Solenoid Power Supply. The solenoid power supply must be rated properly following the maximum ratings for the solenoid electromagnet VT-68970 (or equivalent) realized by Canon. The provider must specify and notify to INFN-LNF, the maximum ratings for the solenoid electromagnet in terms of electrical specifications and cooling. The RF Source shall be composed of: - C-Band 20 MW high repetition rate (400Hz) klystron, Canon model E37217 (comply with the specifications listed in Tab.5); - solenoid focusing magnet model Canon VT-68954 or equivalent adapted to work with the specified klystron: - Klystron X-ray shield - Klystron Lifting attachment - high voltage solid state pulsed power modulator (negative polarity); - transformer oil - filament heater power supply; - core bias power supply; - solenoid focusing magnet power supply; - ion pump and solenoid power supply; - the cooling system with flow meter diagnostics; - oil tank with oil leak retention tray and X-ray shielding; - oil tank humidity sensor; - mineral high voltage oil; - a control-command system; - Remote control via Modbus TCP - Trigger and protection interlock system; - Digitizer for Modulator diagnostics - RF digitizer for monitoring RF signals (Forward and Reflected power) at the klystron output. The RF driver amplifier will be provided by INFN-LNF. Free space in the modulator rack must be reserved for installing the RF driver amplifier model AM61-5.7S-56-56R (Microwave Amps Ltd). Canon tube, model E37217 (C-Band, 20 MW, 2.5µs, 400Hz) must be used as reference. The main requirements of the klystron are listed in table 2.
Solenoid Power Supply. The solenoid power supply must be rated properly following the maximum ratings for the solenoid electromagnet VT-68954 realized by Canon (or equivalent). The provider must specify and notify to INFN-LNF, the maximum ratings for the solenoid electromagnet in terms of electrical specifications and cooling. The following specifications must be considered valid for both sources.