An example of PCP Sample Clauses

An example of PCP. QUACO A Pre-Commercial Procurement (PCP) initiative was funded by EU under the name QUACO (H2020 PCP - Grant Agreement no.689359). The project run in collaborative effort among four partners of AMICI, CERN, CEA, CIEMAT, NBCJ coordinated by CERN, around the development of the Q4-MQYY full scale quadrupole magnet prototypes for HL LHC project. In the case of the QUACO PCP, the starting point is the functional specification of the MQYY magnet. QUACO is organized in three competitive phases: conceptual design (4 months), engineering design and mock-ups (13 months), prototype- manufacturing phase (18 months). Four firms started the project. From one phase to the next, one firm is eliminated based on technical, quality assurance and project management evaluations. At the end of Phase 3 scheduled in June 2020, two firms will remain and deliver a MQYY prototype ready for test. The phase I and II of the project concluded successfully. 4 companies (3 SMEs) were engaged in phase I and in phase II, 3 of those have produced extended analysis, engineering designs and mock-ups to demonstrate viability for a final manufacturing of the Q4. Companies were engaged into innovative, and in some cases, unprecedented technologies routes for this type of magnets. Examples of innovation solutions investigated as spin-off from QUACO are described below: - Shrink-fit solution for magnet collaring. Azimuthal pre-stress of the coil is obtained with an oversize spacer and with the thermal shrinkage of Al collars. It is the first time this method is used for a 2-1 quadrupole manufacturing. - Bladder & Keys for magnet assembly: an outer Al shell contains the forces during operation and provides additional compressive stress to the magnet after cooling down. It is again the first time Bladder & Keys technology is used for a quadrupole manufacturing. - Modular tools: Modular tooling concepts, which can easily be adapted to different size of similar magnets: a relevant cost reduction strategy for manufacturing and time to market. The studied solutions are all very interesting for accelerator technology but only 2 companies have accessed the last phase of the project because PCP does not allow to proceed with 3 companies. After manufacture completion of the two prototypes in June 2020, the tests of the prototypes are expected to take place at CEA Saclay in a test cryostat. Different lessons were learned from QUACO experience. The tendering in Phases is well-appreciated by suppliers. No cruci...
Sample 1
AutoNDA by SimpleDocs

Related to An example of PCP

  • Long Term Cost Evaluation Criterion 4. READ CAREFULLY and see in the RFP document under "Proposal Scoring and Evaluation". Points will be assigned to this criterion based on your answer to this Attribute. Points are awarded if you agree not increase your catalog prices (as defined herein) more than X% annually over the previous year for the life of the contract, unless an exigent circumstance exists in the marketplace and the excess price increase which exceeds X% annually is supported by documentation provided by you and your suppliers and shared with TIPS, if requested. If you agree NOT to increase prices more than 5%, except when justified by supporting documentation, you are awarded 10 points; if 6% to 14%, except when justified by supporting documentation, you receive 1 to 9 points incrementally. Price increases 14% or greater, except when justified by supporting documentation, receive 0 points. increases will be 5% or less annually per question Required Confidentiality Claim Form Required Confidentiality Claim Form This completed form is required by TIPS. By submitting a response to this solicitation you agree to download from the “Attachments” section, complete according to the instructions on the form, then uploading the completed form, with any confidential attachments, if applicable, to the “Response Attachments” section titled “Confidentiality Form” in order to provide to TIPS the completed form titled, “CONFIDENTIALITY CLAIM FORM”. By completing this process, you provide us with the information we require to comply with the open record laws of the State of Texas as they may apply to your proposal submission. If you do not provide the form with your proposal, an award will not be made if your proposal is qualified for an award, until TIPS has an accurate, completed form from you. Read the form carefully before completing and if you have any questions, email Xxxx Xxxxxx at TIPS at xxxx.xxxxxx@xxxx-xxx.xxx 8 Choice of Law clauses with TIPS Members If the vendor is awarded a contract with TIPS under this solicitation, the vendor agrees to make any Choice of Law clauses in any contract or agreement entered into between the awarded vendor and with a TIPS member entity to read as follows: "Choice of law shall be the laws of the state where the customer resides" or words to that effect. 9

