has an approved pretreatment program in accordance with and to the extent required by part 403; provided, however, a POTW which does not have an approved pretreatment program may, pending approval of such a program, condi- tionally give credits as provided in paragraph (d) of this section.(iv) Sludge requirements.

  • Sludge requirements for the facility are outlined in the permit and defined in the sludge attachment.

  • Th e P OTW ha s an a pp r oved p r e t r e a tm e n t p r og ra m i n a cco r d an ce wi t h an d t o t h e ex t e n t r eq u i r ed b y p ar t 403; p r ovided, h oweve r , a P OTW w h ic h does n o t ha ve an a pp r oved p r e t r e a tm e n t p r og ra m m ay , pe n di n g a pp r ov a l of s u c h a p r og ra m , co n di- t io na ll y give c r edi t s a s p r ovided i n p ara g ra p h ( d) of t h is sec t io n .( iv) Sludge requirements.


More Definitions of Sludge requirements

Sludge requirements means any of the following permits or regulations: 35 Ill. Adm. Code 309.155 (NPDES Permits), 309.208 (Permits for Sites Receiving Sludge for Land Application), 703.121 (RCRA Permits), 807.202 (Solid Waste Permits), the federal Toxic Substances Control Act (15 USC 2601), or the federal Marine Protection, Research and Sanctuaries Act (33 USC 1401), Section 39(b) of the Act (NPDES Permits) [415 ILCS 5/39(b)], and Section 405(b) of the federal Clean Water Act (federally-imposed sludge use and management requirements).
Sample 1Sample 2Sample 3
Sludge requirements means any of the following permits or regulations: 35 Ill. Adm. Code 309.155 (NPDES Permits), 309.208 (Permits for Sites Receiving Sludge for Land Application), 703.121 (RCRA Permits),
Sample 1Sample 2Sample 3
Sludge requirements means the following statutory provisions and regulations or permits issued there- under (or more stringent State or local regulations): Section 405 of the Clean Water Act; the Solid Waste Disposal Act (SWDA) (including title II more commonly referred to as the Resource Conservation Recovery Act (RCRA) and State regulations contained in any State sludge management plan pre- pared pursuant to subtitle D of SWDA); the Clean Air Act; the Toxic Sub- stances Control Act; and the Marine Protection, Research and Sanctuaries Act.
Sample 1Sample 2
Sludge requirements means the federal statutory provisions, regulations, and permits under Code of Federal Regulations, title 40, section 403.7(a)(1)(ii), and provisions applicable to the use or disposal of solids from POTWs under chapters 7011, 7035, 7041, 7045, and 7050, and permits issued under those chapters.
Sample 1Sample 2
Sludge requirements means the following statutory provisions and regulations or permits issued thereunder (or more stringent local regulations): section 405 of the Clean Water Act; the Solid Waste Disposal Act (SWDA) (including Title II more commonly referred to as the Resource Conservation and Recovery Act (RCRA) and State regulations contained in any State sludge management plan prepared
Sample 1
Sludge requirements means the federal statutory provisions, regulations,
Sample 1

Related to Sludge requirements

  • Maintenance Requirements shall have the meaning set forth in Clause 14.2;

  • Pretreatment requirements means any substantive or procedural requirement related to pretreatment, other than a pretreatment standard, imposed on an industrial user.

  • MREL Requirements means the laws, regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities applicable to the Issuer and/or the Group, from time to time, (including any applicable transitional or grandfathering provisions), including, without limitation to the generality of the foregoing, any delegated or implementing acts (such as regulatory technical standards) adopted by the European Commission and any regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities adopted by the Federal Republic of Germany or the Republic of Italy, a relevant resolution authority or the European Banking Authority from time to time (whether or not such requirements, guidelines or policies are applied generally or specifically to the Issuer and/or the Group), as any of the preceding laws, regulations, requirements, guidelines, rules, standards, policies or interpretations may be amended, supplemented, superseded or replaced from time to time.

  • OHS Requirements means all Laws applicable to the Supply and related to occupational health or safety, and all of the City Policies that relate to occupational health or safety, and includes without limitation the WCA;

  • Project Requirements means the statement included in the Request for Proposal detailing the technical and other requirements of Canada which are to be met by the successful Bidder, and which are to be addressed in the Bid;

  • Performance Requirements The ordering entity reserves the right to inspect and verify that all deliveries are in accordance with specifications, both at the point of delivery and at the point of use. For orders that specify an “authorized party” to receive and inspect deliveries and/or installations, acceptance and inspection procedures must be performed by the” authorized party” to be considered and accepted by the ordering entity. Products inspected at the time of use are subject to refusal and return requirements for issues of quality such as defects in manufacturing and/or workmanship. Products will not be considered accepted by the ordering entity until the installation is complete for the applicable products.

  • Storage Injection Requirements means all volumes required by the Seller for injection into underground storage, including cushion gas, and for liquification, including fuel used for injection and in liquification plants, or for such other storage projects that may be developed expressly for the protection of supply to high priority users.

