Advanced Options Sample Clauses

Advanced Options. In this section you can specify the reson for signing a PDF document , location and contact information. Reason for signing a document contains the following by default: • this document is ready for review; • I am the author of this document; • I have reviewed this document; • I am approving this document; • this document is ready for review; • this document is ready for approval; • document is certified; • document is released; • I have reviewed specified portions of this document; You can define your own reason for signing a document by editing any of the options above. Once you are done with this a signature appearance needs to be defined by clicking on the New button in the Signature Appearance section. If you do not want to do that the standard appearance will be used. In case you would like to make your signature invisible instead of Standard Appearance select Invisible then click New to create the digital signature. To modify the default settings click Edit. The window below will be displayed: In the General section you can specify on which page to place the signature. If zero (0) is entered your signature will be automatically placed on the last page. In case the PDF document already contains a digital signature field that you want to use, type its name in the Replace existing textbox. Position: here you can enter the X and Y values in points that determine where on the selected page(s) your signature is placed. If you use positive values the coordinate system origin will be in the upper left corner. In case negative values are used the coordinate system origin will be in the lower right corner.
Sample 1Sample 2
AutoNDA by SimpleDocs
Advanced Options. The Advanced Options screen is where you edit the advanced option settings for the profiling feature to be used with the project template. This screen appears when you touch Advanced Options on the Profile Settings screen. The Advanced Options screen has two tabs, Ink Controls and Table Options. The Advanced Options screen also has one button at the bottom: OK Touch this button to save the edits you have made to the advanced options, close the Advanced Options screen, and return to the Profile Settings screen. Ink Controls Tab The Ink Controls tab has the following controls: GCR/UCR Controls how black ink is substituted for CMY. • GCR (Gray Component Replacement). Select to substitute black ink for some amount of CMY throughout an entire image based on the Black Generation Type box. In GCR, based on the combination of GCR amount and the black generation type, this will replace a part of the whole CMY image with black ink. As you select higher values, more gray components are replaced by black ink, and the high chroma colors that contain little gray component will increase. Touch this button to open a dialog box where you can touch or type the percentage. • Black Generation Type. Select the relative amount of black ink to be used: None, Light, Medium, or Heavy. • UCR (Under Color Removal). Select to substitute black ink for some amount of CMY only in the neutral and shadow areas of an image. When selected, the Black Generation Type box is dimmed. Maximum Black Ink The maximum amount of black ink available for printing. The default setting is 100%. Caution: Do not change the default when profiling a digital printer. Touch this button to open a dialog box where you can touch or type the percentage. Total Coverage Area (TAC) The maximum amount of all inks available for printing. The default setting is the value of the Pre-Ink Limit setting of the Profile Chart. You can decrease this setting, but you cannot increase it. Touch this button to open a dialog box where you can touch or type the percentage. Table Options Tab The Table Options tab has the following controls: Rendering Intent Select to setup profiling for specific types of printed material. • Perceptual. A method to convert colors while maintaining the total tone balance. Select to render the closest possible perceptual match, while preserving subtle color relationships, by compressing the entire color gamut and shifting all colors into the printable color gamut. This intent is suitable for converting ...
Sample 1
Advanced Options. To change the advanced options of the TRAQC-8 DPC select the menu “advanced options” in the “main menu” and press ‘ENTER’ key (F1) to continue. Use the ‘ARROW’ keys to set the password’s numbers and press ‘ENTER’ key (F1) to continue. The password is ‘2098’.
Sample 1
Advanced Options. ‌ Figure 19: Screenshot Advanced options If Show advanced options is used three different types for the hash algorithm for the signing can be chosen. Default is SHA512. If the maximum allowed valid period is 6 month for accounts with less than 50 VP and 2 years for accounts with at least 50 VP. The start date can be changed from now to max 14 days in the future by selecting the appropriate date from the dropbox. The period length can be changed by entering the number of years (y) or month(m) or the end date (yyyy-mm-dd).
Sample 1
Advanced Options. ‌ The additional options that can be ordered are not tied to a single product. They are available as a subscription for all virtual servers (e.g. additional storage can be split among several virtual servers). Advanced Options - Additional storage - Additional internal virtual network - Additional external virtual network (incl. 1 mapped IP address) - Managed VPN access (Ikev2) - Snapshots
Sample 1
Advanced Options. 2.11.1 Changing the Port By default VisNetic WebMail uses the ports 32000 and 32001. This means that an awkward URL has to be remembered or the webmaster must employ other means to hide this. Web Mail shares the port with the VisNetic MailServer Control Service which is 32000 by default. If you want to change the port do so in the VisNetic MailServer user interface, located on the System Tab, Ports field. Note: if you need to bind VisNetic WebMail to an individual IP address then edit the Bind_To_IP parameter. Change the port parameter to 80 and the SSL-Port to 443, save the file then restart the VisNetic WebMail service. Inside your VisNetic WebMail installation directory there is a directory called config.cfg. Find the file config.cfg inside of this. [Settings] Port=32000 SSL_Port=32001 Logging=0 Logging_Path= Bind_To_IP= [Virtual-Host] ; [hostname] = [base path] With these virtual host changes complete, port 32000 will no longer need to be specified in the URL.
Sample 1

Related to Advanced Options

  • Prior Options No prior options or rights of first refusal have been granted by Seller to any third parties to purchase or lease any interest in the Property, or any part thereof, which are effective as of the execution date.

