Breach Responsibility Sample Clauses

Breach Responsibility. 10.1 If Party B fails to deliver the products in accurate quality and quantity according to the manufacture schedule which is not attribute to force majeure, Party B shall take breach responsibility of delay in delivery and compensate the economic losses to Party A. If Party B fails to deliver the products over seven (7) days, Party A has the right to require Party B’s affiliate company (but it shall be the processing factory of Coca-cola (China) Beverages Co., Ltd.) to supply the products with same price to Party A; or Party A is entitled to purchase the products from other processing factories which are recognized by Coca-cola (China) Beverages Co., Ltd., and Party B shall pay the incurred additional amount for Party A. If Party A can not acquire the replacement products immediately due to Party B’s nonperformance, Party B shall compensate all the losses to Party A, including but not limited to, extra losses and benefit losses incurred by the supply interruption. If Party B fails to deliver the products over fifteen (15) days, Party A is entitled to terminate this contract, and Party B shall compensate the actual losses arising out of this contact’s termination to Party A. 10.2 If the products delivered by Party B are inconsistent with any specification required by Coca-cola (China) Beverages Co., Ltd. or any condition specified in Party A’s inspection standards through sampling acceptance or sampling acceptance in market (including sampling by governmental department or Coca-cola (China) Beverages Co., Ltd.), through both parties’ confirmation, Party B will recall such inconsistent products which are attributed to Party B immediately and destroy such products under Party A’s supervision and bear the incurred losses.
Sample 1Sample 2
AutoNDA by SimpleDocs
Breach Responsibility. In the case that any party fails to perform their obligations as stated in this Agreement, the party shall compensate all the economic losses of the observant party who suffered therefrom.
Sample 1
Breach Responsibility. If Alnylam becomes aware of a material breach of the provisions of any Third Party Collaboration Agreement by a Third Party Partner, compliance with which is necessary for Alnylam’s compliance with these Regional License Terms, Alnylam shall promptly notify Genzyme of the particulars of the same and use Commercially Reasonable Efforts to cause the Third Party Partner to comply with all the provisions of the Third Party Collaboration Agreement necessary for Alnylam’s compliance with these Regional License Terms. Notwithstanding any Third Party Collaboration Agreement, Alnylam shall remain primarily liable to Genzyme for the performance of all of Alnylam’s obligations under, and Alnylam’s compliance with all provisions of, these Regional License Terms with respect to the entire Alnylam Territory. CERTAIN CONFIDENTIAL PORTIONS OF THIS EXHIBIT WERE OMITTED AND REPLACED WITH “[***]”. A COMPLETE VERSION OF THIS EXHIBIT HAS BEEN FILED SEPARATELY WITH THE SECRETARY OF THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION REQUESTING CONFIDENTIAL TREATMENT UNDER RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934. REGIONAL LICENSE TERMS
Sample 1
Breach Responsibility. The Receiving Party shall at any time be fully liable for any and all breaches of the confidentiality obligations in Section 16 by any of its Affiliates or the employees, consultants, potential and actual acquirers, and representatives of itself or its Affiliates.
Sample 1
Breach Responsibility. If either party violates this contract, it should compensate the direct losses suffered by another party. If both parties in this contract are in breach they should undertake their liabilities respectively due the violation. It does not mean the waive if a party does not give a notice to the party this is in breach. Any waive to the violation of this contract does not constitute the waive to any other violation of this contract. In any cases, special, occasional or indirect compensation such as surplus losses, profitable losses or losses in economical advantage in future due to performance or non-performance of this contract will not 'be borne by either party.
Sample 1
Breach Responsibility. In any cases the receiving party disobeyed the agreement, that will cause infringement consequence to the disclosed party. As a result, the receiving party will take all responsibility of the actual losses for the disclosed party due to the behavior for breaching of this contract.
Sample 1
Breach Responsibility. 1. If Party B fails to pay the price of transfer (RMB 0) to Party A at the time specified in the Agreement; 2. Unless otherwise specified in the Agreement, if either one of the Parties breached the Agreement, the breaching party shall pay 0% of the total price of transfer as damages at the first month. 3. If either party fails to settle the procedures required in change of shareholder registration as specified in the Agreement, the non-breaching party shall be entitled to discharge the Agreement after 5 days of the execution of the Agreement.
Sample 1
AutoNDA by SimpleDocs
Breach Responsibility. If Alnylam becomes aware of a material breach of the terms of any Third Party Collaboration Agreement by a Third Party Partner compliance with which is necessary for Alnylam’s compliance with the terms of this Agreement, Alnylam shall promptly notify Genzyme of the particulars of the same and use Commercially Reasonable Efforts to cause the Third Party Partner to comply with all the terms of the Third Party Collaboration Agreement necessary for Alnylam’s compliance with the terms of this Agreement. Notwithstanding any Third Party Collaboration Agreement, Alnylam shall remain primarily liable to Genzyme for the performance of all of Alnylam’s obligations under, and Alnylam’s compliance with all terms and conditions of, this Agreement with respect to the entire Alnylam Territory.
Sample 1

Related to Breach Responsibility

  • Client Responsibility For clarity, the parties agree that in reviewing the documents referred to in clause (b) above, Patheon’s role will be limited to verifying the accuracy of the description of the work undertaken or to be undertaken by Patheon. Subject to the foregoing, Patheon will not assume any responsibility for the accuracy of any application for receipt of an approval by a Regulatory Authority. The Client is solely responsible for the preparation and filing of the application for approval by the Regulatory Authority and any relevant costs will be borne by the Client.