  • Long Term Cost Evaluation Criterion # 4 READ CAREFULLY and see in the RFP document under "Proposal Scoring and Evaluation". Points will be assigned to this criterion based on your answer to this Attribute. Points are awarded if you agree not i ncrease your catalog prices (as defined herein) more than X% annually over the previous year for years two and thr ee and potentially year four, unless an exigent circumstance exists in the marketplace and the excess price increase which exceeds X% annually is supported by documentation provided by you and your suppliers and shared with TIP S, if requested. If you agree NOT to increase prices more than 5%, except when justified by supporting documentati on, you are awarded 10 points; if 6% to 14%, except when justified by supporting documentation, you receive 1 to 9 points incrementally. Price increases 14% or greater, except when justified by supporting documentation, receive 0 points. increases will be 5% or less annually per question Required Confidentiality Claim Form Required Confidentiality Claim Form This completed form is required by TIPS. By submitting a response to this solicitation you agree to download from th e “Attachments” section, complete according to the instructions on the form, then uploading the completed form, wit h any confidential attachments, if applicable, to the “Response Attachments” section titled “Confidentiality Form” in order to provide to TIPS the completed form titled, “CONFIDENTIALITY CLAIM FORM”. By completing this process, you provide us with the information we require to comply with the open record laws of the State of Texas as they ma y apply to your proposal submission. If you do not provide the form with your proposal, an award will not be made if your proposal is qualified for an award, until TIPS has an accurate, completed form from you. Read the form carefully before completing and if you have any questions, email Xxxx Xxxxxx at TIPS at xxxx.xxxxxx@t xxx-xxx.xxx

  • Long Term Cost Evaluation Criterion # 4. READ CAREFULLY and see in the RFP document under "Proposal Scoring and Evaluation". Points will be assigned to this criterion based on your answer to this Attribute. Points are awarded if you agree not i ncrease your catalog prices (as defined herein) more than X% annually over the previous year for years two and thr ee and potentially year four, unless an exigent circumstance exists in the marketplace and the excess price increase which exceeds X% annually is supported by documentation provided by you and your suppliers and shared with TIP S, if requested. If you agree NOT to increase prices more than 5%, except when justified by supporting documentati on, you are awarded 10 points; if 6% to 14%, except when justified by supporting documentation, you receive 1 to 9 points incrementally. Price increases 14% or greater, except when justified by supporting documentation, receive 0 points. increases will be 5% or less annually per question Required Confidentiality Claim Form Required Confidentiality Claim Form This completed form is required by TIPS. By submitting a response to this solicitation you agree to download from th e “Attachments” section, complete according to the instructions on the form, then uploading the completed form, wit h any confidential attachments, if applicable, to the “Response Attachments” section titled “Confidentiality Form” in order to provide to TIPS the completed form titled, “CONFIDENTIALITY CLAIM FORM”. By completing this process, you provide us with the information we require to comply with the open record laws of the State of Texas as they ma y apply to your proposal submission. If you do not provide the form with your proposal, an award will not be made if your proposal is qualified for an award, until TIPS has an accurate, completed form from you. Read the form carefully before completing and if you have any questions, email Xxxx Xxxxxx at TIPS at xxxx.xxxxxx@t xxx-xxx.xxx Choice of Law clauses with TIPS Members If the vendor is awarded a contract with TIPS under this solicitation, the vendor agrees to make any Choice of Law c lauses in any contract or agreement entered into between the awarded vendor and with a TIPS member entity to re ad as follows: "Choice of law shall be the laws of the state where the customer resides" or words to that effect. 5 Agreed Venue of dispute resolution with a TIPS Member In the event of litigation or use of any dispute resolution model when resolving disputes with a TIPS member entity a s a result of a transaction between the vendor and TIPS or the TIPS member entity, the Venue for any litigation or ot her agreed upon model shall be in the state and county where the customer resides unless otherwise agreed by the parties at the time the dispute resolution model is decided by the parties. Agreed

  • Job Evaluation Plan (a) The Employer agrees that no job evaluation plan pertaining to positions covered by this Agreement will be introduced without the mutual agreement of the Parties.

  • Benefit Level Two Health Care Network Determination Issues regarding the health care networks for the 2017 insurance year shall be negotiated in accordance with the following procedures:

  • Reportable Events under Section III J.1.c. For Reportable Events under Section III.J.1.c, the report to OIG shall include:

  • EMPLOYEE EVALUATION 14.1 The purpose of employee evaluation is to support decisions concerning employee discipline, promotion and improvement. Evaluation shall be the responsibility of the immediate supervisor who shall not be a member of the bargaining unit.

  • Cost for Service and Charge Methodology – POS to The NWSA Service Area and Department (Acct if appropriate) Service Item (from list above) Method of Charges1 Basis for Charge Hourly Rate, Fixed Percentage or Formula 2021 Budgeted Amount2 Commission Office Dept #1200 3.a Fixed Based upon agreed amount of $250,000 per year. $250,000

  • EMPLOYEE EVALUATIONS 3. Any matter for which there is recourse under State or Federal statutes.

  • Unbundled Network Terminating Wire (UNTW) 2.8.3.1 UNTW is unshielded twisted copper wiring that is used to extend circuits from an intra-building network cable terminal or from a building entrance terminal to an individual End User’s point of demarcation. It is the final portion of the Loop that in multi-subscriber configurations represents the point at which the network branches out to serve individual subscribers.

Time is Money Join Law Insider Premium to draft better contracts faster.