  • Stock Options With respect to the stock options (the “Stock Options”) granted pursuant to the stock-based compensation plans of the Company and its subsidiaries (the “Company Stock Plans”), (i) each Stock Option intended to qualify as an “incentive stock option” under Section 422 of the Code so qualifies, (ii) each grant of a Stock Option was duly authorized no later than the date on which the grant of such Stock Option was by its terms to be effective (the “Grant Date”) by all necessary corporate action, including, as applicable, approval by the board of directors of the Company (or a duly constituted and authorized committee thereof) and any required stockholder approval by the necessary number of votes or written consents, and the award agreement governing such grant (if any) was duly executed and delivered by each party thereto, (iii) each such grant was made in accordance with the terms of the Company Stock Plans, the Exchange Act and all other applicable laws and regulatory rules or requirements, including the rules of the New York Stock Exchange and any other exchange on which Company securities are traded, and (iv) each such grant was properly accounted for in accordance with GAAP in the financial statements (including the related notes) of the Company and disclosed in the Company’s filings with the Commission in accordance with the Exchange Act and all other applicable laws. The Company has not knowingly granted, and there is no and has been no policy or practice of the Company of granting, Stock Options prior to, or otherwise coordinating the grant of Stock Options with, the release or other public announcement of material information regarding the Company or its subsidiaries or their results of operations or prospects.

  • Layoff Options An employee who is issued layoff notice shall elect one (1) of the following options within two (2) calendar weeks:

  • Additional Options The NYS Contract Price for Additional Options offered under the Contract in accordance with Section III.2.7 Additional Options, shall be the Additional Options NYS Discount listed on the Contract Pricelist, or higher, applied to the MSRP on the current OEM Data Book or Contractor-Published Pricelist, as applicable. See Section III.1.2

  • Pay Options 16.1 All wages due shall be paid weekly directly into an employee’s nominated bank account.

  • Equity Awards You will be eligible to receive awards of stock options or other equity awards pursuant to any plans or arrangements the Company may have in effect from time to time. The Board or Committee, as applicable, will determine in its sole discretion whether you will be granted any such equity awards and the terms of any such award in accordance with the terms of any applicable plan or arrangement that may be in effect from time to time.

  • Options Unless otherwise mutually agreed among the Parties, the Interconnection Customer shall select the In-Service Date, Initial Synchronization Date, and Commercial Operation Date; and either Standard Option or Alternate Option set forth below for completion of the Participating TO's Interconnection Facilities and Network Upgrades as set forth in Appendix A, Interconnection Facilities, Network Upgrades, and Distribution Upgrades, and such dates and selected option shall be set forth in Appendix B, Milestones.

  • Awards (1) The tribunal, in its award, shall set out its findings of law and fact, together with the reasons therefore, and may, at the request of a Contracting Party, award the following forms of relief:

  • Cash Option [ ] (a) The Employer may permit a Participant to elect to defer to the Plan, an amount not to exceed % of any Employer paid cash bonus made for such Participant for any year. A Participant must file an election to defer such contribution at least fifteen (15) days prior to the end of the Plan Year. If the Employee fails to make such an election, the entire Employer paid cash bonus to which the Participant would be entitled shall be paid as cash and not to the Plan. Amounts deferred under this section shall be treated for all purposes as Elective Deferrals. Notwithstanding the above, the election to defer must be made before the bonus is made available to the Participant.

  • ONE OF THE TWO OPTIONS BELOW I DO CLAIM parts of my proposal to be confidential and DO NOT desire to expressly waive a claim of confidentiality of all information contained within our response to the solicitation. The attached contains material from our proposal that I classify and deem confidential under Texas Gov't Code Sec. 552 or other law(s) and I invoke my statutory rights to confidential treatment of the enclosed materials. IF CLAIMING PARTS OF YOUR PROPOSAL CONFIDENTIAL, YOU MUST ATTACH THE SHEETS TO THIS FORM AND LIST THE NUMBER OT TOTAL PAGES THAT ARE CONFIDENTIAL. ATTACHED ARE COPIES OF PAGES OF CLAIMED CONFIDENTIAL MATERIAL FROM OUR PROPOSAL THAT WE DEEM TO BE NOT PUBLIC INFORMATION AND WILL DEFEND THAT CLAIM TO THE TEXAS ATTORNEY GENERAL IF REQUESTED WHEN A PUBLIC INFORMATION REQUEST IS MADE FOR OUR PROPOSAL. Signature Date OPTION 2: OR I DO NOT CLAIM any of my proposal to be confidential, complete the section below.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!