  • Environmental and Safety Requirements means all federal, state, local and foreign statutes, regulations, ordinances and similar provisions having the force or effect of law, all judicial and administrative orders and determinations, all contractual obligations and all common law concerning public health and safety, worker health and safety and pollution or protection of the environment, including all such standards of conduct and bases of obligations relating to the presence, use, production, generation, handling, transport, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, chemical substances or mixtures, pesticides, pollutants, contaminants, toxic chemicals, petroleum products or by-products, asbestos, polychlorinated biphenyls (or PCBs), noise or radiation.

  • Service Requirements means the specification that the Flexibility Services must be capable of meeting, as defined in Schedule 1;

  • Insurance Requirements means all terms of any insurance policy required by this Agreement and all requirements of the issuer of any such policy and all orders, rules and regulations and any other requirements of the National Board of Fire Underwriters (or any other body exercising similar functions) binding upon Landlord, Tenant or the Leased Property.

  • Technical Requirements means the Technical Requirements in Section VII of the tendering documents.

  • Operational requirements means the need to ensure that the Agency is to be operated as effectively, efficiently and economically as possible.

  • Safety Requirements means Prudent Electrical Practices, CPUC General Order No. 167, Contractor Safety Program Requirements, and all applicable requirements of Law, PG&E, the Utility Distribution Company, the Transmission Provider, Governmental Approvals, the CAISO, CARB, NERC and WECC.

  • Debt Service Requirements means the aggregate principal payments (whether at maturity or pursuant to scheduled mandatory sinking fund redemption requirements) and interest payments on the Bonds for the period of time for which calculated; provided, however, that for purposes of calculating such amount, principal and interest shall be excluded from the determination of Debt Service Requirements to the extent that such principal or interest is payable from amounts deposited in trust, escrowed or otherwise set aside for the payment thereof with the Paying Agent or other commercial bank or trust company located in the State and having full trust powers.

  • Minimum Balance Requirements You must maintain a minimum daily balance of $2,000.00 in your Money Market Savings account to obtain the disclosed annual percentage yield. We impose a monthly maintenance fee if the balance falls below $500 any day of the month. Basic Checking Account Rate Information: This account does not pay interest.

  • Applicable Requirements means all applicable federal, state and local laws, regulations, rules, ordinances, codes, decrees, judgments, directives, or judicial or administrative orders, permits, licenses, authorizations, approvals and other duly authorized actions of any federal, state, local or other governmental regulatory or administrative agency, court, commission, department, board, or other governmental subdivision, legislature, rulemaking board, tribunal, or other governmental authority having jurisdiction, NYISO, NYSRC and NPCC requirements, and any applicable reliability standards.

  • Design requirements means the written description of the infrastructure facility to be procured pursuant to this article, including:

  • Statement of Requirements means a statement issued by the Authority or any Other Contracting Body detailing its Services Requirement issued in accordance with the Ordering Procedure;

  • Program Requirements means that Partner has to fulfill certain program requirements as described in detail in the applicable SAP PartnerEdge Model and the PartnerEdge Program Guide.

  • Security Requirements means the requirements regarding the security of Personal Data, as set out in the Data Protection Laws (including, in particular, the seventh data protection principle of the DPA and/ or the measures set out in Article 32(1) of the GDPR (taking due account of the matters described in Article 32(2) of the GDPR)) as applicable;

  • Minimum Requirements means the minimum requirements for available commercial structures. The minimum requirements may be found at this link: https://portlandgeneral.com/energy- choices/renewable-power/green-future-impact The minimum requirements may be updated from time to time to reflect PGE’s criteria from its latest Commission accepted renewable request for proposals.

  • Authority Requirements means the operational requirements, functions and characteristics of the Framework set out in Schedule 1 (Statement of Requirements)

  • Perfection Requirements means the making or procuring of filings, stampings, registrations, notarisations, endorsements, translations and/or notifications of any Finance Document (and/or any Security created under it) necessary for the validity, enforceability (as against the relevant Obligor or any relevant third party) and/or perfection of that Finance Document.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Jurisprudence requirement means the assessment of an individual's knowledge of the laws and rules governing the practice of physical therapy in a state.

  • Requirements of Environmental Law means all requirements imposed by any law (including for example and without limitation The Resource Conservation and Recovery Act and The Comprehensive Environmental Response, Compensation, and Liability Act), rule, regulation, or order of any federal, state or local executive, legislative, judicial, regulatory or administrative agency, board or authority in effect at the applicable time which relate to (i) noise; (ii) pollution, protection or clean-up of the air, surface water, ground water or land; (iii) solid, gaseous or liquid waste generation, treatment, storage, disposal or transportation; (iv) exposure to Hazardous Substances; (v) the safety or health of employees or (vi) regulation of the manufacture, processing, distribution in commerce, use, discharge or storage of Hazardous Substances.