  • Joint Responsibility If the Seller determines that the Interface Problem is attributable partially to the design of a Warranted Part and partially to the design of any Supplier Part, the Seller will, if so requested by the Buyer, seek a solution to the Interface Problem through cooperative efforts of the Seller and any Supplier involved. The Seller will promptly advise the Buyer of such corrective action as may be proposed by the Seller and any such Supplier. Such proposal will be consistent with any then existing obligations of the Seller hereunder and of any such Supplier towards the Buyer. Such corrective action, unless reasonably rejected by the Buyer, will constitute full satisfaction of any claim the Buyer may have against either the Seller or any such Supplier with respect to such Interface Problem.

  • Your Responsibility You are solely responsible for the quality, completeness, accuracy, validity and integrity of the image. You are solely responsible if you, intentionally or unintentionally, submit fraudulent, incorrect or illegible images to us or if Mobile Deposit is used, by authorized or unauthorized persons, to submit fraudulent, unauthorized, inaccurate, incorrect or otherwise improper or unusable images to us.

  • Waiver of responsibility 1. Any appraisal of the Programme undertaken before or after its approval by the FMC, does not in any way diminish the responsibility of the National Focal Point and the Programme Operator to verify and confirm the correctness of the documents and information forming the basis of the programme agreement. 2. Nothing contained in the programme agreement shall be construed as imposing upon the FMC or the FMO any responsibility of any kind for the supervision, execution, completion, or operation of the Programme or its projects. 3. The FMC does not assume any risk or responsibility whatsoever for any damages, injuries, or other possible adverse effects caused by the Programme or its projects including, but not limited to inconsistencies in the planning of the Programme or its projects, other project(s) that might affect it or that it might affect, or public discontent. It is the full and sole responsibility of the National Focal Point and the Programme Operator to satisfactorily address such issues. 4. Neither the National Focal Point, the Programme Operator, entities involved in the implementation of projects, nor any other party shall have recourse to the FMC for further financial support or assistance to the Programme in whatsoever form over and above what has been provided for in the programme agreement. 5. Neither the European Free Trade Association, its Secretariat, including the FMO, its officials or employees, nor the FMC, its members or alternate members, nor the EFTA States, can be held liable for any damages or injuries of whatever nature sustained by the National Focal Point or the Beneficiary State, the Programme Operator, Project Promoters or any other third person, in connection, be it direct or indirect, with this programme agreement. 6. Nothing in this programme agreement shall be construed as a waiver of diplomatic immunities and privileges awarded to the European Free Trade Association, its assets, officials or employees.

  • Customer’s Responsibility The policies in this document apply to the use of Data by Customers, Redistributors and their End Customers. Customers are responsible for compliance with this policy by all members of the Customer’s Group and by all persons to whom they distribute Data where authorised to do so. Turquoise recommends that Customers make this Schedule available to all Subscribers to their services having access to Data which is subject to Charges, reporting requirements or usage restrictions.

  • Responsibility for Damage Resident is solely responsible for any damage, defacement or loss arising within the assigned bedroom space. All assigned residents of an apartment are jointly and severally responsible for any damage, defacement or loss to common areas, other parts of the Property, fixtures or appliances, except for the portion of damages over $100,000 where it is finally established that Resident or one or more other residents of the apartment were solely at fault for the entire loss, in which case such person(s) will be solely responsible. Resident is fully responsible for the conduct of Resident’s guests, visitors, licensees and invitees (“Guests”), including without limitation harm to individuals or damage or defacement of any part of the Property or its fixtures or property of third parties (including other residents) by such Guests.

  • Customer Responsibility You agree that you are responsible for all access to and use of the Service through your account or password(s) and for any fees incurred for the Service, or for software or other merchandise purchased through the Service, or any other expenses incurred in accordance with the terms of this Agreement. You agree that you are responsible for backing up (a) any data you submit, receive or transfer over the Service, including, without limitation, your email; and (b) any data, files, programs, or applications on any device you connect to the Service. You acknowledge that you are aware that content accessible on or through the Service may contain material that is unsuitable for minors (persons under 18 years of age). You agree to supervise usage of your account by minors. You ratify and confirm any obligations incurred by a minor using your account.

  • Cost Responsibility Interconnection Customer shall be responsible for and shall pay upon demand all Costs associated with the interconnection of the Customer Facility as specified in the Tariff. These Costs may include, but are not limited to, an Attachment Facilities charge, a Local Upgrades charge, a Network Upgrades charge and other charges. A description of the facilities required and an estimate of the Costs of these facilities are included in Sections 3.0 and 4.0 of the Specifications to this ISA.

  • Responsibility for Damages Contractor is responsible for all damage that occurs as a result of Contractor’s fault or negligence or that of its’ employees, agents, or representatives in connection with the performance of this Contract. Contractor shall immediately report any such damage to people and/or property to the Contract Administrator.

  • Payment Responsibility The payment obligations of each Participating Manufacturer pursuant to this Agreement shall be the several responsibility only of that Participating Manufacturer. The payment obligations of a Participating Manufacturer shall not be the obligation or responsibility of any Affiliate of such Participating Manufacturer. The payment obligations of a Participating Manufacturer shall not be the obligation or responsibility of any other Participating Manufacturer. Provided, however, that no provision of this Agreement shall waive or excuse liability under any state or federal fraudulent conveyance or fraudulent transfer law. Any Participating Manufacturer whose Market Share (or Relative Market Share) in any given year equals zero shall have no payment obligations under this Agreement in the succeeding year.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!